Fern & Flora Diamond Stepper Card

I have had this Diamond Stepper card written down as a planned outline for a while but finally decided this was the paper I wanted to use for this design because I could use the fern die cuts as some perfect accents.  This design uses the Moonlit Flora designer series paper and the Fern & Flora stamp set from Stampin’ Up to show off this card.

To create this card, you just need a few things:

  • Secret Sea card stock (2025-2027 In Color Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • Old Olive card stock (Stampin’ Up)
  • White card stock
  • Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
  • Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
  • Golden Glow Ink (2026-2028 In Color Stampin’ Up)
  • Scoring board or scoring blade for your paper trimmer
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

With a piece of Secret Sea card stock cut your card base to 4 ¼” x 10 ½” and score at 1 ¼”, 2 ½”, 4 ¼”, 6” and 8 ¼”.  Starting with the small 1 ¼” end fold down and then the next small section up and accordion fold the rest forming your steps.  Also cut three pieces to 3” x 3” for your diamonds.  From some white card stock cut a piece to 2 7/8” x 2 7/8” for your back greeting panel.  From the Moonlit Flora designer series paper pack find the Golden Glow piece with the small dotted triangles and then find three of the fern pieces that have Secret Sea in them, I used the two different pieces that had the golden glow flowers (one with the white moths) and then the piece with the white flowers.  From the Golden Glow paper cut two pieces to 1 1/8” x 4 1/8”, two to 1 5/8” x 4 1/8” and two to 2 1/8” x 4 1/8”, then adhere each piece to the appropriate panels on the step or your card base.

From the fern papers, cut one of each of the fern pieces to 2 7/8” x 2 7/8” making sure you cut them to include what you want and that they are going the right direction for the pattern.  To make sure I got what I wanted in the correct direction I laid one of my 3” secret sea pieces on and drew around it with a pen and then cut it out to the 2 7/8” square so the pen marks were then cut off.  Adhere each of your fern pieces to your Secret Sea pieces.

From your Mossy Meadow card stock cut one of the large leaf pieces and two of the medium fern pieces and from Old Olive cut one of the other medium fern pieces and two of the fern fronds.  From the piece of fern paper the has the smaller orange flowers use the matching die to cut out one of the floral sprigs.  With your golden glow ink stamp the “you’re an amazing friend” greeting on a scrap piece of white card stock and trim around to a rectangle tag. 

To assemble, take your card base and your diamonds and choose which diamond you would like for the back.  Put adhesive in the bottom 1” of your diamond and adhere to the 5th panel with the 6th panel folded down, centered and measuring to about 5 ½” in height when your base is folded up.  Then adhere to middle triangle the same way centering over your back triangle about ½” lower.  Do the same for your front panel about ½” lower than that.  Then adhere the Mossy Meadow large leaf and the Old Olive fern piece to the left side of the back diamond, one of the two Mossy Meadow medium fern leaves and one of the Old Olive fronds to the right side of the middle diamond and the orange flower cut out to the right side of the front panel.  Then adhere the greeting to the left side of the front panel. 

For the back panel take the white diamond and adhere to the back of the diamond on the back of your card.  Adhere the two remaining fern pieces to the bottom slightly on your white diamond with the majority on the bottom Golden Glow panel.  Stamp the “thankful for you” greeting in Golden Glow ink in the upper portion of your white diamond.  The bottom portion of your white diamond may need to bend out so that your card will stand properly. 

I love the colors of this card and all the ferns, dark but with some bright pops, and lovely to let a friend know how much they mean to you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Moonlit Flora Thankful for You Card

The new Golden Glow card stock adds a bit of brightness to the lovely Moonlit Flora designer series paper from Stampin Up with the beautiful stamps and dies to go with it in the Fern & Flora set. 

To create this card, you just need a few things:

  • Golden Glow card stock (2026-2028 In Color Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • Old Olive card stock (Stampin’ Up)
  • White card stock
  • Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
  • Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
  • Embossing folder (retired Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Golden Glow ink (2026-2028 In Color Stampin’ Up)
  • Blending brush
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

Cut a piece of Golden Glow card stock to 5 ½” x 8 ½” for your card base and fold in half to 4 ¼” x 5 ½”.  Cut another piece to 1 ¼” x 5 ¼”.  From Mossy Meadow cut a piece to 4 1/8” x 5 3/8”.  With some white card stock cut a piece for the inside of your card to 4” x 5 ¼”.  Then from the Moonlit Flora designer series paper find the piece with the Golden Glow flowers and cut to 3” x 5 ¼”. 

Take the Golden Glow piece you cut to 1 ¼” x 5 ¼” and emboss with an embossing folder (this is a Stampin’ Up embossing folder but I am not sure of the name, but any with a subtle design would work).  With a piece of Mossy Meadow card stock cut the large leaf and fern dies, and with Old Olive use the fern and frond dies to cut those out. 

Adhere your 4 1/8” x 5 3/8” piece of Mossy Meadow to the front of your card base.  Then adhere the fern designer series paper piece to the top portion of the top of the Mossy Meadow, leaving about an 1/8” around top, left and right sides.  Then adhere your Golden Glow embossed strip to the bottom portion.  Adhere the Mossy Meadow large leaf and the Old Olive fern and frond pieces onto the Golden Glow strip to the left side.  Stamp the “thankful for you” greeting in Mossy Meadow ink and then the label boarder around it from the Fern & Flora stamp set.  Use the label die to cut it out.  Adhere the label with pop dots over the ferns. 

