This Wishing You Well angled z-fold card is fun to make and so fun and bright, it just makes you smile.
To create this card you just need a few things:
Daffodil Delight card stock
White card stock
Floral Delight designer series paper pack
Delightful Wishes stamp and die bundle
Lemon Lolly ink pad
Daffodil Delight ink pad
Old Olive ink pad
Pecan Pie ink pad (I didn’t have so I used Copper Clay ink pad instead)
Paper trimmer
Scissors
Adhesive of choice
With a piece of Daffodil Delight card stock, cut your card base to 5 ½” x 11”. Score at 3 3/8” and at 6 ¾”. Cut the angle staring in the upper right-hand corner and down to 3” at the left side. Fold into the z-shape on the left side of the card.
Take the Floral Delight designer series paper pack and pull out three pieces to use, I used the floral doily, gingham and flowers on stick papers. Take the flowers on stick paper and cut a piece 4” x 5 ¼” and angle from 5 ¼” on the right down to 4 3/8” on the right. Then cut a piece of the gingham to 3 1/8 x 4 ¼” and angle this from 4 ¼” on the right side down to 3 ½” on the left side and a piece of white card stock to the same dimensions but angle to the right. Now take the floral doily piece and cut it to 3 1/8” x 3 3/8” and angle from the right side down to 2 5/8” on the left.
With a piece of spare white card stock and the Delightful Wishes stamp set. Stamp the filled in floral stamp in the Lemon Lolly ink, then use the highlight floral stamp in Daffodil Delight ink and line up and stamp over the Lemon Lolly. Now use the Pecan Pie ink (or in my case the Copper Clay ink as I couldn’t find my Pecan Pie ink pad) and line up and stamp the stem. Then take the Old Olive ink with the leave stamp and line up and stamp the leaves. This gives you a beautiful floral decoration for the front of your card, you will need to cut out the floral decoration by hand.
Take a piece of Daffodil Delight card stock and white card stock and use the two wishing dies from the Delightful Wishes die set. Cut the think wishing out of the Daffodil Delight and the background wishing out of the white. Adhere together. Use the long label die from the die set and cut out a label. Use the Old Olive ink and stamp the You Well onto the label. The cut off the other end of the label by lining it up to cut it to your desired length. Adhere the wishing die cut to the front of your card down toward the bottom, the “g” will hang off a bit over the middle. Adhere the You Well center below the wishing. The adhere the floral decoration you created above and hanging over the angle. Adhere the white angled piece to the inside on the back center angle.
This is such a bright card, but it just makes me happy to look at it. I just love it and I am not a big fan of bright colors.
To create this card, you just need a few things:
Melon Mambo card stock
White card stock
Bloom Impressions Designer Series Paper from the 2025 Sale-a-bration
Jet Black Staz-On ink pad
Melon Mabo ink pad
Thoughtful Expressions stamp set and dies
Stampin’ Blends pens
Melon Mambo Light
Melon Mambo Dark
Shy Shamrock Light
Shy Shamrock Dark
Daffodil Delight Dark
Paper trimmer
Adhesive of choice
Pop-Dots
Take the Melon Mambo card stock and cut your base card to 4 ¼” x 8 ¾” and another piece 3” x 3”. Score the 4 ¼” x 8 ¾” at 5 ½” and fold to make your card base. With the white card stock cut a piece to 4” x 5 ¼” , one to 3 1/8” x 4” and another to 2 ¾” x 2 ¾”. Now pick your floral designer series paper from the Bloom Impressions paper pack and cut one piece 3” x 3 ¾” and another to 2” x 3 ¾”.
Take the 4” x 5 ¼” piece of white cards stock and adhere the floral paper piece measuring 2” x 3 ¾” to on end of it, then adhere that to the inside of your card base. Then get the 3 1/8” x 4” piece of white card stock and adhere the 3” x 3 ¾” floral piece and then adhere that to the front short piece of your Melen Mambo card front. When closed it should look like it is all one piece.
Take your 3” x 3” Melon Mambo piece and put adhesive on one half and then adhere that lined up with the front short ends and with the edge of the right side of the card as shown below.
Then adhere the white card stock that measures 2 ¾” x 2 ¾” piece to that Melon Mambo diamond. Take the “enjoy your day” stamp and use Melon Mambo ink to stamp the greeting in the left corner. Use a small piece of the leftover floral paper and cut out one of the floral groupings, then apply pop-dots to the back and adhere to the bottom portion of the diamond.
Now take your Jet Black Staz-On ink and the hummingbird stamp from the stamp set and stamp the hummingbird onto an extra piece of white card stock. Take the Melon Mambo light Stampin’ Blends pen to color the through and belly of the hummingbird and then highlight with the dark Melen Mambo Stampin’ Blends pen. Then use the light Shy Shamrock Stampin’ Blends pen to color the upper portion of the head and lower portion of the wing and back, then use the dark Shy Shamrock Stampin’ Blends pen to color the upper portion of the wings and the tail feathers. Use the dark Daffodil Delight Stampin’ Blends pen to color the beak.
Cut the hummingbird out with the hummingbird die, put pop-dots on the back and adhere it to the right side of the diamond on the front of your card with the upper wings and tail feathers hanging out of the diamond, but make sure it isn’t crossing over your card base.
Take another small leftover piece of white card stock and stamp the small spray flowers. Use the light Melen Mambo Stampin’ Blends to color the flowers and the light and dark Shy Shamrock Stampin’ Blends to color the leaves. Use the die and cut out the flowers and adhere that to the left inside corner of the card.
I am not usually a bright card fan, but I love this card and all the colors, it is just cheerful.
This is a pretty straight forward easy card that is so cute. With the Floral Delight designer series paper from Stampin’ Up, it is just so cheery and bright.
To create this card, you just need a few things:
Lemon Lolly card stock
White card stock
Floral Delight designer series paper
Large floral piece (both sides)
Dainty little flower piece
Spring Corners stamp set
Three rectangle nesting dies – I used the Stampin’ Up Rectangle Stitched dies
Old Olive ink
Lemon Lolly ink
Old Olive Stampin’ Write marker
Paper trimmer
Scoring board or scoring blade for your paper trimmer
Adhesive of choice
Pop-Dots
With your Lemon Lolly piece of card stock, cut a piece to 5 ½” x 8 ½” and fold in half to 5 ½ x 4 ¼”. Take the white card stock and cut to 5” x 8” and score at 2”, 4” and 6”. Fold the 2” part down, the 6” part down and the 8” part up. Take the dainty flower paper from the Floral Delight designer series paper and cut a piece to 4” x 5” and score in half at 2”. Fold that in half and adhere to the 4” and 6” center sections of your scored white card stock (see photo below).
Take your largest of the tree nested rectangular dies and center it at the front half of your Lemon Lolly base and cut the front panel. Then use the back of the large floral piece of designer series paper that is Old Olive and cut a rectangle with the middle size die. Then take some white card stock and cut the smallest size rectangle. Take the front side of the large floral designer series paper and cut out one of the flowers for the front of your card.
Now grab your Spring Corners stamp set and stamp the “you brighten my day” stamp toward the top of the white rectangle piece and adhere your cut out flower to the bottom of the white piece. Adhere the white rectangle to the Old Olive rectangle and then the Old Olive rectangle to the Lemon Lolly rectangle.
With your Spring Corners stamp set and the Old Olive ink stamp the “happy we are friends” corners stamp in the upper right corners of the back of your white card stock insert. Then take the little coneflower stamp and ink it with your Lemon Lolly ink pad and then take your Old Olive Stampin’ Write Market with the large calligraphy end and ink the stems and leaves of the stamp and also the flower centers. Huff (blow a warm breath onto the stamp to re-moisten then stamp it in the center of your “happy we are friends” on the back of your card insert.
Lets assemble the card. Take your white insert piece and the card base, and on the inside front cover of your card base put adhesive to the center edge of your cut out and across the top and bottom of your cut out halfway, but make sure that you leave a half inch without adhesive at the top and bottom. Now adhere the front 2” white section of your cardstock to the back of your cutout on the card base. Now put adhesive on the back of your back white panel, fold it all to the front of the card and then close the back of the card which will align it so it will open to the square it needs to.
All that is left to do is put adhesive on the back left side of your rectangle cutout and adhere that to the dainty floral side with the card closed so you can just put it back in the cut-out, so it is lined up properly.
This beautiful tri-fold valentine card is so fun to make and give to anyone. It is very basic wit just some cutting, scoring, folding and die cutting a bunch of different hearts and the arranging them however you like.
To create this card, you just need a few things:
Real Red card stock
Flirty Flamingo card stock
White card stock
Variety of heart dies and\or punches
Paper trimmer with a scoring blade or a score pad
Adhesive of choice
Pop-Dots
Take your Real Red card stock and cut a piece 5 ½ x 8 ¼”. Then you will need to score that at 2 1/8”, 3 1/8”, 5 1/8” and 6 1/8”. Then fold accordingly to fold your card as below.
Then take your pink Flirty Flamingo card stock and cut two pieces to 1 7/8” x 5 ¼” and one piece to 1 ¾” x 5 ¼”. Now with the white card stock cut two pieces to 1 5/8” x 5” and one piece to 1 ½” x 5”. Layer each of the two 1 5/8” white pieces onto the 1 7/8” pink pieces and then the one piece of 1 ½” while onto the 1 ¾” pink piece. The single size piece goes into your middle layer and the two pieces go on the front and back panels.
Now just die cut and\or punch a bunch of different heart shapes, sizes and decorations and arrange them how you like on each panel. Just make sure they show how you want when the panels are flat as well. I put the big red heart on the front panel and then placed the rest around that so they all showed nicely. I also put a few of the hearts on the front panel on pop-dots just to add some depth. I also found a cute little saying and put it on at tag on the front large heart.
I made this lovely guy card for my husband for his birthday but wanted to share it as well. Another card that is easy to make as long as you have the Deer in the Forest Background die from Inlovearts. Excluding the dies, the rest of the card is made with Stampin’ Up products.
To create this card you just need a few things:
Crumb Cake card stock
Blue Plaid paper from the Timeless Plaid designer series paper pack
Boho Blue card stock
White card stock
With You in Mind stamp set
Inlovearts Deer in the Forest Background Die
Inlovearts Deer in the Forst Frame Die Set using the small deer die
Twine
Paper trimmer
Adhesive of choice
For the base card cut a piece of Boho Blue card stock to 4 ¼” x 5 ¾”, the background die is 5 ½” so you need to make your card slightly larger than normal. Take your blue plaid piece of designer series paper and cut that to 4 1/8” x 5 5/8” and a strip cut to 1” x 4” for the inside of your card. Then cut your Crumb Cake card stock to 4 ½” x 5 ¾” just to give you some space for the die to cut out. You will also need a piece of white card stock cut to 4” x 5 ½” for the inside of your card.
Grab your piece of Crumb Cake card stock and the Deer in the Forest background die and cut out the deer in the forest. Take your twine and using two holes in the upper left corner tie a bow. Then adhere your brown deer background to blue plaid paper, and adhere to plaid paper to the front of your blue card front.
Now take the white piece of card stock for the inside of your card and adhere the plaid 1” x 4” strip toward the bottom of it, leaving about ¼” of white showing at the bottom. Now take a small piece of Crumb Cake card stock and your small deer die and cut out the deer. Adhere that just above the plaid strip in the lower right corner of your inside piece. Use the Happy Birthday stamp from the With You in Mind stamp set from Stampin’ Ups’ January to April 2025 Mini Catalog along with Crumb Cake ink to stamp your greeting.
This is an easy card to make for the men in your life.
This adorable card is so easy to make and hardly even requires stamping, it is mainly using the cut-outs that come with the Wildflower Birthday Designer Series Paper pack from Stampin’ Up’s January-April 2025 Mini catalog. It comes with the normal double-sided paper and then two sheets to cut-outs as well.
To create this card you just need a few things:
White card stock
Peach Pie card stock
Wildflower Birthday Designer Series Paper pack
Peach Pie ink pad
Paper trimmer
Adhesive of choice
Pop-Dots
To start cut your Peach Pie card stock into 4 ¼” x 11” and fold in half to 4 ¼” x 5 ½”. Then cut another piece of the Peach Pie card stock to 2 ¾” x 4 ¼”. Now take your piece of white card stock and cut two pieces to 4” x 5 ¼” and another to 2 ½” x 4”. The last is to take a piece of the Peach Pie Daisy paper from your Wildflower Birthday Designer Series Paper pack and cut a piece 3 ¾” x 5”. That takes care of all the cutting.
Let’s build our layers for the front of the card. Take your card base and adhere one of the 4” x 5 ¼” pieces of white card stock to the front of the card. Then adhere your Peach Pie Daisy piece of card stock onto the white. Add the 2 ¾” x 4 ¼” piece of Peach Pie card stock and then lastly the 2 ½” x 4” white piece of card stock. From the Wildflower Birthday pack take the larger peach cake cut-out from one of your pieces, along with one of the very small flower groupings and one of the cupcakes, I used the one with the peach paper and teal frosting.
First, take the small flower cut-out and adhere it to the cake base for decoration, then take the cake cut-out and add Pop-Dots to the back of the cake and adhere it to the center of the top white piece of card stock to finish the front of your card.
Take the last piece of white card stock for the inside of your card and adhere the cupcake to the lower right corner. For the inside greeting I used the Delightful Wishes stamp and die set where I took my Peach Pie ink and stamped “wishing” onto a piece of white card stock and then took the wishing die and cut out my stamped wishing. I adhered that to the top of the white card stock inside piece. Finally, I stamped “you a happy birthday” under the wishing die cut greeting. Now adhere your white inside piece to the inside of your card.
Wasn’t that easy and quick, and it is such a cute card.
These are all birds we were lucky enough to see and\or learn about during our safaris in Kenya.
Perching Birds
Cape Starling or Cape Glossy Starling (Lamprotornis Nitens) – Found mainly in southern Africa and lives in wooded or bushy shrub areas. In non-breeding season (March – August) they will flock into large groups. They are cavity nesters. They usually forge on the ground for insect larvae, grasshoppers, ants and beetles, but also eat fruit when available.
Hildebrants Starling (Lamprotornis Hildebrandti) – These Hildebrants Starlings can be seen in Kenya and Tanzania. It likes wooded and thornbrush areas. Nesting is March-May and October-December and in Kenya sometimes May-June. There nexts are usually built in crevices and both parents are involved in feeding. They eat a variety of insects and fruit, mainly beetles and grasshoppers.
Lesser Masked Weaver (Ploceus Intermedius) – Found in eastern and southern Africa, the Lesser Masked Weavers build nests in large colonies in trees, woodland or thornbush areas with other weaver species. They breed from September – March.
Lilac-Breasted Roller (Coracias Caudatus) – Also known as the fork-tailed roller or lilac-throated roller . Found only in Africa, and lives in woodland and savanna areas. They nest in natural holes in trees and eggs are cared for by both parents. This is unofficially the national bird of Kenya. They migrate from Kenya to Somalia to breed from late April to mid-September. Nests are built flat built of grass in a variety of dead tree hollowed out holes or possibly in the side of termite mounds.
Shrike (Disambiguation) – Also know as butcherbirds as the males impale their prey (insects and lizards) onto plant spines. They may not eat their prey, or not all of it and will store it for later. They are known to be able to imitate their prey vocally to lure them in. In some cases they eat a toxic type of grasshopper called Lubber grasshopper so they will wait a day or two before eating for the toxins to degrade. Shirkes are found in Europe and Africa. They are territorial by pairs and they tend to be monogamous breeders. This photo was take of shirkes sitting on the back of a rhino.
Superb Starling (Lamprotornis Superbus) – This species can live up to 15 years. Very similar looking to the Hildebrandt’s Starling, differentiated with the creamy-white eyes. They live in savanna, woodland or thornbush areas in Africa. Superb starlings are territorial during breeding season, but will flock with other species the rest of the year. Feeding is on small insects, termites, grasshoppers, ants and fruits.
White Bellied Go Away Bird (Crinifer Leucogaster) – They can be found in eastern Africa. Go Away birds fourth or outer toe can switch back and forth. Diet is mainly bananas or plantains giving them the nickname of banana-eaters. They live in wooded or savanna areas in families of up to 10 and do not migrate. They breed during rainy season and nests are built in acacia trees and both parents taking care of the eggs.
Ground Birds
Common Ostrich (Struthio Camelus) – Also known as the Maasai Ostrich. They are flightless birds but can run for long times at up to 34 mph (55 km/hr) or up to 60 mph (97 km/hr) for short burts. The main diet is plants but they will eat beetles of small lizards as well. They live in groups of 5-50 and during mating males will fight for harems of 2-7 females. If attacked or cornered they will kick with their strong legs. They are farmed across the world for feathers and their skin can be used for leather.
Helmeted Guineafowl (Numida Meleagris) – They are native to Africa but have been introduced to West Indies, North America, Colombia, Brazil, Australia and Europe. They live in flocks of about 25 during non-breeding season and tend to run instead of fly and can run very fast. With their sharp claws like chickens, they scratch and dig in the soil for food. They can also eat a large amount of ticks, if available and will eat beetles or similar during breeding season. Their lifespan is up to 12 years in the wild. There are very beautiful with lovely black and white feathers and colorful blue, red and yellow heads.
Yellow-Necked Spurfowl or Francolin (Pternistis Leucoscepus) – The yellow-necked spurfowl can be found in the Middle East and Africa. They tend to be active at dawn and dusk and can live in agricultural areas and areas until they are heavily populated by humans. Males can be detected by spurs on the back of their legs.
Kori Bustard (Ardeotis Kori) – The are the largest bird of flight in Africa, with the male being the heaviest living animal with the ability to fly. During breeding the makes try to breed with as many females as possible but don’t help with taking care of the eggs or raising the young. Kori Bustards living grassy areas that usually have sandy type soil. Nests are shallow holes in the ground, usually near trees.
Secretary Bird (Sagittarius Serpentarius) – The Secretary Bird is a large bird of prey that has a body similar to an eagle but with much longer legs. They live mainly in open grasslands and savanna regions. Secretary Birds are known for being snake killers, though most of their diet is insects and small vertebrates. They are called the Secretary Bird because when they are eating, they peck and pound their food and it looks like they are typing. Breeding can be any time of the year, but mainly in the dry season and nests are built up in thorny trees.
Hunting Birds
Augur Buzzard (Buteo Augur) – This photo is of a younger Augur as they are more brown in color when young, and much more black and white in adulthood. They are found in central, eastern and southern Africa and enjoy living around mountain, grasslands and savannah areas. Most of its prey is caught on the ground such as insects, reptiles, snakes, etc. Pairs usually mate for life and build large stick nests in trees and they often reuse their nests by just adding to them in the next season.
African Fish Eagle (Icthyophaga Vocifer) – Also known as an African Sea Eagle that is found the sub-saharan areas of Africa near large bodies of open water with grasslands, swamps, marshes near. Pairs breed during the dry season and are thought to mate for life. They maintain two or more nests and tend to reuse them and build them up over years. They nest are built of sticks and pieces of wood.
African Kite or Black Shouldered Kite – The African Kite is a small raptor type bird. Unlike other Kites, the African Kite is likely to scavenge for its food. The Kite can be found throughout Africa. It looked more like the Black Shouldered Kite but they appear to live in Australia.
Lappet-Faced Vulture (Torgos Tracheliotos) – Also known as the Nubian Vulture which is more closely related to eagles, buzzards and hawks and other vultures as it doesn’t have the great sense of smell of the other families. They live throughout Africa in dry savannah, deserts, and plains with scattered tree areas. As with most vultures, they are scavenger birds feeding on animal carcasses they fine left from an animal kill.
Tawny Eagle (Aguila Rapax) – Tawny Eagles can be found throughout Africa in dry savannas or desert areas but require some trees in the area. The Tawny Eagles often scavenge on other animals kills. They can live up to 16 years. They may hunt in pairs as we found this pair together on our journey and often pair for life. Breeding season ranges depending on the area of Africa. Nests are large platform style nests made of sticks and even sometimes animal bones and tend to be open to the sky.
Verreaux’s Eagle Owl (Ketupa Lactea) – Also known as an African Owl, Milky Eagle Owl or Giant Eagle Owl and is the largest owl found in Africa. It is a strong predator eats birds, insects, mammals or anything else it can find. They live in areas with scattered trees or thorny vegetation in savanna areas. Breeding can take place at any time during the year, but mainly from February to September. They are very territorial and the pair will defend their area. Normally they will use old nests built by other birds.
Cranes and Storks
Grey Crowned Crane (Balearica Regulorum) – Also known as the African Crowned Crane or Golden Crested Crane. The Grey Crowned Crane is found only in Africa and is the national bird of Uganda. The Grey and also Black Crowned Crane are the only crane species that can roost in trees. They live in dry savannah or Sub-Saharan areas but will nest closer to water. These Crowned Cranes are omnivores that eat anything from plants and seeds to insects, frogs, small fish, etc. Evenings are spent in trees resting and they hunt for food all day.
Marabou Stork (Leptoptilos Crumenifer) – Also called the Undertaker bird. This wading bird is native to sub-Saharan Africa. Breading is in wet and arid areas, usually near human habitation or landfills. Has the largest wingspan of any land bird. They breed in colonies during the dry season when food is more available and nest in trees They can live up to 25 years in the wild. They feed similar to vultures by scavenging for leftover corpses of other animal kills.
Saddlebill Stork (Ephippiorhynchus Senegalensis) – This is also a large wading bird that lives in Sub-Saharan Africa. Like most storks they fly with their neck stretched. They prefer protects open water areas. They build massive nest platforms that are used season to season and are solitary nesters, but are seen in pairs during the non-breeding season. They look for prey by stabbing their bill into the water, mud or vegetation.
White Stork (Ciconia Ciconia) – They eat a variety of insects, fish, reptiles, small mammals or small birds. The pair mate for life and any time of the year, with both of them building a large stick nest which is reused many times.
Yellow-Billed Stork (Mycteria Ibis) – We were not able to get a photo of the one. They live south of the Sahara and into Madagascar. They don’t really migrate but may move slightly due to rain. Wetlands like shallow lakes and mudflats. These storks like to follow crocodiles or hippos through the water and feed behind them on organisms they churn up. Breeding seems to be stimulated by peaks of heavy rainfall. For breeding, males select a nest site in trees and wait for females to approach them.
Water and Wading Birds
African Darter (Anhinga Rufa) – Also called the snakebird from swimming with only its head above water as they are don’t have oil in their feathers like most water birds so are not buoyant. Since their feathers are not waterproof like most birds, they are often seen with their wings out drying off (like the photo we got). They live in sub-Saharan Africa and Iraq in open water areas. They build stick nests in trees.
Avocet (Disambiguation) – Avocets have upcurved bills that they run side-to-side when feeding in the wetland waters they prefer. They nest in colonies on the ground with the nests lined with grass. Since they are usually in large colonies, they are fairly aggressive and chase off other species of birds that try to nest near them.
Black and White Stilt (Himantopus Himantopus) – Found in Africa, Asia and Europe and is part of the Avocet family. They breed in marshes, ponds and shallow lakes. They pick their food from the sand and water eating mainly insects and crustaceans. Nests are build in bare spots on the ground near the water and they usually nest in small groups.
Egyptian Goose (Alopochen Aegyptiaca) – They can be found in sub-Saharan Africa and along the Nile River Valley naturally, but they have been introduced in Europe and the United States. These geese tend to eat seeds, grass leaves and plant stems, but will also eat worms, locust or similar. The pair can be aggressive in their territory when breeding. They nests are built of reed, leaves and grass and the parir take turns sitting on the eggs. They usually mate for life. Egyptian Geese can live up to 15 years.
Great Egret (Ardea Alba) – They are also called the Common Egret, Great White Egret or Great White Heron and they considered part of the Heron family. Breeding is in colonies in trees near lakes with reed beds or wetlands. Males choose the nest area, start the nest which they do to attract a female. They gather food in shallow water or sometimes drier areas and eat mostly fish, frogs, amphibians, snakes or small animals like mice.
Great White Pelican (Pelecanus Onocrotalus) – Also known as Eastern White Pelican, Rosy Pelican or White Peleican. It breeds in swamps or shallow lakes in April or May. They are found in Europe to Asia and in Africa. This species of pelican is very social and form large flocks. Their diet is mainly fish.
Greater Flamingo (Phoenicopterus Roseus) – Found in Africa, Middle Ease, Europe, in the Persian Gulf, Gulf of Aden and the Red Sea. They live in mudflats and shallow coastal areas that contain salt water. They use their feet to stir up mud and blue-greenalgae, then suck the water through its beak to filter out shrimp, crustaceans, seeds algae and larve. One egg is laid on a mound they build of mud. They can live up to 40 years.
African Jacana (Actophilornis Africanus) – Also known as Jesus Bird or Lily Trotter due to being able to “walk on water” due to their long toes and nails that allow them to spread their weight to be able to walk on floating vegetation. With the Jacana’s the females are larger than males which is unusual, and the males are responsible for incubating the eggs and taking care of the chicks. They eat mainly insects and invertebrates plucked from floating vegetation or on the surface of the water and some seeds.
Kittlitz’s Plovers (Anarhynchus Pecuarius) – These small shorebirds breed near saltmarshes, river banks or alkaline grasslands. It lives in sub-Saharan Africa, the Nile Delta and Madagascar, they will migrate based on rainfall. They are social birds in non-breeding season and live in small flocks of around 20 in general but sometimes can be found in much larger flocks. Parents are very territorial and defensive until the eggs hatch and both parents look after the chicks.
Lesser Flamingo (Phoeniconaias Minor) – The Lesser Flamingo is the smallest of the Flamingos. Found in sub-Saharan African and western India. They feed mostly on algae in alkaline lakes but will also eat small invertebrates. The more blue-green algae they are able to eat, the more pink in color they are. Thousands used to migrate to Lake Nakuru for breeding, but with the changes in weather over the past few years, the water has become too high so many have moved to Amboseli and other areas of Kenya. As with most flamingos, they lay one egg on a mound built of mud.
Pied Kingfisher (Ceryle Rudis) – The Pied Kingfishers usually live in pairs or small groups. They are found in Africa and Asia. Their diet is made up mainly of fish but will also eat crustaceans and large aquatic insects. Nests are holes excavated in a vertical bud bank and about five feet above water with a chamber at the end. They are not territorial so several birds may nest in the same area. They sometimes reproduce “cooperatively” with young ones from the previous chicks helping or even unrelated older birds.
African Sacred Ibis (Threskiornis Aethiopicus) – The African Sacred Ibis is found in Africa and part of the Middle East. They may migrate due to rainfall. They dwell in marshy wetlands and mudflats. It will nest in trees or near water. Diet is mainly insects, worms, crustaceans, mollusks or other invertebrates and some fish. They breed once per year during the wet season from March to August. The nest is built of sticks in trees and they next in colonies with other wading birds. Once hatched one parent is always with the next for the first seven days and then will leave the nest to find food.
Spoonbill (Disambiguation) – These birds are found on every continent excluding Antarctica. They prefer fresh water to salt water, but can be found in either. To forge for food they move their bill side-to-side with their bill partially open and snap it close when insects, crustaceans or tiny fish are felt. They do pair for a season and nest in trees or reed beds. Males gather the sticks and reed to build the nest and the female makes it into a large, shallow next and both parents feed the chicks.
Visit by blog at www.daisychainfun.com to see other blog posts related to Kenya or other places we have visited.
If you would like a .pdf versions of this post, please email me at [email protected] and I will be happy to email you a copy.
Wikipedia was referenced for some of the detailed information in this post. Other supplied by our tour guides. All photos were taken by DaisyChianFun.
The Legendary Ride Authentic You birthday card is a fun card for the men in your life or for women who also enjoy motorcycles. This black and white car showcases the motorcycle.
Other items you will need are the following:
Legendary Ride stamp set
Legendary Ride die set or scissors
Basic Black card stock
Smokey Slate card stock
White card stock
Tire tread paper from the Legendary Rides paper pack
Basic Black ink pad
Metal Plate 3D embossing folder
Black or silver embellishment
Paper trimmer
Your preferred adhesive
Pop dots adhesive
A stamp block
Scissors
For the card base take a piece of basic black card stock and cut in half to 4 ¼” x 11” and then fold in half to 4 ¼” x 5 ½”. Then cut a pieces of white card stock to measure 4 1/8” x 5 3/8” for the front and a second to 4” x 5 ¼” for the inside. You will also need a piece of Smokey Slate card stock cut to 4” x 5 ¼”. Take the Tire tread paper and cut a piece to 2” x 4” and another to 1” x 4 ¼”.
Using the Metal Plate 3D embossing folder and the cut piece of Smokey Slate and emboss it. Adhere the piece of Smokey Slate to the front larger piece of White card stock. Then adhere this to the Basic Black card front. Now adhere the 2” x 4” piece of Tire Tread paper piece about a ½” or so down on the Smokey Slate embossed piece on the card front.
From the Legendary Ride stamp set, stamp the “Authentic You” stamp onto a piece of white card stock with Basic Black ink. Use the label die to cut a label. Adhere a black or silver embellishment to each side of the label for decoration. Put pop dots on the back of the label and adhere to the center of the Tire Tread paper.
Use another piece of White card stock and use your Basic Black ink pad to stamp the motorcycle from the Legendary Rides stamp set. Use the motorcycle die or scissors if you don’t have the die set to cut out the bike. Add pop dots to the back of the stamped motorcycle and adhere to the center of the bottom part of the grey on the card, about ¾” up from the bottom of the embossed Smokey Slate.
On the white card stock you cut for the inside of the card, adhere the 1” x 4 ¼” Tire Tread piece about ¼” up on the bottom. Take your Basic Black ink pad and the “Ride on it’s your birthday” stamp and stamp it toward the top of the white inside piece. Now adhere this to the inside of the card.
Z-fold cards are so fun and adorable, and this Double Z-fold card is even better and more fun as you can decorate across the second z-fold and\or on the card layers. This design takes that normal Double Z-Fold and flips it upside down as the second, smaller z-fold is usually toward the bottom. This makes it perfect for making cards with decorations that hang down.
You will need the following supplies to make this card:
Night of Navy card stock
White card stock
Mediterranean Blooms designer series paper
Two different blue pieces, one with a larger print and one with a smaller print
Citrus Blooms stamp set
Scissors to cut out images
Paper trimmer
Night of Navy ink pad
Your preferred adhesive
For the card base cut an 8 ½” x 11” piece of Night of Navy card stock to 8 ½” x 5 ½”. Take one piece and fold it in half to measure 4 ¼” x 5 ½”. Then take the top panel and fold it back again so the front panel measures 2 1/8” x 4 ¼” which forms your first Z-fold. Take the larger print blue designer series paper and cut two strips to 2” x 5 ¼” and adhere these to the two small flaps of your Z-fold card. Cut a piece of white card stock to 4” x 5 ¼” and adhere that to the back panel of your card.
Then take other half of Night of Navy card stock and cut a piece to 1 ¾” x 8 ½”. Now take the smaller blue print designer series paper and cut a strip to measure 1 ½” x 8 ¼”. Adhere the smaller print designer series paper to the center of the Night of Navy card stock. Now fold this strip in half to measure 1 ¾” x 4 ¼” with the floral side out. Take the bottom portion and fold the blue print designer series paper to each other to form your other Z-fold going the opposite direction measuring 1 ¾” x 2 1/8”.
Adhere the two Z-folds together by putting adhesive on the outer half of the under side of the long portion of the strip , make sure you don’t get the adhesive to far or your Z-fold will stick together. Then put glue on the bottom of the strip half fold and adhere that to the bottom part of your card. You now have your Double Z-fold.
Now it is time to do the decorations for the card. Take the lemon designer series paper and use your scissors to cut out the large double lemons grouping and then single lemon. Adhere the single lemon to the back portion of the card hanging off the smaller strip Z-fold. Take the large grouping and put adhesive on one half that will stick to the front of the card and then also a bit at the top to stick to the strip, but make sure there isn’t any adhesive that is going to hang out the back that will stick your card together.
The last thing to do is to add your greeting. I used the “wishing you the brightest birthday” stamp, stamped it in Night of Navy ink and stamped it on the white background on the back of the card in the space next to the lemons to make sure it wouldn’t show when the card was closed.
These cards are so easy to make, the paper does all the work using the Refeshed Beauty designer series papers from the Stampin-Up online exclusives in 2025. I bought this paper pack just for this piece of paper. It makes all three cards really easy, and a total of 6 with this one 12” x 12” piece of paper and some card stock.
You will need the following supplies to make all 3 cards:
One 8 ½” x 11” Flirty Flamingo card stock
Two 8 ½” x 11” Peach Pie card stock
The peach floral piece of designer series paper from the Refreshed Beauty paper pack
Thoughtful Expressions stamp set
Flirty Flamingo ink pad
Paper timmer
Your preferred adhesive
Cut a piece of Flirty Flamingo card stock and a piece of Peach Pie card stock in half in either direction. Fold one of the Flirty Flamingo halves and two of the Peach Pie halves in half to form your card base of 4 ¼” x 5 ½” size.
Now cut two Flirty Flamingo and one Peach Pie piece into a background piece measuring 4 1/8” x 5 3/8”. Then take your 12” x 12” piece of designer series paper and cut one of the floral sections to 5 ¼” x 12”. I suggestion you cut for the top first so you are not cutting flowers off and are leaving enough plain space at the top to stamp a greeting if you choose to. Then cut a bit off the bottom to make the 5 ¼” x 12” piece. Then cut that into three 4” x 5 ¼” pieces.
Get your Flirty Flamingo ink pad and your stamp set. Choose your word stamps to use. You can stamp them directly onto the floral designer series paper, or you can stamp them onto a small piece of Peach Pie to make a label. For the label version stamp it onto a piece 1” x 2” with a background piece of Flirty Flamingo cut to 1 1/8” x 2 1/8”. I made one with a label which I placed toward the bottom (shown below) and two stamped directly onto the paper stamped at the top on a plain section of the paper.
Adhere your three floral designer series paper pieces to the three background pieces you cut earlier, and then adhere the background to the front of your cards of the opposite color. If you made any labels then adhere them together and to your card placed where looks the best.
On the card base that is made from Flirty Flamingo, you will probably want to cut a piece of Peach Pie or White paper for an inside piece for your note and signature. You can also stamp another word stamp in here if preferred.
These were really fun and quick to make, with just a bit of cutting and stamping. I hope you enjoy the design.