Stampin Up – Welcome

Mixed Media Floral Z-Fold Card

March 11, 2025 No Comments

This cheery floral z-fold card made with Mixed Media Floral designer series paper from Stampin’ Up was so easy and quick to make.

To create this card, you just need a few things:

Daffodil Delight card stock
White card stock
Mixed Media Floral designer series paper
Mixed Florals stamps and dies
Mixed Labels stamps and dies
Basic Black ink
Calypso Coral Dark Stampin’ Blends ben
Scissors
Scoring board or scoring blade for paper trimmer
Paper trimmer
Adhesive of choice

Take the Daffodil Delight card stock and cut to 5 ½” x 11” and score at 3 3/8” and 6 ¾” and fold. With the white card stock cut two pieces 3 1/8” x 5 ¼” and one to 4” x 5 ¼”. From the Mixed Media Floral designer series paper pack, find the piece with the mixed florals of yellow cone flowers and peach tulips. Hand cut around the flowers with the even portion on the right side and up to the large cone flower on the right side. Then cut another portion of the two cone flowers from the rest of the left side to use in the middle section.

Note: The other easier option if you don’t care about the additional flowers on the middle panel is to not cut the white cardstock, but to just cut your Mixed Media Floral designer series paper to the three sizes of the white card stock and then you don’t have to the cutting out of the flowers. The other just ads a bit more dimension and I wanted the additional flowers in the middle section.

Take the first 3 1/8” piece of white card stock and line up the right side of the floral paper you cut out to line the right and bottom, and cut to size. Take the second 3 1/8” piece of white card stock and cut the next section of the floral paper to match for the lower portion and use the piece of two cone flowers you cut separate to the right and line up to look like they go together. Then take the 4” x 5 ¼” piece of white card stock and line up and cut the last section of the floral paper to match. Adhere all pieces to the white portions and adhere to the Daffodil Delight card base.

With the Mixed Florals stamp set, stamp two ladybugs with the Basic Black ink, color them in with the Dark Calypso Coral Stampin’ Blends pen. Die cut out each of the ladybugs and adhere one to the white portion of the middle panel and the other to the upper right side of the back panel. With the Mixed Labels stamp set and the Basic Black ink, stamp the small “Thank You” and cut out with the small label die and then cut out the next size up label die in Daffadil Delight and adhere together and to the upper left corner of the back panel of the card.

That is all it takes to make this cute card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Everyday Happiness Double Concertina Interlocking Card

March 9, 2025 No Comments

I just love this card, the front is pretty as a card all on it own, but then you open it up and the real card is on the inside. It is also made with the Everyday Happiness designer series paper from Stampin’ Up which I am infatuated with right now, it is just so beautiful. This card is a full-size card at 5” x 7” but could be done as a 4 ¼” x 5 ½” card as well. I made this for a good friend’s 50^th so wanted the larger size.

To create this card, you just need a few things:

Everyday Happiness designer series paper
Wild Wheat card stock
White card stock
Wild Wheat ink
With You in Mind stamp set
Nested rectangle dies, one about 3” x 4 ¼” and the next size down
Banner die
Number dies
Scoring board or scoring blade for paper trimmer
Paper trimmer
Adhesive of choice
Scissors
Pop-Dots

This card is not hard to make but it has a lot of cutting for the different layers of paper. Since this is a full-size card, it takes a bit more paper. With White card stock, cut the following:

One piece to 7” x 10 ½” scored on the long edge at 5” and 10”
One to 7” x 10” scored on the long edge at 5”
One to 3 ¾” x 9 ¾” scored at 4 7/8”
Two pieces to 2 ½” x 3 ¾” each scored at ½” and 2”

With the Wild Wheat card stock cut two pieces to 2 ¾” x 4 1/8” and one to 3 ¼” x 4 ½”.

Grab your Everyday Happiness designer series paper. Take a piece with the swoops of blue, gold and white. Cut three pieces to 4 ¾” x 6 ¾”. With the floral piece cut two pieces to 4 ¾” x 6 ¾” and one to 4 ½” x 6 ½”. With the blue plaid paper cut two pieces to 3 ½” x 4 ¾” and two pieces to 1 ¼” x 3 ½”.

With the White card stock pieces cut to 7” x 10 ½” and the 7” x 10 pieces, fold both pieces at the 5” score mark and with the fold pointing down fold the ½” mark down as well. Then adhere the second piece of card stock, also with the fold pointing down to the ½” piece, forming a “W” shape.

Take the two pieces of the swoops designer series paper that you cut to 4 ¾” x 6 ¾” and the largest of the two nested rectangle dies and cut the rectangle out of the center of both. Adhere these to the two center pieces of your base White card stock. Take the smaller rectangle die and place the die in the center of your swoops cut out and cut out the smaller rectangle. Keep all of these cut out pieces to use later. Now take the two floral pieces you cut to 4 ¾” x 6 ¾” and adhere on the front and back panel of the inside of your card.

Let’s start making the interlocking piece. Take the piece of white card stock cut to 3 ¾” x 9 ¾” and fold in half. Then take the two pieces of white card stock cut to 2 ½” x 3 ¾” and fold each into a “U” shape. Adhere one side of the “U” to the back of the 3 ¾” x 9” ¾” piece and the other to the other end, both each with the “U” facing to the center. Take the four pieces of blue plaid you cut earlier and adhere the two small pieces to the ends and the two larger pieces to the center panels.

Take the two White card stock rectangle pieces you cut from the card center cut-outs and the two Wild Wheat pieces you cut to 2 ¾” x 4 1/8” and adhere the White to the Wild Wheat. With a scrap piece of the blue with polka dots cut cut 5 banner pieces and use four of them to adhere to the tops of the two pieces in whatever arrangement you like. With the While Wheat ink and the With You In Mind stamp set, stamp the “Happy Birthday” after stamping off first.

Use a number stamp set or dies to add the age if desired to the second. Adhere each piece to the front center panels.

Now take that and put through the center of the card base and fold to align the center piece in the center and to the back. Open the front panel trying to keep the rest aligned and put adhesive on the ½” strip then lay flat and fold the front of the card onto it to align. Do the same for the back.

Now for the front of the card, take the last swooped paper and the last floral piece and adhere together and then to the front of the card. Then the piece of Wild Wheat and one of the cut-outs of the swooped paper. Stamp a greeting in the center of the swooped paper. Cut out a few of the flowers and leaves and adhere to the upper left corner and lower right corner and use the last banner you cut to put in the upper right corner.

There is your Everyday Happiness double concertina interlocking happy birthday card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Memorable Blooms Window Card

March 5, 2025 No Comments

Using Blackberry Bliss and this lovely Bloom Impressions designer series paper from the 2025 Sale-a-bration make a rich and elegant card.

To create this card, you just need a few things:

Blackberry Bliss card stock
White card stock
Bloom Impressions designer series paper from 2025 Sale-a-bration
Memorable Blooms stamp set and dies
Blackberry Bliss ink
Paper trimmer
Adhesive of choice

Take your piece of Blackberry Bliss card stock and cut your card base to 5 ½” x 8 ½” and fold in half to measure 4 ¼” x 5 ½”. Also cut a piece to ¾” x 4”. Find the blackberry floral piece in the Bloom Impressions designer series paper pack from the 2025 Sale-a-bration pack. Cut two pieces to 4” x 5 ¼” and one piece to 3 ¾” x 5” and another to ½” x 4”. Take on of the 4” x 5 ¼” pieces using the plain non-floral side and the 3 ¾” x 5” piece with the floral side. Adhere the floral piece to the plain piece and then the plain piece to the front of your card base, but only putting adhesive along the outer edges so that you can use the cut out pieces from the window.

Take your outer octagon die and cut out your windows toward the top of your card front. Now take the blackberry bliss piece from your window cut out and cut out the floral die cut from the center of it. Now take the plain purple piece from the window cut out and adhere it to the back of the floral cut out. Grab the white piece of card stock you cut for the inside and adhere it on the inside. Put adhesive on the back of the floral piece, close your card front and adhere the floral piece into the windows so it is lined up when you open the card.

With your Blackberry Bliss ink and the two strips of white and purple, find the “you mean the world to me” stamp from the Memorable Blooms stamp set and stamp it onto the white strip. Adhere the white strip to the purple strip and adhere the purple strip centered at the bottom of your card front.

That is all it takes to make this elegant window card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Thoughtful Journey Hot Air Balloon Card

March 4, 2025 No Comments

This easy card was fun to make and was so quick. My friend gave me the Spellbinders Advent Christmas set for Christmas, and it was so much fun. I got to open a spot every day and it had dies, stencils, embellishments and stamps. This hot air balloon die set was one of the first days I got so wanted to get to use it. Then using it with some of the beautiful paper from Stampin’ Ups Thoughtful Journey designer series paper pack was just a perfect combination.

To create this card, you just need a few things:

Fresh Freesia card stock
Petunia Pop card stock
White card stock
Thoughtful Journey designer series paper from Stampin’ Up
Hot Air Balloon dies from Spellbinders
Fresh Freesia ink
Thin twine
Paper trimmer
Corner Rounder
Adhesive of choice
Pop-Dots

Take your Fresh Freesia card stock and cut a piece to 5 ½ x 8 ½” and fold in half to 4 ¼” x 5 1/2” for your card base. If you have a corner rounder that will cut through two layers then round the corners, if you don’t then you can skip that step through out the instructions. Find a piece of designer series paper from the Thoughtful Journey pack that has some good sky for your hot air balloon and matches the Fresh Freesia. I used the piece with the pine trees as I thought it added a bit of depth, but there was another piece as well that had more sky over a lake that would also work. Cut this to 4” x 5 ¼” and round the corners

With some scraps of Petunia Pop card stock and your hot air balloon dies, cut the background balloon, the banner and the Hello banner (which came with the hot air balloon dies). With a scrap of a tan or brown cut the basket and with some scraps of Fresh Freesia cut the three stripes for the balloon. Adhere the three stripes to the balloon and then add the banner. Take two pieces of twine and adhere to the basket and then to the balloon to show the basket floating below the balloon.

Take your Fresh Freesia card base and your Thoughtful Journey paper and adhere to the front of the card base. Then add pop dots to the back of your balloon and basket and adhere to the front of your card. Then I cut to small pieces of a pop dot and added to the back of the Hello banner and adhered to the bottom right of the card.

For the inside of your card, cut a piece of white card stock to 4” x 5 ¼” and round the corners. Take the leftover piece of your Thoughtful Journey paper and cut a piece to 1 ¾” x 5” and round the two corners to the left and adhere to the left of the inside of your card. Take the Mixed Labels stamp set and your Fresh Freesia ink and stamp the “just a note to let you know you’re on my mind” to the upper right of the white portion.

Adhere your white piece to the inside of your card.

That is all there is to making this cute hello card to let someone know you are thinking of them.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Thoughtful Journey Slant Front Card

March 2, 2025 No Comments

The paper in the Thoughtful Journey designer series paper pack from Stampin’ Up is so beautiful that it doesn’t need much help with decoration, it is the star of every card it is used on.

To create this card, you just need a few things:

Petunia Pop card stock
Fresh Freesia card stock
Thoughtful Journey designer series paper
Memorable Blooms stamp set
Fresh Freesia ink
Brushed Brass Butterfies embellishments
Scoring board or scoring blade for your paper trimmer
Paper trimmer
Adhesive of choice

With your Petunia Pop card stock cut a card base to 4 ¼” x 10” and score at 5 ½”. Fold on the score mark. With the Fresh Freesia card stock cut a piece to 4” x 4 3/8” and a second piece to 4” x 5 ¼” for the inside. Then choose a piece of the Thoughtful Journey designer series paper that matches the card stock and cut to 3 ¾” x 4 1/8” and a piece to 1” x 3 ¾”. I choose the one with bunches of purple flowers, but you could also use one of the two thistle papers. Layer your Thoughful Journey piece on top of the smaller Fresh Freesia and then onto the shorter front piece of your card base, all aligned to the right end of the front and cut your slant so they will all align when you adhere them. Once cut, you can then adhere the Fresh Freesia to the Petunia Pop card front and the Thoughtful Journey piece on to that.

Take your inside piece of Fresh Freesia you cut earlier and adhere to the inside of your card. Now with the “Thanks so much” stamp from the Memorable Blooms stamp set from Stampin-Up and your Fresh Freesia ink and stamp your greeting in the upper right corner centering in the space. With your Brushed Brass Butterflies embellishments, adhere a few to the front of your card and one with your greeting. With the 1” x 3 ¾” piece of Thoughtful Journey paper, adhere that to the left side of the inside of your card for decoration.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Nests of Winter Banner Pop-Up Card

February 28, 2025 No Comments

The Winterly Tree Tops paper is so pretty and can take so much of the work out of making a card. This card is the perfect example of that.

To create this card, you just need a few things:

Grey Granite card stock
White card stock
Nests of Winter designer series paper
Winterly Tree Tops stamp set
Grey Granite Ink
Paper trimmer
Adhesive of choice
Pop-Dots

With the Grey Granite card stock cut a card to 4 1/4” x 11” and fold in half to 4 ¼” x 5 ½”. Also cut a strip of Grey Granite to 1” x 11” scored at 2 ¾”, 5 ½” and 8 ¼”. Cut a piece of White card stock to 4” x 5 ¼” and adhere to the front of your Grey Granite card base. Get your Nests of Winter designer series paper out and find one of the pieces that have the pussy willows with the birds on the bottom and top of the paper. Cut a section to 4” x 4 ¼” making sure you have the birds positioned where you want them for the section of paper you are using. Find two spots with birds that you can cut to 1 ¾” x 1 ¾” and also cut two pieces of White card stock to the same 1 ¾” x 1 ¾”. I also cut a ½” x 1 ¾” of a bit of pussy willow for the bottom of one of the white pieces. Cut four squares out of the Grey Granite to 2” x 2”. Adhere your 4 pieces cut to 1 ¾” x 1 ¾” to each of the Grey Granite pieces. On the plain white one get the “many thanks and much love” stamp from the Winterly Tree Tops stamp set and stamp it with your Grey Granite ink.

Find a piece of designer series paper from your Nests of Winter pack that has the white birch trees with the birds. Cut two pieces to 4” x 5 ¼” and adhere one to the inside top portion of your card and the other to the inside bottom portion. Now take the Grey Granite strip you cut and scored and accordion fold it. Adhere the top section centered to the top of your card with the center part of your accordion fold popping up and then adhere the bottom section to the bottom of your card. Now adhere you 2” x 2” pieces from top down centered in each section of your grey accordion strip with one of the birds in the top section. Your word stamped piece in the second section, the second bird one in the third section and the plain white with the strip of pussy willow to the bottom section.

And that is it, you have an adorable, easy pop-up card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade by and photos taken by DaisyChainFun.

Cards, Papercrafting

Countryside Inn Foxy Tri-Fold Card

February 28, 2025 No Comments

This elegant foxy tri-fold card made with the Countryside Inn designer series paper from Stampin’ Up is just adorable and easy to make.

To create this card, you just need a few things:

Night of Navy card stock
Balmy Blue card stock
White card stock
Countryside Inn designer series paper
Three stacked Oblong Nested dies
Sizzix Forest Friends (not sure on the name) dies
Small floral dies
Framed Florets stamps
Night of Navy ink
Embellishments to decorate the center of the flowers
Scoring board or scoring blade for paper trimmer
Paper trimmer
Adhesive of choice

With the Night of Navy card stock cut a piece to 3” x 9” and another to 3” x 4 ¼”. Score the 3” x 9” piece at 4 ¼” and at 8 ½”. Fold the 9” piece in half and then fold the half inch piece in the opposite direction. Put adhesive on the ½” piece and adhere the 3” x 4 ¼” piece to make a z-fold. Find the blue striped piece from the Countryside Inn designer series paper pack. Cut three pieces to 2 ¾” x 4” and adhere to each panel of the z-folded card base.

With your Night of Navy card stock die cut three of the largest panels which are about 4 ½” long. In the Countryside Inn designer series paper pack find the paper that has the foxes on it, use the middle size die or next size down to cut three of these. With White card stock us the next size down cut two. Cut out one each of the fox and the racoon (which looks like a fox) with Night of Navy card stock and Balmy Blue card stock and adhere the pieces together. For the racoon version, just take the Balmy Blue tail and cut it with a jagged edge instead of the double stripes for the racoon. With Night of Navy, Balmy Blue and White card stock scraps cut some flowers for decoration.

With the two white oblong octagons, Night of Navy ink and the “wishes for a beautiful birthday” and stamp that on one toward the top, then with the “for a special person on a special day” stamp that onto the other white one toward the top as well.

Now take all the oblong octagon pieces and adhere the three fox designer series paper to the three Night of Navy pieces. Add the two white ones to two of the pieces. Take the back one with the “for a special person on a special day” and put adhesive slightly less than half way up from the bottom and adhere to the back panel. You want it to measure 5 ½” in total so that it is the proper size for an envelope. Put adhesive about 1/3 of the way up for the piece that doesn’t have a white panel, line it up face down on the back one and fold the middle panel down so that they line up perfectly. Now put adhesive on the front panel about 1/3 of the way up and with the card folded, align with the other panels so that when the card is folded it should only show the front panel.

This now gives you the Countryside Inn Foxy tri-fold card with this beautiful fox paper in these elegant blues.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Delightful Wishes Double Gate Fold Card

February 25, 2025 No Comments

Send some appreciation to someone with this bright and cheerful double gate fold card. This Delightful Wishes set is so beautiful and you can’t beat the Floral Delight designer series paper.

To create this card, you just need a few things:

Daffodil Delight card stock
Lemon Lolly card stock
Crumb Cake card stock
White card stock
Floral Delight designer series paper
Delightful Wishes stamp set and dies
Memorable Blooms stamp set and dies
Limon Lolly ink
Daffodil Delight ink
Old Olive ink
Scoring board or scoring blade for paper trimmer
Paper trimmer
Bone folder
Adhesive of choice
Pop-Dots

With your Lemon Lolly card stock cut your card base to 5 ½” x 11” and score at 1 ¼”, 3 3/8”, 7 5/8” and 9 ¾” and fold up from the center and then out on the ends. Take a piece of White card stock and cut that to 3 ½” x 8 ¼” and score at 1 1/8”, 2 5/8”, 5 5/8” and 7 1/8” and fold the same with coming up from the center and out on the ends. Use a bone folder on all your fold edges to make sure they are folding flat. Then take your Daffodil Delight and cut a piece to 4” x 5 ¼” and two strips at 1” x 5 ¼”. With your floral delight designer series paper find the Forsythia paper and cut a piece to 3 ¾” x 5”.

Now take your Delight Wishes stamp set and dies and the Crumb Cake card stock and cut two sticks with the stick die. Get your Old Olive ink, White card stock and the double leave stamp and stamp and die cut out 5 of them. Take more White card stock, your Lemon Lolly ink and the solid Forsythia back group stamp and stamp three of these. Then change the stamp to the Forsythia detail stamp and with your Daffodil Delight ink and light up the stamp and stamp on the detail over the background stamped items that you stamped in Lemon Lolly. Use the Forsythia die and cut out the three sets of flowers. Arrange and adhere one set to each and two leaves to each of the sticks. Find your White scored piece of card stock for your inside and with your Memorable Blooms stamp set stamp “I appreciate your thoughtfulness” on the inside as a greeting and then decorate with the remaining set of Forsythia flowers and one last leaf. Take a spare piece of White card stock and your Old Olive ink and stamp “Thanks so much” from the same Memorable Blooms set and use the small label die from that set to cut it out.

Now it is time to put all the pieces together. Start with your Lemon Lolly card base and adhere the Daffodil Delight 4” x 5 1/4 “ piece to the center and then adhere the Forsythia designer series paper centered on the Daffodil Delight piece. Then take the scored white piece and adhere one side centered to the top fold on each side of your Lemon Lolly card base which leave it floating up about ¾” from the back of the card. Find your two 1” x 5 ¼” strips of Daffodil Delight and adhere that over the white and the other flaps on each side. Then take you Forsythia sticks and adhere to each side, making sure they are not hanging over in the middle so that the card can close. Adhere the “Thanks so much” label to the lower right flap.

There is the Double Gate Fold card. You may want to incorporate a ribbon in to tie at the front to help keep it closed, but I think it being open is the appeal of this card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Wildflower Birthday Level-Up Card

February 24, 2025 No Comments

This Wildflower Birthday set is such a girly and pretty set of paper, I am just obsessed. It comes with two sheets of cut-out shapes as well, which I didn’t use for this card but have on others.

To create this card, you just need a few things:

Wildflower Birthday specialty designer series paper
Mixed Labels stamp set and dies
Pretty in Pink card stock
White card stock
Pool Party ink
Scoring board or scoring blade for paper trimmer
Paper trimmer
Adhesive of choice
Pop-Dots

With the Pretty in Pink card stock cut a card base of 4 ¼” x 11” and score to 1 ¾”, 3 1/8”, 3 ½”, 7 ½”, 7 7/8” and 9 ¼”. The center four scores fold up and the two outside pieces fold out.

Grab a piece of White card stock and cut a piece to 3 ¾” x 4”, one to 1 ½” x 4”, 7/8” x 5 ½” and one to 3” x 3 ¾”. Now grab the Wildflower Birthday specialty designer series paper and cut a piece of the pink and white gingham paper to 3 ½” x 3 ¾” and two strips to 1 ¼” x 3 ¾”. The find the paper with the cakes and cut a strip of cakes to 1” wide making sure you are lining up to center the cakes and then cut to a length of 3 ½”, but making sure you are getting your cakes close to the top as the bottom area will get covered. Then with the Pool Party banner piece cut a strip to 5/8” x 5 ¼” which should give you three banner stripes, and then another piece for the back of the card measuring 5/8” x 3 ¾”.

Take a scrap piece of White card stock and your Pool Party ink and stamp the “You’re Pretty Wonderful” and then use the label die to cut it out.

Now it is time to assemble it all together. Take your Pretty in Pink card base and your 3 ¾” x 4” White cards stock piece and the pink gingham measuring 3 ½” x 3 ¾” and adhere the gingham onto the white. Then adhere the white to the center of the card base. Grab the label and adhere with pop dots to the upper center of the card center. Take your two white strips measuring 1 ½” x 4”, the two pink gingham strips and the two cake strips and adhere the cake strips to the pink gingham and the pink gingham to the white strips and then adhere each of those to the front ends. Now take the white strip measuring 7/8” x 5 ½” and the Pool Party strip measuring 5/8” x 5 ¼” and adhere to the white strip. Then adhere that strip to the bottom of each end of the card flaps.

Now take the last piece of white measuring 3” x 3 ¾” and adhere in the center of the back of the card. Then adhere the Pool Party banner strip toward the bottom of the white piece. You can add an additional greeting here in Pool Party ink if you choose to.

This adorable card is ready to give to a good friend or sister or whoever else would enjoy receiving this cute card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Flowering Rain Boots Card

February 23, 2025 No Comments

I had to have this Flowering Rain Boots stamps and dies set when they came out as I just love goloshes, especially mine, but they are purple (though I would prefer polka dot).

To create this card, you need a few things:

Sahara Sand card stock
Petal Pink card stock
Cinnamon Cider card stock
White card stock
Polka dot designer series paper in Sweet Sorbet and Petal Pink (this was a Tulip pack that came out with the Flowering Rain Boots set but don’t know the name of it)
Flowering Rain Boots stamp set and dies
Cheerful Daisies label die
Umbrella die if you have one (nice touch but not required)
Rain drops embossing folder
Sahara Sand ink
Cinnamon Cider ink
Sweet Sorbet ink
Petal Pink Light and Dark Stampin’ Blends markers
Paper trimmer
Adhesive of choice

The list of what you need looks like a lot, but it is all mainly little scraps excluding the Sahara Sand and Petal Pink card stock. Take your Sahara Sand card stock and cut a piece to 5 ½” x 8 ½”, folding in half to 4 ¼” x 5 ½”. Then cut another piece to 4” x 5 ¼”. With your Petal Pink card stock, cut a piece to 4 1/8” x 5 3/8” and a second piece for the inside of your card to 4” x 5 ¼”.

Now take a piece of Cinnamon Cider card stock, your Cinnamon Cider ink and the clay pot stamp from the Flowering Rain Boots set and stamp the pot. Use the clay pot die to cut out your clay pot along with the rake. I then dabbed the hand of the rake in the Cinnamon Cider ink to give it a bit of a darker color. Take a scrap piece of white, your Sahara Sand ink and the daisies stamp from the Flowering Rain Boots set and stamp the daisies. Use your Petal Pink Light and Dark Stampin’ Blends marker to color in your daisies. Then take your Petal Pink Light Stampin’ Blends marker and color a background for the seed pack, and then with your Sweet Sorbet ink stamp off first and then stamp your seed pack on your colored Petal Pink background. “Stamp off” mean to ink your stamp as normal and then stamp it lightly onto a scrap and then stamp with it, this gives you’re a lighter color. Take a scrap piece of Petal Pink card stock and the Sweet Sorbet ink and stamp the “rain or shine I’m here for you” and use the label die from Cheerful Daisies to cut out the greeting.

Now take the polka dot designer series paper and your Sahara Sand ink and with the rubber boots or goloshes stamp and then use the die to cut these out. I added an additional touch for the inside which was to die cut out an umbrella with the polka dot paper as well, but that is not part of the Flowering Rain Boots set, that is a die I have from InLoveArts, so if you don’t have an umbrella die then just skip this step.

Let’s assemble. Take your Saraha Sand card base and adhere the 4 1/8” x 5 3/8” piece of Petal Pink to the front of it. Take your piece of Sahara Sand card stock and run it through an embossing machine with the raindrops embossing folder and then adhere that to the front of the petal pink piece on the front of your card. Now adhere your pieces: Rain boots or goloshes, the pot with the daisies overlapping on the top, the seed pack slightly over the edge of the pot and the rake over top of the seed pack. Add your greeting label to the upper right corner.

Now for the inside, take your remaining piece of Petal Pink we cut for the inside and if you have an umbrella adhere that in the upper right corner of the Petal Pink piece. With your Sweet Sorbet ink and the “every storm that comes also ends” stamp from the Flowering Rain Boots set stamp your greeting. Adhere that to the inside of your card.

You now have such a cute card to give to someone who if feeling a bit down.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.