Birthday Card – Welcome

Bloom Boutique Happy Birthday Card

May 29, 2026 No Comments

Used some angles for this card to give it a unique design. This beautiful floral paper from the Bloom Boutique designer series paper pack along with the stamps and dies of the Boutique Blossoms and Scalloped Blooms sets from Stampin’ Up made this lovely card.

To create this card, you just need a few things:

Crisp Cantaloupe card stock (2026-2028 In Color Stampin’ Up)
Petal Pink card stock (Stampin’ Up)
White card stock
Bloom Boutique designer series paper (2026 Annual Catalog Stampin’ Up)
Boutique Blossoms stamp set and dies (2026 Annual Catalog Stampin’ Up)
Scalloped Blooms stamp set (2026 Annual Catalog Stampin’ Up)
2026-2028 In Color Dots (2026-2028 In Color Stampin’ Up)
Crisp Cantaloupe ink (2026-2028 In Color Stampin’ Up)
Peaceful Pine Light Blender Pen (2026-2028 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For your card base cut a piece of Crisp Cantaloupe card stock to 4 ¼” x 11” and fold in half to 4 ¼” x 5 ½”. With your white card stock cut a piece for the front to 4 1/8” x 5 3/8” and one for the inside to 4” x 5 ¼”. From the Bloom Boutique designer series paper find the light colored florals with the crisp cantaloupe theme and cut a piece to 4” x 5 ¼”.

Take your floral piece and a piece of Crisp Cantaloupe and angle the Crisp Cantaloupe piece across the right side of your floral piece in about 1” on the top right corner and about 1 ½” on the bottom left corner, adhere down and then flip over and cut your edges of the Crisp Cantaloupe up to your floral piece edges. Now angle the Petal Pink piece across the bottom about ¾” up on the left side and about 2” up on the right side, adhere down and flip over and trip again to your floral piece edges.

Now with your Crisp Cantaloupe ink and the filled in daisy stamp from the Boutique Blossoms stamp set and stamp five flowers and cut them out with the die. Also, with a piece of white card stock use the large leave sprig die to cut out one and then take the Peaceful Pine Light Blender Pen and color in the leaves, gives a lighter sprig than cut direct from Peaceful Pine which was what I tried first. Adhere your leaves sprig on the center of the Crisp Cantaloupe part of your card front and then four of the flowers on pop dots over them. Take the fifth flower and adhere to the left side of the Petal Pink piece. Now use your Crisp Cantaloupe ink and stamp the “happy birthday” from the Scalloped Blooms stamp set on the right side of the Petal Pink piece. Now adhere this to the white piece measuring 4 1/8” x 5 3/8” and then adhere to the front of your card base.

For the inside of your card, adhere the white piece to the back panel. Use your Crisp Cantaloupe ink to stamp the same daisy flower in the lower left corner and the “wishing you a day of relaxation, happiness and lover greeting in the upper center.

What a bright and cheery birthday card for any friend of family member.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Waterside Retreat Oceanside Items Card

May 24, 2026 No Comments

This birthday card is a great card for any man in your life. It is made with the Waterside Retreat designer series paper and Relaxing Waterside stamps and dies from Stampin’ Up. The adorable anchor trinkets that go with this set add a great addition.

To create this card, you just need a few things:

Pool Party card stock (Stampin’ Up)
White card stock
Waterside Retreat designer series paper (2026 Annual Catalog Stampin’ Up)
Relaxing Waterside stamp set and dies (2026 Annual Catalog Stampin’ Up)
Pool Party ink (Stampin’ Up)
Crumb Cake ink (Stampin’ Up)
Loose Anchor Trinkets (2026 Annual Catalog Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

From a piece of Pool Party card stock cut a card base to 5 ½” x 8 ½” and fold in half. Take a piece of white card stock and cut a piece for the inside of your card to 4” x 5 ¼” and adhere to the inside of your card. Then take your Waterside Retreat designer series paper and find the bool party striped piece and cut a piece to 4” x 5 ¼” for the front of your card. Adhere this piece to the front of your card.

Also in the Waterside Retreat designer series paper pack find the piece with the cutout, the buoys and the life jackets and paddles. From the cutouts piece cut out the Pool Party colored shell piece. Then on the buoys page cut out two buoys in colors of your choice to patch your papers. And from the life jacket and paddles page cut out a life jacket that matches your paper and then cut out one of the double paddles.

Adhere the shell cut out piece to the front center of your card. Adhere the paddles to the right side of the shell and then the life jacket over the paddles raised with pop dots. On the right side adhere to the buoys together with raised up with pop dots. Then take one of the anchor trinkets and adhere in the upper left corner over the buoys.

Take a scrap piece of white card stock and stamp the “today is your day” greeting in pool party ink, then trim down and cut the end to form a flag. Then stamp the seagull in Crumb Cake ink and cut out with the die. Adhere to flag label to the top of your shell cut out and then adhere the seagull on the left end.

For the inside of your card stamp the “have a great birthday” greeting in Pool Party ink in the upper center. Then with the Crumb Cake ink stamp the flying seagull in the upper right corner and the larger grass in the lower left corner.

What a great birthday card for any guy in your life.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Waterside Retreat Fish Birthday Stepper Card

May 18, 2026 No Comments

The Waterside Retreat designer series paper contains some great masculine paper, including this fish and wave paper that make up this great card. Then you add in the anchor embellishment also from Stampin’ Up and what an adorable stepper card.

To create this card, you just need a few things:

Misty Moonlight card stock (Stampin’ Up)
White card stock
Waterside Retreat designer series paper (2026 Annual Catalog Stampin’ Up)
Relaxing Waterside stamp set and dies (2026 Annual Catalog Stampin’ Up)
Cloud Cover ink (2025-2027 In Color Stampin’ Up)
Loose Anchor Trinkets (2026 Annual Catalog Stampin’ Up)
Paper trimmer
Adhesive of choice

For this stepper card, cut a card base from Misty Moonlight card stock to 4 ¼” x 11” and score at 3 ½”, 7” and 9”. Cut another piece to 2 ¾” x 4”. From white card stock cut a 4” x 5 ¼” piece, one to 3 ¼ x 4” for the back of your card, one to 2 ½” x 3 ¾” and one to 1 ¾” x 4”. Now take your Waterside Retreat designer series paper pack and find the wave paper and the fish paper. From the wave paper cut a piece to 3 ¾” x 5” and another to ½” x 3 ¾”. Then from the fish paper cut a piece to 2 ¼” x 3 ½”, making sure you are capturing your fish the way you want.

Fold you card base into an “M” shape with the larger section to the back. Take the white pieces measuring 4” x 5 ¼” and adhere the wave piece that is 3 ¾” x 5” and then adhere it to the front of the larger section of your card base leaving 1/8” on all three sides. Now adhere the small wave piece to the small white piece and adhere that to the front of the small section.

Now take the other piece of Misty Moonlight and adhere to white piece measure 2 ½” x 3 ¾” to it and then the fish piece to the front of the white portion. Now adhere this over you wave paper on the small section centered among both sections. Take the “have a great birthday” greeting stamp from the Relaxing Waterside stamp set and stamp on white card stock in Cloud Cover ink Cut out to a rectangle and cut out a “v” section at the right end to form a flag label. Add a wave into your flag and adhere the left and right sides at the bottom of your fish paper. Then adhere your anchor embellishment to the left side of your label.

For the back of your card adhere the 3 ¼” x 4” white piece to the back of your card on the Misty Moonlight section. Use the “today is your day” stamp from the Relaxing Waterside stamp set and stamp in Cloud Cover ink in the upper center.

Great birthday card for the men in your life.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Natures Symphony To a Great Buy Birthday Card

May 16, 2026 No Comments

This masculine birthday card made from Nature’s Symphony stamps and dies from Stampin’ Up and the Delicate Dreams designer series paper. I also used the Exposed Brick 3D Embossing Folder to give the background great depth.

To create this card, you just need a few things:

Mossy Meadow card stock (Stampin’ Up)
Crumb Cake White Core card stock (Stampin’ Up)
Copper Clay card stock (Retired Stampin’ Up)
Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
Nature’s Symphony stamp set and dies (March 2026 Online Exclusive Stampin’ Up)
Birthday Greetings stamp set (retired Stampin’ Up)
Copper Clay ink (Stampin’ Up)
Natural Matte Dots (March 2026 Online Exclusive Stampin’ Up)
Exposed Brick 3D embossing folder (retired Stampin’ Up)
Sanding block
Paper trimmer
Adhesive of choice

From the Mossy Meadow card stock cut a card base to 5 ½” x 8 ½” and fold in half. From the Crumb Cake white core card stock cut two pieces to 4” x 5 ¼” and another to 5/8” x 2”. From Copper Clay use the wood die from Nature’s Symphony to cut out. From a piece of the varied Mossy Meadow designers series paper from the Delicate Dreams pack cut leaves using the large leaf die and one of the small leaves.

Take one of the Crumb Cake white core pieces you cut and using the light side emboss with the Exposed Brick 3D embossing folder and use your sanding block to expose some of the white and make your brinks stand out. Adhere to the front of your Mossy Meadow card base.

Adhere the large leaf pieces toward the upper section of your card front. Adhere the wood piece you cut out to the bottom of the leaf piece. Take the label piece of the Crumb Cake white core paper you cut and with Copper Clay ink stamp the “to a great guy” greeting. Use the sanding block to expose some white on your label, then adhere to the top your wood piece. Adhere three of the Mossy Meadow Natural Matte Dots in the smaller size around the front of your card.

For the inside, adhere the other piece of Crumb Cake white core card stock to the inside back panel. Use your sanding block to expose some of the white. Adhere the small leave in the lower left corner and in Copper Clay ink stamp the “happy birthday” greeting from the Birthday Greeting stamp set.

What a nice masculine card for any guy you knows birthday.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Beautiful Gallery Double Vision Celebrate Card

May 11, 2026 No Comments

What a great masculine card with the double vision card design. It is made with the Beautiful Gallery designer series paper and the Beautiful Motifs stamps and dies from Stampin’ Up. My friend and upline did this on a Facebook Live going vertical instead of this horizontal at her My Stampin’ Style page.

To create this card, you just need a few things:

Mossy Meadow card stock (Stampin’ Up)
Beautiful Gallery designer series paper (retired Stampin’ Up)
Beautiful Motifs stamp set and dies (retired Stampin’ Up)
“Happy Birthday to You” stamp (retired Stampin’ Up)
Mossy Meadow ink (Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

I have designed this to the pieces are all the same size, most of them are two different sizes depending on if up or down piece. For your card base cut a piece of Mossy Meadow to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”. From the Beautiful Gallery find three pieces of the cottage paper, or one piece and you can use Basic Beige for the other two pieces. Cut two pieces of the back of the cottage paper to 4” x 5 ¼” and one for a label to ½” x 2”. Cut the cottage piece out to 3 ¾” x 5”, getting the part you want for your card front. Then cut that into five 1” strips, or you can do ten ½” strips if you prefer to make them smaller.

Take one of the tan pieces and adhere to the front of your card base. Use pop dots to adhere your first strip to the front of that leaving about 1/8” to the left, adhere the next one directly to the paper and keep going with every other so you have three up on pop dots (if you choose to use the ½” strips your starter will end up popped up and the last one down, if you do the 5 then both ends will be popped up). With some Mossy Meadow ink and the “celebrate” greeting stamp on your label strip you cut out. Adhere that to the lower left corner adhering to two of the raised pieces, so watch where you put your adhesive as it won’t need it in the middle.

For the inside take your other tan piece and use the leaf die from your Beautiful Motif dies to cut in the lower left corner, which cuts a leaf pattern, but doesn’t cut the whole thing. Adhere to the inside back of your card base. Use the Mossy Meadow ink to stamp the “Happy birthday to you!” greeting (an old Stampin’ Up stamp but I don’t know the set name).

What a great masculine birthday card in the double vision design.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Let’s Celebrate Birthday Card

April 29, 2026 No Comments

I love this Everyday Happiness paper from Stampin’ Up but I have a hard time designing some cards with it, but I thought this one turned out cute. It was influenced by the Happy Day banner dies that I got in the 2025 Spellbinders Advent.

To create this card, you just need a few things:

White card stock
Everyday Happiness designer series paper (Retired Stampin’ Up)
Simply Sketched stamp set (Retired Stampin’ Up)
Sentimental Park stamp set (Retired Stampin’ Up)
Label layered dies – not sure from what set (Retired Stampin’ Up)
Banners Spellbinder S1-168 W9 (2025 Advent Calendar Spellbinder)
Lost Lagoon ink (Stampin’ Up)
Bakers Twine Essentials Pack (Stampin’ Up)
Opaque Faceted Gems (Retired Stampin’ Up)
Paper trimmer
Adhesive of choice

With a piece of white card stock cut a card base to 5 1/2” x 11” an then angle the top from the 5 ½” to 3 3/8”. Then score at 4 ¼” and 7 5/8” starting from the high end as you want the high back panel to be full size and the other two panels will be skinnier. Folding from the higher back panel with the high side on the right, fold the middle panel up and the front panel back to form a z-fold.

Get your Everyday Happiness designer series paper pack and find the floral paper, the gold with the stars, the blue to gold variegated and the blue checked papers. Use the blue checked paper for the back panel, cutting to 4” x 5 ¼” and angling to the left to 4 3/8”. Use the blue gradient paper for the inside middle panel, cutting to 3 1/8” x 4 ¼” and angle to the left to 3 ½”. For the front back panel use the gold star paper and cut to 3 1/8” x 4 ¼” and angle to the right to 3 ½”. Then for the front panel use the floral paper cut to 3 1/8” x 3 ½” and angle to 2 7/8”. Finally cut a panel from white card stock to 3 1/8” x 4 ¼” and angle to the right to 3 ½”.

Adhere each to their perspective panels and then adhere to white piece to the back panel onto the blue checked paper so it is hiding under the other panels when folded, same as the inside middle panel but going the opposite direction. Cut out two of the flowers from a scrap piece of the floral paper and two of the grey leaves and adhere those to the bottom left of the white inside panel. Use the “Happy Birthday Wishes” greeting stamp from the Simply Sketched stamp set in Lost Lagoon ink and stamp to the upper portion of that inside white panel.

Take some of the gold star paper and your Happy Day Banner Dies and cut out the Happy Day banner and then from white card stock cut out the two solid banner dies. Adhere the white banners to the back of the Happy Day banners. Cut your Happy Day banner into to and adhere across your inside middle panel with happy going across the top and day coming from the left meeting up with the bottom of the “a” banner.

For the front panel stamp the “let’s celebrate” greeting from Sentimental Park in Lost Lagoon ink onto white card stock and then use a layered label die (not sure what set these are from) and the bottom layer can be cut from the gold star paper. Adhere your labels together and adhere to the front of your card overhanging across some of your showing blue checked paper. Add a few embellishment gems for decoration and a bow tied from the Bakers Twine Essentials pack in the grey color to match the leaves in the floral paper.

What a great birthday card for anyone you know

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Floral Delight Happy Birthday Card

April 27, 2026 No Comments

I saw a card like this and hadn’t saw this style in a while so thought I would make one. I used the Floral Delight designer series paper and Delightful Wishes stamps and dies from Stampin’ Up to make this one.

To create this card, you just need a few things:

Old Olive card stock (Stampin’ Up)
Pecan Pie card stock (Stampin’ Up)
Daffodil Delight (Stampin’ Up)
White card stock
Floral Delight designer series paper (retired Stampin’ Up)
Delightful Wishes stamp set and dies (retired Stampin’ Up)
Lemon Lolly ink (Stampin’ Up)
Paper trimmer
Adhesive of choice

To start your card base, cut a piece of Old Olive to 4 ¼” x 5 ½”. From white card stock cut a piece to 5 ¼” x 6” and fold in half to 3” x 5 ¼” and another piece to 1” x 5 ¼”. Take your Floral Delight designer series paper find the yellow gingham paper and cut a piece to 2 7/8” x 5 1/8” and the yellow floral with the branches to 7/8” x 5 1/8”.

Take the white folded piece and adhere to the left side of the Old Olive card base, opening from the right. Adhere the yellow gingham piece to the front of it. Adhere your 1” white piece to the right side of your Old Olive card base and adhere the floral strip to it.

From a scrap piece of old olive use the larger wishing die to cut out. From Daffodil Delight cut out the smaller wishing, adhere them together. Tip, use adhesive sheets to back your Daffodil Delight card stock piece before you cut it out, but not your Old Olive piece as some of that won’t have adhesive because it hangs over the edge. From a scrap piece of white card stock stamp the multi-flower stamp base in Lemon Lolly and then the top layer in Daffodil Delight and cut out with the die. Use Pecan Pie card stock and the stick die to cut out. Stamp two of the double leaves, cut out with the dies and then cut them into individuals so you have four leaves. Adhere your leaves and flower pieces randomly to your stem and then adhere your stem to the front left side of your card front toward the top. Then on a scrap piece of white stamp the “you a happy birthday” in Old Olive ink and use the long slim die to cut it out. Adhere that at the bottom of your card centered on the full card, so hanging over the edge of the card opening slightly and then adhere your “wishing” above that, again with part of your “g” hanging over.

For the inside is used an old block stamp greeting saying ”I can’t think of a nicer person to celebrate!” in Old Olive ink, I don’t know what stamp set it was from.

What a bright and cheery birthday card for someone you care about.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Diagonal Delicate Dreams Birthday Card

April 21, 2026 No Comments

For a different twist I did a diagonal card with the Delicate Dreams designer series paper using the new 2026-2028 In Color Hydrangea Hue from Stampin’ Up for the card base and my flower.

To create this card, you just need a few things:

Hydrangea Hue card stock (2026-2028 In Color Stampin’ Up)
Crumb Cake card stock (Stampin’ Up)
White card stock
Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
Delicate Whispers stamp set and dies (March 2026 Online Exclusive Stampin’ Up)
12 Days of Crafting Advent Calendar stamp set and dies (2026 Advent Calendar Stampin’ Up)
3” circle die (Stampin’ Up)
Natural Matte Dots embellishments (March 2026 Online Exclusive Stampin’ Up)
Hydrangea Hue ink (2026-2028 In Color Stampin’ Up)
Secret Sea ink (2025-2027 In Color Stampin’ Up)
Scoring board or scoring blade for paper trimmer
Paper trimmer
Adhesive of choice

For you card base take a piece of Hydrangea Hue card stock and cut it on the diagonal in half from the top left to the lower right. Then score on the 11” side at 5 ½” and on the 8 ½” side at 4 ¼”. Fold the 4 ¼” side in and the 5 ½” down to form you card base. From Crumb Cake cut a piece to 4” x 5 ¼” and cut in half on the diagonal and adhere to each side. Then with the floral piece from the Delicate Dreams designer series paper pack cut to 3 ¾” x 5” and cut on the diagonal and adhere to your Crumb Cake pieces.

With a white piece of card stock cut out a 3” circle with a die. To the lower right side use the “for someone extra special” greeting from the 12 Days of Crafting stamp set and stamp in Secret Sea ink. On a scrap piece of white card stock use the large flower stamp from the 12 Days of Crafting stamp set and stamp in Hydrangea Hue ink, use the die to cut it out. Then use Secret Sea ink to stamp the flower center. Use the leaf spray die and the Mossy Meadow paper from the Delicate Dreams designer series paper to cut out.

Adhere the leaf spray to the left and upper part of your circle and then the flower to the left side of your words. Add a few of the Natural Matte Dots embellishments to the white spaces of your circle. Put adhesive to the upper left side of the back of your circle and adhere to the upper center of your card front, adhering only to the upper diagonal.

For the inside of your card cut a piece of Crumb Cake card stock to 4” x 5 ¼” and a piece of white cards stock to 3 ¾” x 5”. Adhere the white piece to the Crumb Cake and then adhere to the inside back of your card base. Use Secret Sea ink to stamp the “Birthday wishes” greeting to the upper center of the white piece from the 12 Days of Crafting Advent Calendar stamp set.

A really pretty card for anyone’s birthday.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Painted Illusions Happiest of Birthday Card

April 18, 2026 No Comments

This simple, quick and easy card is made with Painted Illusions designer series paper from Stampin’ Up and is just so cute. It’s bright colors just make you smile. It has greetings from the Happiest of Birthdays stamp set.

To create this card, you just need a few things:

Darling Ducking card stock (2025-2027 In Color Stampin’ Up)
White card stock
Painted Illusions designer series paper (February 2026 Product of the Month Stampin’ Up)
Happiest of Birthdays stamp set (retired Stampin’ Up)
Darling Duckling ink (2025-2027 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice

From a piece of Darling Duckling card stock cut the following:

5 1/5” x 8 ½” and fold in half for your card base
2 7/8” x 3 5/8” for the front label
1 5/8” x 3 3/8” for inside label

From white card stock cut the following:

4 1/8” x 5 3/8” for front
4” x 5 ¼” for inside
2 ¾” x 3 1/2” for the front label
1 ½” x 3 ¼” for the inside label

Take your Painted Illusions designer series paper pack and find the piece with the colorful waves and use a section that contains some of the Darling Ducking. Cut the piece to 4” x 5 ¼”.

Adhere the piece of white measuring 4 1/8” x 5 3/8” and then the piece of wave paper to the front of that. Take the piece of white cut to 2 ¾” x 3 ½” and stamp the “wishing you the happiest of birthdays” greeting in Darling Duckling ink. Adhere this to the piece of Darling Ducking measuring 2 7/8” x 3 5/8”. Now adhere this to the front of your card in the center.

For the inside of your card adhere the 4” x 5 ¼” to the inside back of your card. Take the white label and stamp the “it’s your day enjoy it!” in Darling Duckling ink. Adhere to the yellow label and then adhere to the inside of your card in the upper center.

What an easy, quick card for whenever you need a birthday card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

True Blue Happy Birthday Card

April 16, 2026 No Comments

This is a great generic birthday card for anyone, made with True Blue designer series paper from Stampin’ Up and the leaf die from Nature’s Symphony dies.

To create this card, you just need a few things:

Night of Navy card stock (Stampin’ Up)
Balmy Blue card stock (Stampin’ Up)
White card stock
True Blue Floral designer series paper (December 2025 Product of the Month Stampin’ Up)
Nature’s Symphony dies (March 2026 Online Exclusive Stampin’ Up)
Fabulous Sayings stamps (January Product of the Month Stampin’ Up)
Happiest of Birthdays stamps (retired Stampin’ Up)
Night of Navy ink (Stampin’ Up)
Paper trimmer
Adhesive of choice

From a piece of Night of Navy card stock cut a card base to 5 ½” x 8 ½” and fold in half. With white card stock cut a piece to 3 5/8” x 3 7/8”, one to 3 7/8” x 5 1/8” and a third to 1 1/8” x 3 ¾”. Take a piece of Balmy Blue and cut to 1 ¼” x 3 7/8”. Then from the True Blue Floral designer series paper and find the Balmy Blue piece with the white leaves and Night of Navy sprigs and cut a piece to 3 ½” x 3 ¾”.

Adhere the Balmy Blue with leaves and sprigs to the white piece measuring 3 5/8” x 3 7/8” and adhere that to the top portion of your card base leaving about ¼” around the three outer sides. Adhere the white strip to the Balmy Blue strip.

Take the “happy birthday” greeting stamp from the Fabulous Sayings stamp set and stamp in Night of Navy ink on the white label. Use a scrap piece of white card stock and the large leaf sprig from Nature’s Symphony dies and cut out. Adhere to the front of the Balmy Blue with leaves and sprigs on the front of your card.

For the inside of the card adhere the white piece to the back panel. Take a scrap piece of Balmy Blue and the large leaf die and cut out a few leaves and adhere in each of the lower corners. From the Happiest of Birthdays stamp set take the “It’s your day! Enjoy it” greeting and stamp in Night of Navy ink in the upper portion of the inside of your card.

What a great birthday card for any special person you know.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.