Thank You – Welcome

Velvet Meadow Diagonal Z-Fold Card

June 24, 2026 No Comments

This large bold paper from the Velvet Meadow designer series paper with the flocking is so beautiful, it can stand alone. Adding the pink velveteen paper for an accent and stamps from the Flowering Meadow stamps and dies, all from Stampin’ Up just made this card shine.

To create this card, you just need a few things:

Peaceful Pine card stock (2026-2028 In Color Stampin’ Up)
Barely Blush Velveteen card stock (2026 Annual Catalog Stampin’ Up)
White card stock
Velvet Meadow designer series paper (2026 Annual Catalog Stampin’ Up)
Flowering Meadow stamp set and dies (2026 Annual Catalog Stampin’ Up)
Scalloped Blooms dies (2026 Annual Catalog)
Peaceful Pine ink (Stampin’ Up)
Daffodil Delight ink (Stampin’ Up)
Berry Burst Stampin’ Write Market (retired Stampin’ Up)
Paper trimmer

This card is all about the cutting, after that it just goes together quickly. From a piece of Peaceful Pine card stock cut a piece to 5 ½” x 11” and from the right-side angle down to 3” and then score from the right high side at 4 ¼ and 8 ½”. Fold into you’re Z-fold with the small front piece folding to the left.

From your white card stock cut the following:

Back panel – 4 1/8” x 5 3/8” and 3 ½” x 3 ¾”
Middle panel (front and back) – two pieces to 4 1/8” x 4 3/8”
Front panel – 2 3/8” x 3 3/8”

Now from the Velvet Meadow find the piece with the bright large flowers and the Peaceful Pine background and cut a strip to 5 ¼” x 12”. Then cut into three pieces measuring 4” each. And from the Barely Blush velveteen paper from the Velveteen Assortment Specialty designer series paper cut a piece to 2 ¼” x 3 ¼”.

For the back panel take the floral piece you cut from the right side and the white piece measuring 4 1/8” x 5 3/8” and line up and cut the angle to match your back panel. There are many ways to cut your angles to match, I tend to align the floral on the white and move up from the bottom 1/8” more and then align the white on the Peaceful Pine and again move up 1/8” more and then line up the diagonal on my cutter and cut them, but you can mark them and cut them that way or what works for you. Then take one of the white pieces for the middle panel and the middle floral piece and cut that diagonally. Then take the other white piece for the middle panel and the third floral piece, but you will cut the opposite angle as this goes on the back side of your middle panel so that it shows from the front. Then take the small white piece and the Barely Blush velveteen and do the same. Now adhere them all down to their appropriate panels.

With a piece of scrap white card stock and the Flowering Meadow stamp set find the daisy flower. Ink the stem part of the stamp in Peaceful Pine ink and then use your Berry Burst Stampin’ Write marker to ink the flower and stamp on your white card stock. Then find the large floral center stamp and stamp in Daffodil Delight ink. Use the dies to cut out both. Now take the “thanks” greeting stamp and stamp in Peaceful Pine ink and use the small label die from the Scalloped Blooms dies to cut out your label. Adhere your label to the front panel on your Barely Blush velveteen and then adhere the flower center to your daisy and then the flower stem over the straight left side of your label.

For the inside take your last piece of white card stock you cut and angle it to the same angle, since it is smaller you can use any of the angles. Adhere to your back panel center on three-sided from the bottom, making sure it will be covered when you close your card. Use the Peaceful Pine ink and stamp the “you always make me smile” greeting.

Such a bright and beautiful card to say thanks.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Patchwork Thank You Cards

June 18, 2026 No Comments

This patchwork thank you card is so quick and easy and if you use the right double-sided paper, you can cut twice with the InLoveArts Patchwork Boarder die and make two cards, just by cutting one from each side. This Strawberry Slush floral paper from Stampin’ Up’s Floral Impressions designer series paper made this the perfect paper for this card.

To create this card, you just need a few things:

Strawberry Slush card stock (2025-2027 In Colors Stampin’ Up)
White card stock
Floral Impression designer series paper (Stampin’ Up)
Impressions Abloom stamp set (Stampin’ Up)
Strawberry Slush ink (2025–2027 In Colors Stampin’ Up)
Patchwork Background Board die (InLoveArts)
Paper trimmer
Adhesive of choice

From your Strawberry Slush card stock cut two card bases to 5 ½” x 8” and fold in half. This card base is slightly smaller than normal to fit with the die so you don’t have large borders. With your white card stock cut two pieces for the inside of your card to 3 ¾” x 5 ¼”.

Take your Floral Impression designer series paper pack and find the piece with Strawberry Slush on the back and the pink floral on the front. With this paper there is a direction, so you do need to pay attention to that (which I didn’t for the first ones I cut and you also need to pay attention to the direction of your die to see if you want the large panels at the top or bottom. Since I didn’t pay attention, my florals are upside down on one and the triangle is toward the bottom instead of the top on the other to get the direction right, but that isn’t bad. Cut once with the flowers up and another with the Strawberry Slush design up. You will now have two strawberry slush boarders and two sets of floral panels. Then use some scrap pieces of white card stock to cut out two of the center panel.

Adhere your Strawberry Slush panels to the front of each card base and then use your floral panels to fill in the panels, leaving the center panel open for your white pieces.

Take the Impressions Abloom stamp set and find the “Thanks So Very Much” or Thans for being there” greeting and stamp with your Strawberry Slush ink on your center panel, then adhere to the center of your card.

With the “I appreciate you” greeting and your Strawberry Slush ink stamp this on the upper center of each of your inside white pieces and adhere to the inside of your card.

See how quick and easy that was and such cut cards.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Moonlit Flora Embossed Thankful for You Card

June 13, 2026 No Comments

I spent some time playing with the Fern & Flora 3D embossing folder and loved how this one turned out. Then I paired it with some paper from the Moonlit Flora designer series paper and used the Fern & Flora stamp set, all from Stampin’ Up, to make this pretty card.

To create this card, you just need a few things:

Secret Sea card stock (2025-2027 In Color Stampin’ Up)
White card stock
Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
Fern & Flora stamp set (2026 Annual Catalog Stampin’ Up)
Fern & Flora 3D Embossing Folder (2026 Annual Catalog Stampin’ Up)
Dewdrops Embellishments (2026 Annual Catalog Stampin’ Up)
Golden Glow ink (2026-2028 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice

From a piece of Secret Sea card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”. Then cut a piece to 3 ½” x 3 ½” and another to 1 1/8” x 3 ½”. With some white card stock cut to pieces to 4 1/8” x 5 3/8”, one to 3 3/8” x 3 3/8”, one to 7/8” x 3 ½” and another to 3 ¼” x 4 ½”. Take your Moonlit Flora designer series paper and find the Golden Glow piece with the four dot decorations, cut one to 4” x 5 ¼ and a second to 1” x 3 5/8”.

Let’s start by taking the white piece you cut to 3 ¼” x 4 ½” and your Fern & Flora 3D embossing folder. With your Golden Glow ink pad, open and swipe in along the flat part of your embossing folder where your folder will emboss into, so that the ink is only on the flat surface that will be the background. Lay your paper on the opposite raise side and fold your folder closed and run through your machine to emboss. This will put the ink onto the background of your paper leaving most of the embossed surface white. Set aside to dry well. Take the white piece you cut to 7/8” x 3 ½” and the “thankful for you” greeting stamp from the Fern & Flora stamp set and stamp in Golden Glow ink.

Take your Secret Sea card base and one of the 4 1/8” x 5 3/8” white pieces and adhere to the front. Then adhere the Golden Glow designer series paper piece to the front of the white. Now take the Secret Sea piece measuring 3 ½” x 3 ½, adhere to white square piece to the front of it. Grab your embossed piece and cut down to 3 ¼” to make it square, the part you cut off will be for the inside of your card, and adhere to the white piece. Adhere that to the upper portion of your card front, leaving an equal area on the three sides. Now take the label piece of Secret Sea, adhere the Golden Glow paper piece to it and then your stamped white piece to that. Adhere to the lower portion of your card again leaving an equal amount on three sides. Take two of the larger Secret Sea embellishments from the Dewdrop Embelishments and add one to each end of your label.

For the inside of your card adhere the white piece measuring 4 1/8” x 5 3/8”. With your Golden Glow ink stamp the “you’re an amazing friend” greeting in the upper portion. Adhere the embossed piece you cut off at the bottom, again leaving equal space on three sides.

I am just in love with this card and can’t wait to give it to someone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Velvet Meadow Floral Lineup Card

June 9, 2026 No Comments

This cute card uses the Velvet Meadow designer series paper with the white flocking and the dies from Flowering Meadow and stamps and dies from Scalloped Blooms, all from Stampin’ Up. I used the die to cut out the flowers for the side from the paper instead of trying to color them.

To create this card, you just need a few things:

Peaceful Pine card stock (2026-2028 In Color Stampin’ Up)
Basic Beige card stock (Stampin’ Up)
Velvet Meadow designer series paper (2026 Annual Catalog Stampin’ Up)
Flowering Meadow dies (2026 Annual Catalog Stampin’ Up)
Scalloped Blooms stamps and dies (2026 Annual Catalog Stampin’ Up)
Peaceful Pine ink (2026-2028 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

From a piece of Basic Beige card stock cut a card base to 5 ½” x 8 ½”, then fold in half to 4 ¼” x 5 ½”. From a piece of Peaceful Pine cut a piece to 2 ¾” x 5”. With the Velvet Meadow designer series paper find the Basic Beige piece with the pink flowers and then the Basic Beige slightly textured looking paper. From the Basic Beige textured looking paper cut a piece to 4” x 5 ¼”. Then with the pink floral paper cut a piece to 2 ½” x 4 ¾”.

Take the double flower die from the Flowering Meadow dies and die cut 5 of the double pink flowers from some of the extra pink floral paper, or you can stamp and color them if you prefer not to cut up your paper. Then cut 7 of the leaves from the paper with a pair of scissors, or you can use the three leaf due and cut some out of Peaceful Pine card stock and cut them up.

Adhere the floral piece measuring 2 ½” x 4 ¾” to the Peaceful Pine card stock piece. Now adhere three of your double cut flowers to the back on the right side, starting to adhere one in the center and then the other two to the top and bottom. Adhere four of the leaves to the back of the flowers as desired. From a scrap piece of Basic Beige use the longer label die with the scallops on the right end to cut out a label. Use Peaceful Pine ink to stamp the “you’re a blessing to me” greeting to the right side of your label. Take one of the double cut flowers and a pair of scissors to cut the flowers apart and use the full flower to adhere to the left end of your label and use one of the cut-out leaves with it.

Use pop dots to adhere the large piece with your flowers to the front of your card base. Then use more pop dots to adhere the label to the lower portion of your floral paper, about ½” up from the Peaceful Pine border with the right scalloped side hanging over.

For the inside of your card adhere your last double flowers to the lower left corner of the back panel along with the two remaining leaves. Use Peaceful Pine ink to stamp the “thank you” greeting in the upper center of the back panel of the inside of your card.

A lovely card to thank someone special to you who helps when you really need it.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Moonlit Flora Thankful for You Card

June 7, 2026 No Comments

The new Golden Glow card stock adds a bit of brightness to the lovely Moonlit Flora designer series paper from Stampin Up with the beautiful stamps and dies to go with it in the Fern & Flora set.

To create this card, you just need a few things:

Golden Glow card stock (2026-2028 In Color Stampin’ Up)
Mossy Meadow card stock (Stampin’ Up)
Old Olive card stock (Stampin’ Up)
White card stock
Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
Embossing folder (retired Stampin’ Up)
Mossy Meadow ink (Stampin’ Up)
Golden Glow ink (2026-2028 In Color Stampin’ Up)
Blending brush
Paper trimmer
Adhesive of choice
Pop dots

Cut a piece of Golden Glow card stock to 5 ½” x 8 ½” for your card base and fold in half to 4 ¼” x 5 ½”. Cut another piece to 1 ¼” x 5 ¼”. From Mossy Meadow cut a piece to 4 1/8” x 5 3/8”. With some white card stock cut a piece for the inside of your card to 4” x 5 ¼”. Then from the Moonlit Flora designer series paper find the piece with the Golden Glow flowers and cut to 3” x 5 ¼”.

Take the Golden Glow piece you cut to 1 ¼” x 5 ¼” and emboss with an embossing folder (this is a Stampin’ Up embossing folder but I am not sure of the name, but any with a subtle design would work). With a piece of Mossy Meadow card stock cut the large leaf and fern dies, and with Old Olive use the fern and frond dies to cut those out.

Adhere your 4 1/8” x 5 3/8” piece of Mossy Meadow to the front of your card base. Then adhere the fern designer series paper piece to the top portion of the top of the Mossy Meadow, leaving about an 1/8” around top, left and right sides. Then adhere your Golden Glow embossed strip to the bottom portion. Adhere the Mossy Meadow large leaf and the Old Olive fern and frond pieces onto the Golden Glow strip to the left side. Stamp the “thankful for you” greeting in Mossy Meadow ink and then the label boarder around it from the Fern & Flora stamp set. Use the label die to cut it out. Adhere the label with pop dots over the ferns.

For the inside take the white piece you cut and with the Golden Glow ink and a blending brush and highlight the outside edge. Adhere the fern to the right corner. Stamp in Mossy Meadow ink the “You’re an amazing friend” greeting stamp in the upper middle. Adhere to the inside back of your card base.

A pretty thank you card for a great friend.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Floral Charm Thank You Floral Strip Card

May 20, 2026 No Comments

This card made with strips of paper turned out cute. It was made with the Floral Charm designer series paper from Stampin’ Up and the Charming day stamp set.

To create this card, you just need a few things:

Mossy Meadow card stock (Stampin’ Up)
Timid Tiger card stock (2025-2027 In Color Stampin’ Up)
White card stock
Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
Charming day stamp set (July 2025 Online Exclusive Stamp in’ Up)
Two layered label dies
Mossy Meadow ink (Stampin’ Up)
Scissors
Paper trimmer
Adhesive of choice
Pop dots

With the Mossy Meadow card stock cut your card base to 5 ½” x 8 ½” and fold in half. Take your Timid Tiger card stock and cut two pieces to 4 1/8” x 5 3/8” and then 4 strips to 3/8” x 4”. From white card stock cut an inside piece to 4” x 5 ¼”. Take your Floral Charm designer series paper pack find the orange floral piece and cut 5 strips to 7/8” x 4”, keeping them in order.

Take the Timid Tiger piece you cut to 4 1/8” x 5 3/8” and start adhering your strips. Start with the top adhering your top piece just at the top so you can slide your strip under. Fully adhere your bottom strip to the bottom of the Timid Tiger background. Then work at adhering your orange dividing strips and your three center floral strips, sizing them as close to the same as possible.

From a scrap piece of Mossy Meadow, cut the larger size laying label and from a scrap piece of white card stock cut the smaller label. With your Mossy Meadow ink and the “Thanks for Being You” greeting stamp from the Charming Day stamp set, stamp on your white label toward the right side. From a scrap piece of your floral paper cut out a floral section and adhere to the left side of your label, or you can stamp and color a flower and leaves to use (I am not the best at coloring so I rather fussy cut 😊). Adhere you white label with pop dots to your Mossy Meadow label and then adhere them to the front of your card about 1/3 of the way from the top.

For the inside of your card adhere your white card stock piece to the Timid Tiger piece and adhere to the inside of your card. From the Charming Day stamp set find the “you made my day” greeting stamp and with your Mossy Meadow ink stamp in the upper portion of your card. I had stamped and colored a flower for the front that I didn’t use so I used in on the inside, you could also fussy cut another. The stamped flower was colored with Light Timid Tiger and Light Mossy Meadow Stampin’ Blends.

This is a fairly neutral thank you card that could be given to most anyone to let them know you appreciate something they did to make your day brighter.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Moonlit Flora World A Better Place Card

May 5, 2026 No Comments

I am pretty infatuated with this new Moonlit Flora designer series paper from Stampin’ Up with the Fern and Flora stamps and dies. This block card was the perfect design for this paper to showcase the white moth’s and flowers. This lovely design came from my Stampin’ Up Upline and friend from her Facebook Live at MyStampinStyle.com.

To create this card, you just need a few things:

Secret Sea card stock (2025-2027 In Color Stampin’ Up)
Mossy Meadow card stock (Stampin’ Up)
Old Olive card stock (Stampin’ Up)
White card stock
Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
Secret Sea ink (2025-2027 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For you card base cut a piece of white card stock to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”. From white card stock also cut a piece to 3 ¾” x 5”, two pieces to 1 7/8” x 3 1/8” and two to 1 7/8” x 1 7/8”. Cut two pieces of Secret Sea card stock to 4” x 5 ¼”. From the Moonlit Flora designer series paper find the paper that has the white flowers and cut two pieces that have the flowers on them to 1 ¾” x 3” and then the paper with the white moths cut two pieces to 1 ¾” x 1 ¾”.

With the Mossy Meadow card stock cut out the large leaf die and the fern die and from the Old Olive card stock cut one of the fronds. From some white card stock cut out a few of the dainty flowers. Use the label die to cut out a label from the white card stock. Use the “you make the world a better place” greeting stamp and stamp on the label in Secret Sea ink.

With your white card base, adhere one of the Secret Sea pieces to the front. Then adhere each of your flower and moth pieces to the white pieces and adhere each to the front of your card with the two long pieces in opposite corners and then the square pieces in the other opposite corners, choose the corners based on the paper. Now trim the leaf down and adhere to the back left of the label, the frond and the fern (also trimmed down) to the front left of the label and then decorate with a few of the white flowers. Adhere the label to the right side of your card front with pop dots.

For the inside of the card adhere the second Secret Sea piece and then the white piece. Cut one of the larger leaf dies out of Old Olive, trim down and adhere in the upper left corner. Use your Secret Sea ink and the ‘thankful for you” greeting and stamp in the upper right section of the card next to the leaf piece.

Such a lovely thank you card for anyone that lets you say how much you appreciate them.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Delicate Dreams Scalloped Wishes Thanks Card

April 22, 2026 No Comments

I had some triangle pieces left from a different card I made so I came up with this design so that I could use them on this gate fold that opens in the middle. It uses the blue floral paper from the Delicate Dreams designer series paper from Stampin’ Up and the Scalloped Wishes dies and stamps.

To create this card, you just need a few things:

Hydrangea Hue card stock (2026-2028 In Color Stampin’ Up)
Pear Pizzaz card stock (retired Stamp’ Up)
White card stock
Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
Scalloped Wishes stamp set and dies (March 2026 Online Exclusive Stampin’ Up)
Hydrangea Hue ink (2026-2028 In Color Stampin’ Up)
Bordered Ribbon Hydrangea Hue (2026-2028 In Color Stampin Up)
Paper trimmer
Adhesive of choice
Pop dots

To cut your card base take a piece of white card stock and cut to 4 ¼” x 11” and score at 2 ¾” and 8 ¼”. Cut another white piece to 3 ¾” x 5” for the inside of your card. From the Hydrangea Hue card stock cut a piece to 2 7/8” x 2 7/8” and cut on the diagonal into to halves. In your Delicate Dreams designer series paper pack find the blue and white floral piece and cut two pieces to 2 5/8” x 4 1/8” and a piece to 2 ¾” x 2 ¾” which you cut in half on the diagonal as well.

From the Scalloped Wishes dies take a scrap piece of white card stock and cut the large plain label and dragonfly wings. With some scrap Hydranea Hue card stock cut the larger scalloped designed label and four flowers (two sets of two), along with a dragonfly body. Take a scrap of Pear Pizzaz card stock and cut out two of the longer leaf sprigs.

Now we can assemble, starting with taking your white card base and folding each side in to meet at the center. Take the two rectangle floral pieces and adhere one to each side of the front of your card. Take your floral triangles and adhere to the Hydrangea Hue triangles and adhere one of each to the outside edge of your floral pieces.

With the Hydrangea Hue label, adhere it to the larger white label. Then adhere one of your leaf springs to the left side along with two of the flowers. Grab your Hydrangea Hue ink and the “with sincere thanks” greeting from Scalloped Wishes and stamp to the right side. With your Bordered Ribbon cut a piece and tie a bow and adhere to the upper right side of your label. Adhere the left side of your label to the left side centered in your card front. Adhere the dragonfly body to the front of wings and adhere the dragonfly to the upper right of your card, making sure it doesn’t interfere with your card label when opening the card.

For the inside of your card take the 4” x 5 ¼” Hydrangea Hue paper and adhere the 3 ¾” x 5” white piece to it and adhere to the inside of your card. Adhere the leaf spring and two remaining flowers in the lower left corner of the inside.

What a lovely thank you card for a girlfriend or work mate who does something you should say thanks for.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Delicate Dreams Wheat Thank You Kindly Card

April 8, 2026 No Comments

A clean a simple muted thank you card made with Delicate Dreams designer series paper and Delicate Whispers stamp set from Stampin’ Up. The cute little tag is from the Tags to Go dies also from Stampin’ Up.

To create this card, you just need a few things:

White card stock
Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
Delicate Whispers stamp set and dies (March 2026 Online Exclusive Stampin’ Up)
Floral Phrases stamps (retired Stampin’ Up)
Tags to Go dies (retired Stampin’ Up)
Crumb Cake ink (Stampin’ Up)
Bakers Twine (Stampin’ Up)
Paper trimmer
Adhesive of choice

For you card base use white card stock and cut to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½” and cut a second piece to 1 ½” x 4”. From the Delicate Dreams designer series paper find the piece with the wheat decoration and cut a piece to 4” x 5 ¼”. Also find the Crumb Cake linen paper and cut a piece 1 ¼” x 4”.

Take the wheat designer series paper and adhere to the front of your card base. Adhere the linen strip to the white strip and then adhere to the left side of your card front, in about 1 ½” from the left side.

With some scrap white card stock and the “thank you kindly” stamp from the Delicate Whispers stamp set and stamp in Crumb Cake ink. Use the small long tag die from the Tags to Go dies set to cut out. Stamp the wheat piece in Crumb Cake ink and cut that out with the die. Adhere the wheat piece to the center of the front strip. Use some Bakers Twine and tie a bow in the whole on your tag and then adhere the tag to the right of your wheat.

For the inside of your card stamp the wheat from Delicate Dreams to the left side of the inside of your card in Crumb Cake ink and the “for all the thoughtful things you do” greeting from Floral Phrases.

A lovely thank you card for anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Notes of Spring Notes of Thanks Card

March 31, 2026 No Comments

Such a cute deer in this Notes of Spring stamp set from Stampin’ Up and adding the little dragonfly from the Scalloped Wishes stamp set was the touch it needed. The Wood Grain Wonders designer series paper made the perfect background.

To create this card, you just need a few things:

Pecan Pie card stock (retired Stampin’ Up)
White card stock
Wood Grain Wonders designer series paper (March 2026 Online Exclusive Stampin’ Up)
Notes of Spring stamp set (March 2026 Product of the Month Stampin’ Up)
Scalloped Wishes stamps and dies (March 2026 Online Exclusive Stampin’ Up)
Pecan Pie or Baked Brown Sugar ink (retired Stampin’ Up)
Pear Pizzazz (retired Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

From your white card stock cut a card base to 5 ½” x 8 ½” and fold in half. Cut a piece to 2 ½” x 2 7/8” to stamp on and one to ¾” x 2” for your label. From Peacan Pie card stock cut a piece to 4 ¼” x 5 ½”. With your Wood Crain Wonders designer series paper pack, find the piece in Pecan Pie color and cut a piece to 4 1/8” x 5 3/8”. Align one edge with both pieces and tear together to make a matching tear, repeat on each side giving you’re a small layer of the Pecan Pie layer.

With the white piece measuring 2 ½” x 2 7/8” and stamp the large ground piece and then the small one next to it in Pecan Pie ink (or Baked Brown Sugar ink as I didn’t have Pecan Pie) to form the ground. Stamp the large grass piece on the large ground piece and the small grass on the small ground. Take the small dragonfly from the Scalloped Wishes and stamp one in the upper right corner above the small grass.

On a scrap piece of white card stock stamp the deer outline in Pecan Pie ink and then with the fill-in stamp ink with your Pecan Pie ink and stamp off once and then stamp inside your deer outline. Use a pair of scissors to cut out your deer. On a small scrap of white stamp the small dragonfly in Pecan Pie ink and use the die to cut out. Use the Pear Pizzazz ink to stamp the “A little note of thanks”greeting on your white label. Adhere your dragonfly cutout to the upper left corner of your label with a half of a pop dot.

Adhere your two torn pieces together and then to the front of your card base. Adhere your stamped white piece to the upper portion of the Wood Grain paper on the front of your card. Use pop dots to adhere the deer over the ground stamps with the grasses showing. Adhere the label to the lower right side.

For the inside I didn’t put a greeting as I was just leaving it as a note, but I did stamp another of the small dragonfly in the upper left corner and a deer in the lower left corner using the same technique of stamping the outline and stamping off the fill-in.

That little deer is so cute and made a pretty thank you card for anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.