Mixed Media Floral Z-Fold Card

This cheery floral z-fold card made with Mixed Media Floral designer series paper from Stampin’ Up was so easy and quick to make.     

To create this card, you just need a few things:

  • Daffodil Delight card stock
  • White card stock
  • Mixed Media Floral designer series paper
  • Mixed Florals stamps and dies
  • Mixed Labels stamps and dies
  • Basic Black ink
  • Calypso Coral Dark Stampin’ Blends ben
  • Scissors
  • Scoring board or scoring blade for paper trimmer
  • Paper trimmer
  • Adhesive of choice

Take the Daffodil Delight card stock and cut to 5 ½” x 11” and score at 3 3/8” and 6 ¾” and fold.  With the white card stock cut two pieces 3 1/8” x 5 ¼” and one to 4” x 5 ¼”.  From the Mixed Media Floral designer series paper pack, find the piece with the mixed florals of yellow cone flowers and peach tulips.  Hand cut around the flowers with the even portion on the right side and up to the large cone flower on the right side.  Then cut another portion of the two cone flowers from the rest of the left side to use in the middle section. 

Note:   The other easier option if you don’t care about the additional flowers on the middle panel is to not cut the white cardstock, but to just cut your Mixed Media Floral designer series paper to the three sizes of the white card stock and then you don’t have to the cutting out of the flowers.  The other just ads a bit more dimension and I wanted the additional flowers in the middle section.

Take the first 3 1/8” piece of white card stock and line up the right side of the floral paper you cut out to line the right and bottom, and cut to size.  Take the second 3 1/8” piece of white card stock and cut the next section of the floral paper to match for the lower portion and use the piece of two cone flowers you cut separate to the right and line up to look like they go together.  Then take the 4” x 5 ¼” piece of white card stock and line up and cut the last section of the floral paper to match.  Adhere all pieces to the white portions and adhere to the Daffodil Delight card base. 

With the Mixed Florals stamp set, stamp two ladybugs with the Basic Black ink, color them in with the Dark Calypso Coral Stampin’ Blends pen.  Die cut out each of the ladybugs and adhere one to the white portion of the middle panel and the other to the upper right side of the back panel.  With the Mixed Labels stamp set and the Basic Black ink, stamp the small “Thank You” and cut out with the small label die and then cut out the next size up label die in Daffadil Delight and adhere together and to the upper left corner of the back panel of the card. 

That is all it takes to make this cute card. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Everyday Happiness Double Concertina Interlocking Card

I just love this card, the front is pretty as a card all on it own, but then you open it up and the real card is on the inside.  It is also made with the Everyday Happiness designer series paper from Stampin’ Up which I am infatuated with right now, it is just so beautiful.  This card is a full-size card at 5” x 7” but could be done as a 4 ¼” x 5 ½” card as well.  I made this for a good friend’s 50th so wanted the larger size. 

To create this card, you just need a few things:

  • Everyday Happiness designer series paper
  • Wild Wheat card stock
  • White card stock
  • Wild Wheat ink
  • With You in Mind stamp set
  • Nested rectangle dies, one about 3” x 4 ¼” and the next size down
  • Banner die
  • Number dies
  • Scoring board or scoring blade for paper trimmer
  • Paper trimmer
  • Adhesive of choice
  • Scissors
  • Pop-Dots

This card is not hard to make but it has a lot of cutting for the different layers of paper.  Since this is a full-size card, it takes a bit more paper.  With White card stock, cut the following:

  • One piece to 7” x 10 ½” scored on the long edge at 5” and 10”
  • One to 7” x 10” scored on the long edge at 5”
  • One to 3 ¾” x 9 ¾” scored at 4 7/8”
  • Two pieces to 2 ½” x 3 ¾” each scored at ½” and 2”

With the Wild Wheat card stock cut two pieces to 2 ¾” x 4 1/8” and one to 3 ¼” x 4 ½”.

Grab your Everyday Happiness designer series paper.  Take a piece with the swoops of blue, gold and white.  Cut three pieces to 4 ¾” x 6 ¾”.  With the floral piece cut two pieces to 4 ¾” x 6 ¾” and one to 4 ½” x 6 ½”.  With the blue plaid paper cut two pieces to 3 ½” x 4 ¾” and two pieces to 1 ¼” x 3 ½”. 

With the White card stock pieces cut to 7” x 10 ½” and the 7” x 10 pieces, fold both pieces at the 5” score mark and with the fold pointing down fold the ½” mark down as well.  Then adhere the second piece of card stock, also with the fold pointing down to the ½” piece, forming a “W” shape. 

Take the two pieces of the swoops designer series paper that you cut to 4 ¾” x 6 ¾” and the largest of the two nested rectangle dies and cut the rectangle out of the center of both.  Adhere these to the two center pieces of your base White card stock.  Take the smaller rectangle die and place the die in the center of your swoops cut out and cut out the smaller rectangle.  Keep all of these cut out pieces to use later.  Now take the two floral pieces you cut to 4 ¾” x 6 ¾” and adhere on the front and back panel of the inside of your card. 

Let’s start making the interlocking piece.  Take the piece of white card stock cut to 3 ¾” x 9 ¾” and fold in half.  Then take the two pieces of white card stock cut to 2 ½” x 3 ¾” and fold each into a “U” shape.  Adhere one side of the “U” to the back of the 3 ¾” x 9” ¾” piece and the other to the other end, both each with the “U” facing to the center.  Take the four pieces of blue plaid you cut earlier and adhere the two small pieces to the ends and the two larger pieces to the center panels.

Take the two White card stock rectangle pieces you cut from the card center cut-outs and the two Wild Wheat pieces you cut to 2 ¾” x 4 1/8” and adhere the White to the Wild Wheat.  With a scrap piece of the blue with polka dots cut cut 5 banner pieces and use four of them to adhere to the tops of the two pieces in whatever arrangement you like.  With the While Wheat ink and the With You In Mind stamp set, stamp the “Happy Birthday” after stamping off first. 

Use a number stamp set or dies to add the age if desired to the second.  Adhere each piece to the front center panels. 

Now take that and put through the center of the card base and fold to align the center piece in the center and to the back.  Open the front panel trying to keep the rest aligned and put adhesive on the ½” strip then lay flat and fold the front of the card onto it to align.  Do the same for the back. 

Now for the front of the card, take the last swooped paper and the last floral piece and adhere together and then to the front of the card.  Then the piece of Wild Wheat and one of the cut-outs of the swooped paper.  Stamp a greeting in the center of the swooped paper.  Cut out a few of the flowers and leaves and adhere to the upper left corner and lower right corner and use the last banner you cut to put in the upper right corner.

There is your Everyday Happiness double concertina interlocking happy birthday card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Memorable Blooms Window Card

Using Blackberry Bliss and this lovely Bloom Impressions designer series paper from the 2025 Sale-a-bration make a rich and elegant card. 

To create this card, you just need a few things:

  • Blackberry Bliss card stock
  • White card stock
  • Bloom Impressions designer series paper from 2025 Sale-a-bration
  • Memorable Blooms stamp set and dies
  • Blackberry Bliss ink
  • Paper trimmer
  • Adhesive of choice

Take your piece of Blackberry Bliss card stock and cut your card base to 5 ½” x 8 ½” and fold in half to measure 4 ¼” x 5 ½”.  Also cut a piece to ¾” x 4”.  Find the blackberry floral piece in the Bloom Impressions designer series paper pack from the 2025 Sale-a-bration pack.  Cut two pieces to 4” x 5 ¼” and one piece to 3 ¾” x 5” and another to ½” x 4”.  Take on of the 4” x 5 ¼” pieces using the plain non-floral side and the 3 ¾” x 5” piece with the floral side.  Adhere the floral piece to the plain piece and then the plain piece to the front of your card base, but only putting adhesive along the outer edges so that you can use the cut out pieces from the window. 

Take your outer octagon die and cut out your windows toward the top of your card front.  Now take the blackberry bliss piece from your window cut out and cut out the floral die cut from the center of it.  Now take the plain purple piece from the window cut out and adhere it to the back of the floral cut out.  Grab the white piece of card stock you cut for the inside and adhere it on the inside.  Put adhesive on the back of the floral piece, close your card front and adhere the floral piece into the windows so it is lined up when you open the card. 

With your Blackberry Bliss ink and the two strips of white and purple, find the “you mean the world to me” stamp from the Memorable Blooms stamp set and stamp it onto the white strip.  Adhere the white strip to the purple strip and adhere the purple strip centered at the bottom of your card front. 

That is all it takes to make this elegant window card. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Thoughtful Journey Hot Air Balloon Card

This easy card was fun to make and was so quick.  My friend gave me the Spellbinders Advent Christmas set for Christmas, and it was so much fun.  I got to open a spot every day and it had dies, stencils, embellishments and stamps.  This hot air balloon die set was one of the first days I got so wanted to get to use it.  Then using it with some of the beautiful paper from Stampin’ Ups Thoughtful Journey designer series paper pack was just a perfect combination. 

To create this card, you just need a few things:

  • Fresh Freesia card stock
  • Petunia Pop card stock
  • White card stock
  • Thoughtful Journey designer series paper from Stampin’ Up
  • Hot Air Balloon dies from Spellbinders
  • Fresh Freesia ink
  • Thin twine
  • Paper trimmer
  • Corner Rounder
  • Adhesive of choice
  • Pop-Dots

Take your Fresh Freesia card stock and cut a piece to 5 ½ x 8 ½” and fold in half to 4 ¼” x 5 1/2” for your card base.  If you have a corner rounder that will cut through two layers then round the corners, if you don’t then you can skip that step through out the instructions.  Find a piece of designer series paper from the Thoughtful Journey pack that has some good sky for your hot air balloon and matches the Fresh Freesia.  I used the piece with the pine trees as I thought it added a bit of depth, but there was another piece as well that had more sky over a lake that would also work.  Cut this to 4” x 5 ¼” and round the corners

With some scraps of Petunia Pop card stock and your hot air balloon dies, cut the background balloon, the banner and the Hello banner (which came with the hot air balloon dies).  With a scrap of a tan or brown cut the basket and with some scraps of Fresh Freesia cut the three stripes for the balloon.  Adhere the three stripes to the balloon and then add the banner.  Take two pieces of twine and adhere to the basket and then to the balloon to show the basket floating below the balloon. 

Take your Fresh Freesia card base and your Thoughtful Journey paper and adhere to the front of the card base.  Then add pop dots to the back of your balloon and basket and adhere to the front of your card.  Then I cut to small pieces of a pop dot and added to the back of the Hello banner and adhered to the bottom right of the card. 

For the inside of your card, cut a piece of white card stock to 4” x 5 ¼” and round the corners.  Take the leftover piece of your Thoughtful Journey paper and cut a piece to 1 ¾” x 5” and round the two corners to the left and adhere to the left of the inside of your card.  Take the Mixed Labels stamp set and your Fresh Freesia ink and stamp the “just a note to let you know you’re on my mind” to the upper right of the white portion. 

Adhere your white piece to the inside of your card. 

That is all there is to making this cute hello card to let someone know you are thinking of them. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Thoughtful Journey Slant Front Card

The paper in the Thoughtful Journey designer series paper pack from Stampin’ Up is so beautiful that it doesn’t need much help with decoration, it is the star of every card it is used on. 

To create this card, you just need a few things:

  • Petunia Pop card stock
  • Fresh Freesia card stock
  • Thoughtful Journey designer series paper
  • Memorable Blooms stamp set
  • Fresh Freesia ink
  • Brushed Brass Butterfies embellishments
  • Scoring board or scoring blade for your paper trimmer
  • Paper trimmer
  • Adhesive of choice

With your Petunia Pop card stock cut a card base to 4 ¼” x 10” and score at 5 ½”.  Fold on the score mark.  With the Fresh Freesia card stock cut a piece to 4” x 4 3/8” and a second piece to 4” x 5 ¼” for the inside.  Then choose a piece of the Thoughtful Journey designer series paper that matches the card stock and cut to 3 ¾” x 4 1/8” and a piece to 1” x 3 ¾”.  I choose the one with bunches of purple flowers, but you could also use one of the two thistle papers.  Layer your Thoughful Journey piece on top of the smaller Fresh Freesia and then onto the shorter front piece of your card base, all aligned to the right end of the front and cut your slant so they will all align when you adhere them.  Once cut, you can then adhere the Fresh Freesia to the Petunia Pop card front and the Thoughtful Journey piece on to that. 

Take your inside piece of Fresh Freesia you cut earlier and adhere to the inside of your card.  Now with the “Thanks so much” stamp from the Memorable Blooms stamp set from Stampin-Up and your Fresh Freesia ink and stamp your greeting in the upper right corner centering in the space.  With your Brushed Brass Butterflies embellishments, adhere a few to the front of your card and one with your greeting.  With the 1” x 3 ¾” piece of Thoughtful Journey paper, adhere that to the left side of the inside of your card for decoration. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading