Stampin Up – Page 18

Floral Delight Accordion Window Flip Card

February 8, 2025 No Comments

This is a pretty straight forward easy card that is so cute. With the Floral Delight designer series paper from Stampin’ Up, it is just so cheery and bright.

To create this card, you just need a few things:

Lemon Lolly card stock
White card stock
Floral Delight designer series paper
- Large floral piece (both sides)
- Dainty little flower piece
Spring Corners stamp set
Three rectangle nesting dies – I used the Stampin’ Up Rectangle Stitched dies
Old Olive ink
Lemon Lolly ink
Old Olive Stampin’ Write marker
Paper trimmer
Scoring board or scoring blade for your paper trimmer
Adhesive of choice
Pop-Dots

With your Lemon Lolly piece of card stock, cut a piece to 5 ½” x 8 ½” and fold in half to 5 ½ x 4 ¼”. Take the white card stock and cut to 5” x 8” and score at 2”, 4” and 6”. Fold the 2” part down, the 6” part down and the 8” part up. Take the dainty flower paper from the Floral Delight designer series paper and cut a piece to 4” x 5” and score in half at 2”. Fold that in half and adhere to the 4” and 6” center sections of your scored white card stock (see photo below).

Take your largest of the tree nested rectangular dies and center it at the front half of your Lemon Lolly base and cut the front panel. Then use the back of the large floral piece of designer series paper that is Old Olive and cut a rectangle with the middle size die. Then take some white card stock and cut the smallest size rectangle. Take the front side of the large floral designer series paper and cut out one of the flowers for the front of your card.

Now grab your Spring Corners stamp set and stamp the “you brighten my day” stamp toward the top of the white rectangle piece and adhere your cut out flower to the bottom of the white piece. Adhere the white rectangle to the Old Olive rectangle and then the Old Olive rectangle to the Lemon Lolly rectangle.

With your Spring Corners stamp set and the Old Olive ink stamp the “happy we are friends” corners stamp in the upper right corners of the back of your white card stock insert. Then take the little coneflower stamp and ink it with your Lemon Lolly ink pad and then take your Old Olive Stampin’ Write Market with the large calligraphy end and ink the stems and leaves of the stamp and also the flower centers. Huff (blow a warm breath onto the stamp to re-moisten then stamp it in the center of your “happy we are friends” on the back of your card insert.

Lets assemble the card. Take your white insert piece and the card base, and on the inside front cover of your card base put adhesive to the center edge of your cut out and across the top and bottom of your cut out halfway, but make sure that you leave a half inch without adhesive at the top and bottom. Now adhere the front 2” white section of your cardstock to the back of your cutout on the card base. Now put adhesive on the back of your back white panel, fold it all to the front of the card and then close the back of the card which will align it so it will open to the square it needs to.

All that is left to do is put adhesive on the back left side of your rectangle cutout and adhere that to the dainty floral side with the card closed so you can just put it back in the cut-out, so it is lined up properly.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade by and photos taken by DaisyChainFun.

Cards, Papercrafting

Tri-Fold Valentine Card

February 5, 2025 No Comments

This beautiful tri-fold valentine card is so fun to make and give to anyone. It is very basic wit just some cutting, scoring, folding and die cutting a bunch of different hearts and the arranging them however you like.

To create this card, you just need a few things:

Real Red card stock
Flirty Flamingo card stock
White card stock
Variety of heart dies and\or punches
Paper trimmer with a scoring blade or a score pad
Adhesive of choice
Pop-Dots

Take your Real Red card stock and cut a piece 5 ½ x 8 ¼”. Then you will need to score that at 2 1/8”, 3 1/8”, 5 1/8” and 6 1/8”. Then fold accordingly to fold your card as below.

Then take your pink Flirty Flamingo card stock and cut two pieces to 1 7/8” x 5 ¼” and one piece to 1 ¾” x 5 ¼”. Now with the white card stock cut two pieces to 1 5/8” x 5” and one piece to 1 ½” x 5”. Layer each of the two 1 5/8” white pieces onto the 1 7/8” pink pieces and then the one piece of 1 ½” while onto the 1 ¾” pink piece. The single size piece goes into your middle layer and the two pieces go on the front and back panels.

Now just die cut and\or punch a bunch of different heart shapes, sizes and decorations and arrange them how you like on each panel. Just make sure they show how you want when the panels are flat as well. I put the big red heart on the front panel and then placed the rest around that so they all showed nicely. I also put a few of the hearts on the front panel on pop-dots just to add some depth. I also found a cute little saying and put it on at tag on the front large heart.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are made by and photos taken by DaisyChainFun.

Cards, Papercrafting

Wildflower Birthday Cake Cut-Out Card

February 1, 2025 No Comments

This adorable card is so easy to make and hardly even requires stamping, it is mainly using the cut-outs that come with the Wildflower Birthday Designer Series Paper pack from Stampin’ Up’s January-April 2025 Mini catalog. It comes with the normal double-sided paper and then two sheets to cut-outs as well.

To create this card you just need a few things:

White card stock
Peach Pie card stock
Wildflower Birthday Designer Series Paper pack
Peach Pie ink pad
Paper trimmer
Adhesive of choice
Pop-Dots

To start cut your Peach Pie card stock into 4 ¼” x 11” and fold in half to 4 ¼” x 5 ½”. Then cut another piece of the Peach Pie card stock to 2 ¾” x 4 ¼”. Now take your piece of white card stock and cut two pieces to 4” x 5 ¼” and another to 2 ½” x 4”. The last is to take a piece of the Peach Pie Daisy paper from your Wildflower Birthday Designer Series Paper pack and cut a piece 3 ¾” x 5”. That takes care of all the cutting.

Let’s build our layers for the front of the card. Take your card base and adhere one of the 4” x 5 ¼” pieces of white card stock to the front of the card. Then adhere your Peach Pie Daisy piece of card stock onto the white. Add the 2 ¾” x 4 ¼” piece of Peach Pie card stock and then lastly the 2 ½” x 4” white piece of card stock. From the Wildflower Birthday pack take the larger peach cake cut-out from one of your pieces, along with one of the very small flower groupings and one of the cupcakes, I used the one with the peach paper and teal frosting.

First, take the small flower cut-out and adhere it to the cake base for decoration, then take the cake cut-out and add Pop-Dots to the back of the cake and adhere it to the center of the top white piece of card stock to finish the front of your card.

Take the last piece of white card stock for the inside of your card and adhere the cupcake to the lower right corner. For the inside greeting I used the Delightful Wishes stamp and die set where I took my Peach Pie ink and stamped “wishing” onto a piece of white card stock and then took the wishing die and cut out my stamped wishing. I adhered that to the top of the white card stock inside piece. Finally, I stamped “you a happy birthday” under the wishing die cut greeting. Now adhere your white inside piece to the inside of your card.

Wasn’t that easy and quick, and it is such a cute card.

If you are interested in seeing other card ideas please visit my blog at www.daisychainfun.com. Also ,if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All photos taken by DaisyChainFun.

Cards, Papercrafting

Legendary Ride Authentic You Card

January 26, 2025 No Comments

The Legendary Ride Authentic You birthday card is a fun card for the men in your life or for women who also enjoy motorcycles. This black and white car showcases the motorcycle.

Other items you will need are the following:

Legendary Ride stamp set
Legendary Ride die set or scissors
Basic Black card stock
Smokey Slate card stock
White card stock
Tire tread paper from the Legendary Rides paper pack
Basic Black ink pad
Metal Plate 3D embossing folder
Black or silver embellishment
Paper trimmer
Your preferred adhesive
Pop dots adhesive
A stamp block
Scissors

For the card base take a piece of basic black card stock and cut in half to 4 ¼” x 11” and then fold in half to 4 ¼” x 5 ½”. Then cut a pieces of white card stock to measure 4 1/8” x 5 3/8” for the front and a second to 4” x 5 ¼” for the inside. You will also need a piece of Smokey Slate card stock cut to 4” x 5 ¼”. Take the Tire tread paper and cut a piece to 2” x 4” and another to 1” x 4 ¼”.

Using the Metal Plate 3D embossing folder and the cut piece of Smokey Slate and emboss it. Adhere the piece of Smokey Slate to the front larger piece of White card stock. Then adhere this to the Basic Black card front. Now adhere the 2” x 4” piece of Tire Tread paper piece about a ½” or so down on the Smokey Slate embossed piece on the card front.

From the Legendary Ride stamp set, stamp the “Authentic You” stamp onto a piece of white card stock with Basic Black ink. Use the label die to cut a label. Adhere a black or silver embellishment to each side of the label for decoration. Put pop dots on the back of the label and adhere to the center of the Tire Tread paper.

Use another piece of White card stock and use your Basic Black ink pad to stamp the motorcycle from the Legendary Rides stamp set. Use the motorcycle die or scissors if you don’t have the die set to cut out the bike. Add pop dots to the back of the stamped motorcycle and adhere to the center of the bottom part of the grey on the card, about ¾” up from the bottom of the embossed Smokey Slate.

On the white card stock you cut for the inside of the card, adhere the 1” x 4 ¼” Tire Tread piece about ¼” up on the bottom. Take your Basic Black ink pad and the “Ride on it’s your birthday” stamp and stamp it toward the top of the white inside piece. Now adhere this to the inside of the card.

Enjoy this fun card.

All photos taken by DaisyChainFun.

If you are interested in seeing other card ideas please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

Cards, Papercrafting

Friendly Seagulls

January 22, 2025 No Comments

The Friendly Seagulls stamp set from the 2025 Stampin’ Up Sale-A-Bration sets is just so fun. It has three adorable seagull stamps and some cute sayings to go along with it. I used the “I love you more than french fries” but you can swap the french fries out for chips as well and then there is a chips stamp to use instead of the french fries. However, I liked the french fries because you could color it and make it stand out more, plus who doesn’t love french fries.

For the card base I used Crumb Cake cardstock to look like the color of sand. This is cut to 5 ½” x 8 ½” then folded in half to make a card measuring 4 ¼” x 5 ½”. Then I cut two pieces of white card stock to measure 4” x 5 ¼”, one for the front and one for the inside. Then you will also need a piece of Crumb Cake card stock cut to 1” x 2” and a piece of white card stock cut to ¾” x 1 ¾”, these are for the word label.

Other items you will need are the following:

Blending Brushes
Ink Pads
- Jet Black Staz-On Ink Pad or similar
- Smoky Slate Ink Pad
- Boho Blue Ink Pad
- Crumb Cake Ink Pad
Stampin’ Blends Pens
- Smoky Slate Light Stampin’ Blends Pens
- Smoky Slate Dark Stampin’ Blends Pens
- Crumb Cake Light Stampin’ Blends Pens
- Crumb Cake Dark Stampin’ Blends Pens
- Peach Pie Light Stampin’ Blends Pens
- Real Red Light Stampin’ Blends Pens
Paper Trimmer
Your preferred adhiesive
A stamp block
Scissors

Take one of the cut pieces of white card stock, your blending brushes and the Smokey Slate, Boho Blue and Crumb Cake ink pads. I started with Smoky Slate and blended it lightly for the start of the sky. Then I changed over to the Boho Blue and lightly blended over into the gray for the sky and then much darker for the water. Finally blended with the Crumb Cake to build the color for the sand. This forms your background for the front of your card.

I took a spare piece of white card stock and stamped the seagull with the french fries in his mouth with the Jet Black Staz-On ink. Then I stamped the french fries in the holder in the Jet Black Staz-On ink. Now take the second piece of card stock that you cut for the inside and stamp one of the other two seagulls in the lower right-hand corner in the Jet Black ink as well.

Gather your Stampin Blends pens. I used the light Smoky Slate to color the wings and tale of the french fry seagull and the inside seagull’s wings as well. Then the dark Smoky Slate I used to color the strips on the wings for both seagulls. Then color the feet and beak of both seagulls with the light Peach Pie. I then took the light Crumb Cake to color the french fries, the dark Crumb Cake to color the burger on the fry package and the light Real Red to color the french fry package.

Use your scissors to cut out the french fries and the seagull with the fries in his mouth. Adhere them to the sandy area of the sheet you created with your blending brushes for the front background. Then take your Crumb Cake ink and the shells stamp and stamp shells in the sand, I did one on each side of the seagull. Then take your Smoky Slate ink and the flying birds stamp and stamp that in the sky area, I also stamped those twice. Be sure to leave space for where you want to put your greeting.

Now stamp your “I love you more than French Fries” greeting in the Jet Black ink onto the white label piece you cut that is ¾” x 1 ¾”. Adhere that to the Crumb Cake piece you cut 1” x 2” and then adhere that to your card front. Adhere your card front to your card. Then adhere your inside white piece with the seagull stamped on it to the inside of your card. You are all done and I hope you love it as much I did.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com. Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501