For the inside take the white piece you cut and with the Golden Glow ink and a blending brush and highlight the outside edge.  Adhere the fern to the right corner.  Stamp in Mossy Meadow ink the “You’re an amazing friend” greeting stamp in the upper middle.  Adhere to the inside back of your card base. 

A pretty thank you card for a great friend. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Fall for Toile Thankful Fox Card

This card uses the tree with boarder pieces from the Fall for Toile Paper Pumpkin kit from Stampin’ Up.  With the addition of the cute little fox, it is just a nice masculine fall card. 

To create this card, you just need a few things:

  • Fall for Toile Paper Pumpkin Kit (September 2025 Paper Pumpkin Kit Stampin’ Up)
  • Scrap piece of Crumb Cake card stock (Stampin’ Up)
  • Fall for Toile stamp set (September 2025 Paper Pumpkin Kit Stampin’ Up)
  • Cajan Craze ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From the Fall For Toile Paper Pumpkin Kit, find the white card base with the linen background and fold in half.  Find two of the trees with boarder pieces, a fox, two of the brown leaves, a Thankful label, a large white circle and a smaller tan circle. 

Adhere the tree with boarder to the center of the front of your card.  Then take the small tan circle and adhere the two brown leaves to the back and then adhere that to the center of the larger white circle.  Take the Thankful label and adhere to a scrap piece of crumb cake and trim a boarder around.  Adhere toward the bottom of your small tan circle and then adhere the fox to the top of your label looking like he is sitting on your label. 

For the inside, take the “Wishing you the happiest of days” greeting and stamp toward the top center of the inside of your card.  Then take your second tree with border piece and trim the tree out from the border (keeping the boarder to use for another card).  Adhere the tree to the center edge toward the bottom of the inside of your card. 

This is a great card for any man in your life to let them know how much they mean to you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Gathering Together Thankful For You Card

I just love the subtle colors of this card, it is light but still fall looking.  This card uses the Gathering Together suite from Stampin’ Up with these great Basic Beige papers to lighten everything. 

To create this card, you just need a few things:

  • Basic Beige card stock (Stampin’ Up)
  • White card stock
  • Gather Together designer series paper (September 2025 Online Exclusive Stampin’ Up)
  • Gather Moments stamp set and dies (September 2025 Online Exclusives Stampin’ Up)
  • Crushed Curry ink (Stampin’ Up)
  • Cinnamon Cider ink (retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

With a piece of Basic Beige card stock and cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  From white card stock cut two pieces to 4 1/8” x 5 3/8” and another to 2 7/8” x 3 7/8”.  From the Gathering Together designer series paper pack find the Basic Beige bark looking paper and cut a piece to 4” x 5 ¼” and then from the plaid paper and cut a piece to 2 ¾” x 3 ¾”. 

Adhere one of the 4 1/8” x 5 3/8” pieces of white paper to the front of your Basic Beige card base and then adhere to Basic Beige wood grain looking piece to that.  Then adhere the smaller white piece to the center of that and the Basic Beige plaid piece onto that. 

Take some scrap white paper and your Crushed Curry ink and stamp three leaves, with a mix of dark and light (stamped-off).  Then with your Cinnamon Cider ink stamp two acorns.  Use the dies to cut each of these out.  Adhere two leaves and an acorn to the lower left corner of the Basic Beige plaid paper on the front of your card. 

From another piece of scrap white paper stamp the “Thankful for you” greeting in Crushed Curry ink and use the arrow label die from Traditional Tags dies to cut it out with the arrow facing to the left.  Adhere to the upper portion of your plaid piece butted up to the right edge. 

For the inside of the card adhere your remaining piece of white card stock.  Adhere the leaf and acorn in the lower left corner.  For the greeting stamp the “Your friendship means the world to me” greeting in the upper center. 

Use this card to let a friend know you care and how much they mean to you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Fall For Toile Thankful Pumpkin Card

The Fall for Toile Paper Pumpkin kit is just so beautiful and has made some lovely cards.  This Thankful card with all the fall leaves just turned out so cute and was so quick and easy.

To create this card, you just need a few things:

  •  Fall for Toile Paper Pumpkin Kit (September 2025 Paper Pumpkin Stampin’ Up)
  • Darling Duckling card stock (2025-2027 In Color Stampin’ Up)
  • Fall for Toile stamp set (September 2025 Paper Pumpkin Stampin’ Up)
  • 2025-2027 In Color Flat Pearls
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From the Fall for Toile Paper Pumpkin kit take on of the brown checkered card bases and fold in half.  Then take two of the yellow and orange leaf pieces (one of each direction), four of the brown foil leaves, one of the white circles, the pumpkins and the Thankful greeting punch outs. 

Adhere your two yellow and orange leaf pieces to the back of the white circle piece and then space out your brown leaves and adhere as well.  Roll up the edges of your leaves so they stick up a bit.  Adhere this to the front center of your card base.  Adhere the pumpkin punch-out with pop dots to the lower half of your circle.  Take a scrap piece of Darling Duckling card stock and adhere the Thankful greeting piece and trim around to outline.  Adhere the greeting angled to the top portion of your white circle.  Take three of the 2025-2027 In Color Flat Pearl Timid Tiger pieces, one of each size and decorate around.

You now have a beautiful fall card to send you anyone to let them know you are thankful for them and all they do. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading