Cards, Papercrafting

Painterly Pears Golden Pears Thank You Card

No Comments

This lovely Painterly Pears thank you card is just so lovely with the glittery colored pears to make them shine.  It uses the Painterly Pears suite from Stampin’ Up.

To create this card, you just need a few things:

  • Mossy Meadow card stock (Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Painterly Pears designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Perfectly Pears stamp set (July 2025 Online Exclusive Stampin’ Up)
  • Traditional Label Dies (August 2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow and Gold Trim Ribbon (July 2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Wink of Stella Glitter Brush (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

With a piece of Mossy Meadow card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  For the inside of your card cut a piece of Basic Beige card stock to 4” x 5 ¼”.  Then from your Painterly Pears designer series paper pack find the Basic Beige piece with the golden pears and cut a piece to 4” x 5 ¼” and then also fussy cut out one pear to decorate the inside of your card.  Take your piece of pear paper and color each of the pears with your Wink of Stella glitter pen to give them a nice shine. 

From the Mossy Meadow and Gold Trim ribbon cut a piece to 4” and another to 7 ½”.  Take the 4” piece and fold in half and adhere both ends about ½” apart about 1 “ up from the bottom of the paper.  Then feed the other piece through and fold in half as well have adhere to the back on the other side about ½” apart and up 1” from the bottom of your paper.  Then adhere this to the front of your card base. 

From a scrap piece of Basic Beige cut one of the oval shape smaller labels from the Traditional Label die set and then stamp a “Thank You” greeting from the Perfectly Pears stamp set.  Then cut the next size up from a scrap piece of Mossy meadow and adhere together.  Use pop dot and adhere your label over the ribbon to the right side on the front for your card. 

For the inside of your card adhere your Basic Beige piece.  From the Paper Tags stamp set find the “You are so very kind” stamp and stamp on the inside upper center in Mossy Meadow ink.  Adhere your cut out pear to the lower left corner and color your pear with some Wink of Stella for a bit of a shimmer. 

This glittery pear card is perfect to tell someone thank you for being so kind.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Paper Tags Sunshine and Laughter Card

No Comments

The Paper Tags stamps and dies from Stampin’ Up are so cute and I have been wanting to use them.  This tag just screamed bright and cheery paper, which is not my standard but was so fitting.  I used some things for this card that I don’t know the name of so I can’t tell you information on everything I used for this card, sorry about that.

To create this card, you just need a few things:

  • Crushed Curry card stock (Stampin’ Up)
  • Flirty Flamingo card stock (Stampin’ Up)
  • White card stock
  • Unknown? designer series paper (retired Stampin’ Up)
  • Paper Tags stamp set and dies (August 2025 Online Exclusive Stampin’ Up)
  • Small flower die (unknown)
  • Flirty Flamingo ink (Stampin’ Up)
  • Faux Glass Dots embellishments (retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From the Crushed Curry card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  With your Flirty Flamingo card stock cut to pieces to 4 1/8” x 5 3/8”.  Then with the white card stock cut a pieces to 4” x 5 ¼”.  With your bright colored designer series paper cut a piece to 4” x 5 ¼”. 

Take your Crushed Curry card base and adhere one of the pieces of Flirty Flaming to the front of the card and then adhere the bright designer series piece to the front of that. 

From a scrap piece of Crushed Curry card stock use the larger scallop-edged die to cut out a tag base.  Take your Paper Tag stamp set and find the “May your day be filled with sunshine and laughter” stamp and stamp on a piece of white card stock with Flirty Flamingo ink.  You will want to be sure your stamp is inked well to get good coverage.  Use the other larger tag die and cut out your tag.  Adhere your stamped white tag to your Crushed Curry tag base, then use pop dots to adhere to the front of your card, centered by on an angle.  From some scrap Flirty Flamingo card stock use a small flower die to cut out six flowers, roll the edges of your flowers and then adhere them together two-by-two to make three double layered flowers.  Use the Crushed Curry embellishments from the Faux Glass Dots pack as centers for your flowers.  Adhere two of the flowers to the left of your tag on the front of your card and the other one to the upper right of your tag. 

For the inside of your card adhere the piece of Flirty Flamingo and then the white piece to that.  With the Paper Tags stamps set find the “It’s a wonderful day to celebrate you” stamp and stamp it for your inside greeting in Flirty Flamingo ink.

This is such a cute card to brighten anybody’s day.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Happiness Enclosed Embossed Sunflower Card

No Comments

This is a great fall card made with the lovely Sunflower 3D embossing folder from Stampin’ Up.  It was inked on the side that embosses in which then inked the background and some of the highlights, making your sunflowers stand out. 

To create this card, you just need a few things:

  • More Mustard card stock (retired Stampin’ Up)
  • Really Rust card stock (retired Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Paper Tags stamp set and dies (Stampin’ Up)
  • More Mustard ink (retired Stampin’ Up)
  • Natural Tones Linen Thread (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

For the card base cut a piece of Really Rust card stock to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  With the More Mustard card stock cut a piece to 4” x 6 ¼”.  Then from Basic Beige cut a piece for the inside to 4” x 5 ¼”. 

Grab your Sunflower 3D Embossing Folder and the More Mustard ink pad and in on the side where the flowers dent in.  I started by running it down from top to bottom and then actually dabbed the ink.  Then place your piece of More Mustard cut paper on the uninked side where you want it placed and fold the inked side in.  Run through your die cut machine.  Let dry for a few minutes then cut a 1” strip off of one end to measure 1” x 4”. 

Adhere the 4” x 5 ¼” embossed piece to the front of your card.  Take a scrap piece of More Mustard and stamp with the “Happiness Enclosed” in more mustard ink.  Cut the ribbon label die to cut out.  Take some of the Cajan Craze linen thread and wrap 5 times and then cut a piece to tie it all together and snip the ends.  Adhere to the back of the label and then adhere to the lower right corner. 

For the inside of the card adhere the Basic Beige piece to the inside and then adhere the piece of embossed More Mustard piece you cut to 1” to the bottom just slightly up from the bottom leaving about 1/8” of an inch.  With the “consider this a paper hug” stamp it in the upper center of the inside of your card in More Mustard ink. 

This card just speaks cheer with the lovely sunflowers and sending a “paper hug.”

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Painterly Pear Pink Hello Card

No Comments

This card turned out really cute with the pink Painterly Pear designer series paper from Stampin’ Up.  It is just so bright and cheery with the petal pink background and I just love the colors.

To create this card, you just need a few things:

  • Mossy Meadow card stock (Stampin’ Up)
  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Painterly Pears designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Perfectly Pears stamp set and dies (July 2025 Online Exclusive Stampin’ Up)
  • Paper Tags stamp set (2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Old Olive ink (Stampin’ Up)
  • Darling Duckling ink (2025-2027 In Colors Stampin’ Up)
  • Soft Suede ink (retired Stampin; Up)
  • Mossy Meadow Stampin’ Blends (Stampin’ Up)
  • Petal Pink Stampin’ Blends (Stampin’ Up)
  • Low-Profile Sparkle Dots (July 2025 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

With your Mossy Meadow card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut another piece to 2 5/8” x 4”.  From your Petal Pink card stock cut a piece to 2 ½” x 4” and another for the inside to 4 1/8” x 5 3/8”.  Then from the pink piece of paper from the designer series paper from the Painterly Pears designer series paper pack cut a piece to 4” x 5 ¼”.  Cut a piece of white card stock for the inside to 4” x 5 ¼”. 

With the Perfectly Pears large pear outline stamp and the Mossy Meadow ink stamp two pears on some white card stock.  Then take the large pear inside stamp and first stamp in Old Olive ink and then again in Darling Duckling ink a little off-set so it shows along the edges.  Then stamp two of the stem and leaves in Mossy Meadow.  Use the dies to cut them out.  Then with your Petal Pink Stampin’ Blends add a little pink coloring to the pears.  From a piece of Darling Duckling card stock and Darling Duckling ink stamp one of the three flowers.  Then with the Soft Suede ink and the flower centers stamp them.  Use the die to cut out the flowers and also one of the hash pieces.  With a scrap piece of white card stock and the Mossy Meadow ink stamp Hello and use the small label die to cut out. 

Now let’s build your card.  Start with your Mossy Meadow card base and adhere the Pink Pear designer series paper to the front.  Then adhere the Mossy Meadow 2 5/8” x 4” piece in the center and adhere the pink 2 ½” x 4” piece onto that.  Take the Darling Duckling hash piece and adhere down about ½” from the top.  Then adhere your pear on the right along with the stem and leaves and then adhere the second pear to the left with stem and leaves using pop dots.  Use pop dots to adhere your flowers in the lower right corner.  With pop dots adhere your hello over the Darling Duckling hash.  Then with the Low-Profile Sparkle Dots decorate around in the Mossy Meadow dots. 

For the inside of your card adhere your Petal Pink piece to the inside of your card and then the white inside piece to it.  From the Paper Tags stamp set and your Mossy Meadow ink, find the “it’s a wonderful day to celebrate you” greeting stamp and stamp on the inside upper center.

This card turned out so pretty and I love the Paper Tags stamp on the inside.  It is just a great card to say hello to a friend you haven’t talked to in a bit.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading