Cards, Papercrafting

Floral Charm Thank You Floral Strip Card

No Comments

This card made with strips of paper turned out cute.  It was made with the Floral Charm designer series paper from Stampin’ Up and the Charming day stamp set. 

To create this card, you just need a few things:

  • Mossy Meadow card stock (Stampin’ Up)
  • Timid Tiger card stock (2025-2027 In Color Stampin’ Up)
  • White card stock
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming day stamp set (July 2025 Online Exclusive Stamp in’ Up)
  • Two layered label dies
  • Mossy Meadow ink (Stampin’ Up)
  • Scissors
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

With the Mossy Meadow card stock cut your card base to 5 ½” x 8 ½” and fold in half.  Take your Timid Tiger card stock and cut two pieces to 4 1/8” x 5 3/8” and then 4 strips to 3/8” x 4”.  From white card stock cut an inside piece to 4” x 5 ¼”.  Take your Floral Charm designer series paper pack find the orange floral piece and cut 5 strips to 7/8” x 4”, keeping them in order. 

Take the Timid Tiger piece you cut to 4 1/8” x 5 3/8” and start adhering your strips.  Start with the top adhering your top piece just at the top so you can slide your strip under.  Fully adhere your bottom strip to the bottom of the Timid Tiger background.  Then work at adhering your orange dividing strips and your three center floral strips, sizing them as close to the same as possible. 

From a scrap piece of Mossy Meadow, cut the larger size laying label and from a scrap piece of white card stock cut the smaller label.  With your Mossy Meadow ink and the “Thanks for Being You” greeting stamp from the Charming Day stamp set, stamp on your white label toward the right side.  From a scrap piece of your floral paper cut out a floral section and adhere to the left side of your label, or you can stamp and color a flower and leaves to use (I am not the best at coloring so I rather fussy cut 😊).  Adhere you white label with pop dots to your Mossy Meadow label and then adhere them to the front of your card about 1/3 of the way from the top. 

For the inside of your card adhere your white card stock piece to the Timid Tiger piece and adhere to the inside of your card.  From the Charming Day stamp set find the “you made my day” greeting stamp and with your Mossy Meadow ink stamp in the upper portion of your card.  I had stamped and colored a flower for the front that I didn’t use so I used in on the inside, you could also fussy cut another.  The stamped flower was colored with Light Timid Tiger and Light Mossy Meadow Stampin’ Blends. 

This is a fairly neutral thank you card that could be given to most anyone to let them know you appreciate something they did to make your day brighter.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Moonlit Flora World A Better Place Card

No Comments

I am pretty infatuated with this new Moonlit Flora designer series paper from Stampin’ Up with the Fern and Flora stamps and dies.  This block card was the perfect design for this paper to showcase the white moth’s and flowers.  This lovely design came from my Stampin’ Up Upline and friend from her Facebook Live at MyStampinStyle.com. 

To create this card, you just need a few things:

  • Secret Sea card stock (2025-2027 In Color Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • Old Olive card stock (Stampin’ Up)
  • White card stock
  • Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
  • Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
  • Secret Sea ink (2025-2027 In Color Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

For you card base cut a piece of white card stock to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  From white card stock also cut a piece to 3 ¾” x 5”, two pieces to 1 7/8” x 3 1/8” and two to 1 7/8” x 1 7/8”.  Cut two pieces of Secret Sea card stock to 4” x 5 ¼”.  From the Moonlit Flora designer series paper find the paper that has the white flowers and cut two pieces that have the flowers on them to 1 ¾” x 3” and then the paper with the white moths cut two pieces to 1 ¾” x 1 ¾”. 

With the Mossy Meadow card stock cut out the large leaf die and the fern die and from the Old Olive card stock cut one of the fronds.  From some white card stock cut out a few of the dainty flowers.  Use the label die to cut out a label from the white card stock.  Use the “you make the world a better place” greeting stamp and stamp on the label in Secret Sea ink. 

With your white card base, adhere one of the Secret Sea pieces to the front.  Then adhere each of your flower and moth pieces to the white pieces and adhere each to the front of your card with the two long pieces in opposite corners and then the square pieces in the other opposite corners, choose the corners based on the paper.  Now trim the leaf down and adhere to the back left of the label, the frond and the fern (also trimmed down) to the front left of the label and then decorate with a few of the white flowers.  Adhere the label to the right side of your card front with pop dots. 

For the inside of the card adhere the second Secret Sea piece and then the white piece.  Cut one of the larger leaf dies out of Old Olive, trim down and adhere in the upper left corner.  Use your Secret Sea ink and the ‘thankful for you” greeting and stamp in the upper right section of the card next to the leaf piece.

Such a lovely thank you card for anyone that lets you say how much you appreciate them.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Delicate Dreams Scalloped Wishes Thanks Card

No Comments

I had some triangle pieces left from a different card I made so I came up with this design so that I could use them on this gate fold that opens in the middle.  It uses the blue floral paper from the Delicate Dreams designer series paper from Stampin’ Up and the Scalloped Wishes dies and stamps. 

To create this card, you just need a few things:

  • Hydrangea Hue card stock (2026-2028 In Color Stampin’ Up)
  • Pear Pizzaz card stock (retired Stamp’ Up)
  • White card stock
  • Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
  • Scalloped Wishes stamp set and dies (March 2026 Online Exclusive Stampin’ Up)
  • Hydrangea Hue ink (2026-2028 In Color Stampin’ Up)
  • Bordered Ribbon Hydrangea Hue (2026-2028 In Color Stampin Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

To cut your card base take a piece of white card stock and cut to 4 ¼” x 11” and score at 2 ¾” and 8 ¼”.  Cut another white piece to 3 ¾” x 5” for the inside of your card.  From the Hydrangea Hue card stock cut a piece to 2 7/8” x 2 7/8” and cut on the diagonal into to halves.  In your Delicate Dreams designer series paper pack find the blue and white floral piece and cut two pieces to 2 5/8” x 4 1/8” and a piece to 2 ¾” x 2 ¾” which you cut in half on the diagonal as well. 

From the Scalloped Wishes dies take a scrap piece of white card stock and cut the large plain label and dragonfly wings.  With some scrap Hydranea Hue card stock cut the larger scalloped designed label and four flowers (two sets of two), along with a dragonfly body.   Take a scrap of Pear Pizzaz card stock and cut out two of the longer leaf sprigs. 

Now we can assemble, starting with taking your white card base and folding each side in to meet at the center.  Take the two rectangle floral pieces and adhere one to each side of the front of your card.  Take your floral triangles and adhere to the Hydrangea Hue triangles and adhere one of each to the outside edge of your floral pieces. 

With the Hydrangea Hue label, adhere it to the larger white label.  Then adhere one of your leaf springs to the left side along with two of the flowers.  Grab your Hydrangea Hue ink and the “with sincere thanks” greeting from Scalloped Wishes and stamp to the right side.  With your Bordered Ribbon cut a piece and tie a bow and adhere to the upper right side of your label.  Adhere the left side of your label to the left side centered in your card front.  Adhere the dragonfly body to the front of wings and adhere the dragonfly to the upper right of your card, making sure it doesn’t interfere with your card label when opening the card. 

For the inside of your card take the 4” x 5 ¼” Hydrangea Hue paper and adhere the 3 ¾” x 5” white piece to it and adhere to the inside of your card.  Adhere the leaf spring and two remaining flowers in the lower left corner of the inside. 

What a lovely thank you card for a girlfriend or work mate who does something you should say thanks for. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Notes of Spring Notes of Thanks Card

No Comments

Such a cute deer in this Notes of Spring stamp set from Stampin’ Up and adding the little dragonfly from the Scalloped Wishes stamp set was the touch it needed.  The Wood Grain Wonders designer series paper made the perfect background. 

To create this card, you just need a few things:

  • Pecan Pie card stock (retired Stampin’ Up)
  • White card stock
  • Wood Grain Wonders designer series paper (March 2026 Online Exclusive Stampin’ Up)
  • Notes of Spring stamp set (March 2026 Product of the Month Stampin’ Up)
  • Scalloped Wishes stamps and dies (March 2026 Online Exclusive Stampin’ Up)
  • Pecan Pie or Baked Brown Sugar ink (retired Stampin’ Up)
  • Pear Pizzazz (retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From your white card stock cut a card base to 5 ½” x 8 ½” and fold in half.  Cut a piece to 2 ½” x 2 7/8” to stamp on and one to ¾” x 2” for your label.  From Peacan Pie card stock cut a piece to 4 ¼” x 5 ½”.  With your Wood Crain Wonders designer series paper pack, find the piece in Pecan Pie color and cut a piece to 4 1/8” x 5 3/8”.  Align one edge with both pieces and tear together to make a matching tear, repeat on each side giving you’re a small layer of the Pecan Pie layer. 

With the white piece measuring 2 ½” x 2 7/8” and stamp the large ground piece and then the small one next to it in Pecan Pie ink (or Baked Brown Sugar ink as I didn’t have Pecan Pie) to form the ground.  Stamp the large grass piece on the large ground piece and the small grass on the small ground.  Take the small dragonfly from the Scalloped Wishes and stamp one in the upper right corner above the small grass. 

On a scrap piece of white card stock stamp the deer outline in Pecan Pie ink and then with the fill-in stamp ink with your Pecan Pie ink and stamp off once and then stamp inside your deer outline.  Use a pair of scissors to cut out your deer.  On a small scrap of white stamp the small dragonfly in Pecan Pie ink and use the die to cut out.  Use the Pear Pizzazz ink to stamp the “A little note of thanks”greeting on your white label.  Adhere your dragonfly cutout to the upper left corner of your label with a half of a pop dot. 

Adhere your two torn pieces together and then to the front of your card base.  Adhere your stamped white piece to the upper portion of the Wood Grain paper on the front of your card.  Use pop dots to adhere the deer over the ground stamps with the grasses showing.  Adhere the label to the lower right side. 

For the inside I didn’t put a greeting as I was just leaving it as a note, but I did stamp another of the small dragonfly in the upper left corner and a deer in the lower left corner using the same technique of stamping the outline and stamping off the fill-in.

That little deer is so cute and made a pretty thank you card for anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Delicate Dreams Thank You Card

No Comments

This Thank You card made with the Delicate Dreams designer series paper and the Delicate Whispers stamps and dies from Stampin’ Up made a beautiful card.  The colors all blends nicely and the linen paper is perfect for a background. 

To create this card, you just need a few things:

  • Crumb Cake card stock (Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • Cajan Craze card stock (Stampin’ Up)
  • White card stock
  • Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
  • Delicate Whispers stamp set and dies (March 2026 Online Exlcusive Stampin’ Up)
  • 2 ¾” Circle Die (retired Stampin’ Up)
  • Natural Matte Dots (March 2026 Online Exclusive Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Scoring Board or scoring blade for paper trimmer
  • Paper trimmer
  • Adhesive of choice

From your Crumb Cake card stock cut a card base to 5 ½” x 7 ¼”, score at 3” and fold.  With your white card stock cut a piece to 4 1/8” x 5 3/8” and another to 2 7/8” x 5 3/8”.  Then cut a 2 ¾” circle from white card stock as well.  From the Delicate Dreams designer series paper find the smaller floral piece and cut a piece to 1” x 5 ¼”.

From the Delicate Whispers dies cut two of the fronds from Cajan Craze, two of the twigs out of Crumb Cake and one of the curved to the right leaves from Mossy Meadow.  Use the flower die to cut out one of the Crumb Cake colored flowers from the same Delicate Dreams floral paper.  Adhere the Mossy Meadow leaves to the left side of the white circle and then adhere the other pieces over the top of that with the flower covering the bottom where they all join.  With Mossy Meadow ink and the “Thank you kindly” greeting from the Delicate Whispers stamp set stamp to the right side of the white circle. 

Now adhere the large white piece to the inside back of your card and the floral 1” piece to the right side of the white, leaving a small equal boarder with card front closed.  Now adhere the other piece of white to the front of your card and the linen designer series paper piece you cut to the front of that.  Adhere your circle about 1” from the top of your card, centered in the middle with the card front closed, overhanging the front.  Add three of the Natural Matte Dots in Crumb Cake around on the open space on the white circle. 

On the inside of the card stamp the “you’re the nicest” greeting from Honeybee Home stamp set in the upper center of the white piece on the inside of your card. 

What a cute thank you card for anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Delicate Dreams Thanks for Being You Card

No Comments

The Delicate Dreams floral designer series papers from Stampin’ Up are so pretty and cheerful.  This is a really plain and simple card but turned out just like I had it in my head, which doesn’t happen most of the time.  I really liked the darkness of the Secret Sea paper and the Gray Granite to pull the colors from this floral paper. 

To create this card, you just need a few things:

  • Secret Sea card stock (2025-27 In Color Stampin’ Up)
  • Gray Granite card stock (Stampin’ Up)
  • Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
  • Delicate Whisters stamp set (March 2026 Online Exclusive Stampin’ Up)
  • Charming Day stamp set (July 2025 Online Exclusive Stampin’ Up)
  • Circle Dies
  • Secret Sea ink (2025-27 In Color Stampin’ Up)
  • Variegated Trim ribbon (March 2026 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From your Secret Sea card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut a piece of Gray Granite for the inside to 4” x 5 ¼”.  With your Delicate Dreams designer series paper find the piece of Gray Granite and the floral paper that has the Gray Granite flowers.  From the Gray Granite dsp paper cut a piece to 4” x 5 ¼” and from the floral piece cut it to 3 7/8” x 5 1/8”.  With a scrap piece of Secret Sea use a circle die about 2 ¾” and cut one.  With the Gray Granite dsp or a scrap piece of Gray Granite card stock use the 2 3/8” circle die to cut out one. 

Take the two circles you cut and adhere together.  Take the “Thanks for being you” stamp from the Charming Day stamp set and Secret Sea ink and stamp evenly in an upper portion so you can trim the left and bottom. 

Adhere your floral piece of paper to the Gray Granite dsp paper.  Adhere a piece of the Variegated Trim ribbon about ¾” up from the bottom and adhere on the back of each side.  Adhere your circle in the lower left corner and trim off the overhanging portion at the left side and bottom.  Now adhere this to the front of your card base. 

Take the Gray Granite piece of card stock you cut and stamp the “you made my day” greeting and your Secret Sea in and stamp in the upper center.  Then use the floral sprig stamp going to the right and with your Secret Sea ink and stamp in the lower left corner.  Adhere to the inside of the card. 

What a pretty simple floral card to thank someone for doing something special for you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Delicate Dreams Thank You Kindly Card

No Comments

I love the tan and blue color combinations of this new Delicate Dreams designer series paper from Stampin’ Up.  The florals are all pretty and then this linen paper is a great background.  The Delicate Whispers stamps and dies offer a lot of great foliage and floral options to add to the cards as well. 

To create this card, you just need a few things:

  • Crumb Cake card stock (Stampin’ Up)
  • White card stock
  • Delicate Dreams designer series paper (March 2026 Online Exclusive Stampin’ Up)
  • Delicate Whisters stamp set and dies (March 2025 Online Exclusive Stampin’ Up)
  • Stitched Hexagon dies (Retired Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From you Crumb Cake card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  From you white card stock cut a piece for the inside 4” x 5 ¼”.  Take the Delicate Dreams designer series paper pack and find the Mossy Meadow piece, the Crumb Cake linen piece and the floral with the smaller flowers.  From the Mossy Meadow piece (or you can use Mossy Meadow card stock if you prefer) cut two pieces to 4 1/8” x 5 3/8” and another to 3 1/8” x 4 3/8”.  From the Crumb Cake linen paper cut a piece to 4” x 5 ¼”.  The with the floral piece cut one to 3” x 4 ¼”. 

Grab your Stitched Hexagon dies and find the one that measures 1 ½” and the next one up that measures 1 ¾’ wide.  From scrap white card stock cut the 1 ½” label and from your Mossy Meadow paper cut one of the 1 ¾” wide ones.  Adhere them together.  Then cut one of the angled ends off to make your label.  Use the Mossy Meadow ink and the “Thank you kindly” greeting stamp from the Delicate Whispers stamp set and stamp to the right side of your label, pointed end, with the top of the stamp lining up with the point. 

Take a scrap piece of the floral paper and the small flower and leaves die and cut out two of the crumb cake flowers from the paper, or you can stamp and color your own.  Take one of the flower you cut out and adhere to the left side of your label. 

Now lets get the card put together.  Start with adhering your linen piece to one of the two larger Mossy Meadow pieces and then adhere that to the front of your card base.  Then adhere the floral piece to the smaller Mossy Meadow piece and adhere that in the center of your linen paper leaving about ½” on all four sides.  Now adhere you label in the lower left portion of your card over the floral paper and lining up on the outside Mossy Meadow edge. 

For the inside of the card adhere your second large Mossy Meadow paper to the inside and then the white card stock piece on top of that.  Now adhere the second cut out flower in the lower left corner of the white card stock.  If you would like to stamp a greeting on the inside feel free to do so, I didn’t as my friend has asked for some thank you cards that don’t have inside greetings and this is for her.

What a lovely card, I love these color combinations, and a great thank you card for anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

True Blue Floral Kindness Card

No Comments

I love the symmetry of this card and the color blends with the True Blue Floral designer series paper from Stampin’ Up.  I used the Mixed Labels stamps and dies to finish it off. 

To create this card, you just need a few things:

  • Balmy Blue card stock (Stampin’ Up)
  • Night of Navy card stock (Stampin’ Up)
  • White card stock
  • True Blue Floral designer series paper (December 2025 Product of the Month Stampin’ Up)
  • Mixed Labels stamp set and dies (Stampin’ Up)
  • Night of Navy ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From a piece of Balmy Blue card stock cut a card base t 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  With your Night of Navy card stock cut two pieces to 4 1/8” x 5 3/8” and one to 3 1/8” x 3 1/8”.  Take the True Blue Floral designer series paper pack and find the large floral piece with the Balmy Blue background, and the white and navy leaves with Balmy Blue background.  From the large floral piece cut a piece to 4” x 5 ¼” and a second to 1 ½” x 4” and from the leaf paper cut a piece to 3” x 3”. 

Adhere your 3” x 3” leaf paper onto the 3 1/8” x 3 1/8” Night of Navy piece and then cut diagonally (watching direction of your paper) into two triangles.  Adhere one of your 4 1/8” x 5 3/8” pieces to the front of your card base and then the large rose piece to the front of that.  Now adhere each triangle along the outside right and left edges, centered from top to bottom, the tips will cross slightly in the middle. 

With the “your kindness made my day” greeting from the Mixed Labels stamps and stamp on a piece of scrap white card stock in Night of Navy ink.  Use the larger size label die with the decorative edge to cut out your stamped greeting.  Adhere to the front center with pop dots to raise up slightly. 

For the inside adhere your last piece of Night of Navy paper and then the white piece of card stock.  Adhere the large floral strip to your white inside piece leaving about 1/8” of white showing to the left side.  Then take the “thank you” greeting from the Mixed Labels stamps and stamp centered on the upper white area in Night of Navy ink. 

What an adorable way to say thank you to someone for their kindness.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Big Thanks Floral 12 Days of Crafting Advent Calendar Card

No Comments

This simple but beautiful thank you card made with the paper from Day 2 of the 12 Days of Crafting Advent Calendar set is perfect for anyone you need to give a big thank you to.  The stamp set has a great group of stamps with a bunch of sayings and also a set of flowers, birthday and generic stamps. 

To create this card, you just need a few things:

  • Secret Sea card stock (2025-2027 In Color Stampin’ Up)
  • White card stock
  • 12 Days of Crafting Advent Calendar (Day 2) designer series paper (2025 Stampin’ Up)
  • 12 Days of Crafting Advent Calendar Advent Calendar stamp set (2025 Stampin’ Up)
  • Secret Sea ink (2025-2027 In Color Stampin’ Up)
  • Secret Sea Faux Linen Ribbon (2025-2027 In Color Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From Secret Sea card stock cut a card base to 5 ½”x 8 ½” and fold in half to 4 ¼” x 5 ½”.  With white card stock cut a piece to 4” x 5 ¼” for the inside of your card and 2” x 4”.  Find the floral piece in the 12 Days of Crafting Advent Calendar Day 2 designer series paper and cut to 4” x 4”. 

Take your 2” x 4” piece of white card stock and the “Big Thanks” greeting from the 12 Days of Crafting Advent Calendar stamp set and stamp toward the right side centered. 

Put adhesive along the top front of your white piece and then add adhesive to the back bottom of the floral piece, lay on your Secret Sea card base and adhere together to fit your card front, forming a piece measuring 4” x 5 ¼”.  Wrap a piece of ribbon where the paper meets and adhere to the back.  Now adhere to the front of your card base.  Adhere your inside white piece to the inside of your card base.  If you would like to stamp a greeting on the inside do so, my friend has requested some thank you cards with no inside greeting so I am not doing anything on the inside of this greeting. 

What a simple and quick card to make to thank anyone.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Painterly Pears Golden Pears Thank You Card

No Comments

This lovely Painterly Pears thank you card is just so lovely with the glittery colored pears to make them shine.  It uses the Painterly Pears suite from Stampin’ Up.

To create this card, you just need a few things:

  • Mossy Meadow card stock (Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Painterly Pears designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Perfectly Pears stamp set (July 2025 Online Exclusive Stampin’ Up)
  • Traditional Label Dies (August 2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow and Gold Trim Ribbon (July 2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Wink of Stella Glitter Brush (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

With a piece of Mossy Meadow card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  For the inside of your card cut a piece of Basic Beige card stock to 4” x 5 ¼”.  Then from your Painterly Pears designer series paper pack find the Basic Beige piece with the golden pears and cut a piece to 4” x 5 ¼” and then also fussy cut out one pear to decorate the inside of your card.  Take your piece of pear paper and color each of the pears with your Wink of Stella glitter pen to give them a nice shine. 

From the Mossy Meadow and Gold Trim ribbon cut a piece to 4” and another to 7 ½”.  Take the 4” piece and fold in half and adhere both ends about ½” apart about 1 “ up from the bottom of the paper.  Then feed the other piece through and fold in half as well have adhere to the back on the other side about ½” apart and up 1” from the bottom of your paper.  Then adhere this to the front of your card base. 

From a scrap piece of Basic Beige cut one of the oval shape smaller labels from the Traditional Label die set and then stamp a “Thank You” greeting from the Perfectly Pears stamp set.  Then cut the next size up from a scrap piece of Mossy meadow and adhere together.  Use pop dot and adhere your label over the ribbon to the right side on the front for your card. 

For the inside of your card adhere your Basic Beige piece.  From the Paper Tags stamp set find the “You are so very kind” stamp and stamp on the inside upper center in Mossy Meadow ink.  Adhere your cut out pear to the lower left corner and color your pear with some Wink of Stella for a bit of a shimmer. 

This glittery pear card is perfect to tell someone thank you for being so kind.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading