Wildflower Birthday Level-Up Card

This Wildflower Birthday set is such a girly and pretty set of paper, I am just obsessed.  It comes with two sheets of cut-out shapes as well, which I didn’t use for this card but have on others. 

To create this card, you just need a few things:

  • Wildflower Birthday specialty designer series paper
  • Mixed Labels stamp set and dies
  • Pretty in Pink card stock
  • White card stock
  • Pool Party ink
  • Scoring board or scoring blade for paper trimmer
  • Paper trimmer
  • Adhesive of choice
  • Pop-Dots

With the Pretty in Pink card stock cut a card base of 4 ¼” x 11” and score to 1 ¾”, 3 1/8”, 3 ½”, 7 ½”, 7 7/8” and 9 ¼”.  The center four scores fold up and the two outside pieces fold out. 

Grab a piece of White card stock and cut a piece to 3 ¾” x 4”, one to 1 ½” x 4”, 7/8” x 5 ½” and one to 3” x 3 ¾”.  Now grab the Wildflower Birthday specialty designer series paper and cut a piece of the pink and white gingham paper to 3 ½” x 3 ¾” and two strips to 1 ¼” x 3 ¾”.  The find the paper with the cakes and cut a strip of cakes to 1” wide making sure you are lining up to center the cakes and then cut to a length of 3 ½”, but making sure you are getting your cakes close to the top as the bottom area will get covered.  Then with the Pool Party banner piece cut a strip to 5/8” x 5 ¼” which should give you three banner stripes, and then another piece for the back of the card measuring 5/8” x 3 ¾”. 

Take a scrap piece of White card stock and your Pool Party ink and stamp the “You’re Pretty Wonderful” and then use the label die to cut it out. 

Now it is time to assemble it all together.  Take your Pretty in Pink card base and your 3 ¾” x 4” White cards stock piece and the pink gingham measuring 3 ½” x 3 ¾” and adhere the gingham onto the white.  Then adhere the white to the center of the card base.  Grab the label and adhere with pop dots to the upper center of the card center.  Take your two white strips measuring 1 ½” x 4”, the two pink gingham strips and the two cake strips and adhere the cake strips to the pink gingham and the pink gingham to the white strips and then adhere each of those to the front ends.  Now take the white strip measuring 7/8” x 5 ½” and the Pool Party strip measuring 5/8” x 5 ¼” and adhere to the white strip.  Then adhere that strip to the bottom of each end of the card flaps. 

Now take the last piece of white measuring 3” x 3 ¾” and adhere in the center of the back of the card.  Then adhere the Pool Party banner strip toward the bottom of the white piece.  You can add an additional greeting here in Pool Party ink if you choose to. 

This adorable card is ready to give to a good friend or sister or whoever else would enjoy receiving this cute card. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Wildflower Birthday Pull Tab Pop-Up Card

This fun pull tab pop-up card made from Wildflower Birthday specialty designer series paper is just beautiful. 

To create this card, you just need a few things:

  • Pretty in Pink card stock
  • White card stock
  • Wildflower Birthday specialty designer series paper
  • Flirty Flamingo ink (should be Pretty in Pink ink but I didn’t have that one)
  • Scoring board or scoring blade for paper trimmer
  • Paper trimmer
  • Bone folder
  • Adhesive of choice

Take a piece of Pretty in Pink card stock and cut a card base to 4 ¼” x 5 ½”.  With your White card stock cut a piece to 4” x 10 ½” and score at 1 ¾”, 3 ½”, 7” and 8 ¾”.  Cut another piece of White card stock to 4” x 4” and score it at ¼” and 3 ¾”.  Cut two strips with the White card stock to 1/2” x 3 ¼” scored at 1 ¼”.  From your Wildflower Birthday Specialty designer series paper find the light green with the white oval decoration paper and cut a piece to 3 3/8” x 3 7/8”

Take the 4” x 10 ½” and from the middle fold each side down and then fold the ends out.  Use a bone folder to press the folds flat.  Take the green piece of paper you cut and adhere to the front of the pop-up middle.  Grab your hexagon die and cut out a window in the center and save the cut-out piece for making the inside section. 

Grab the 4” x 4” scored piece and fold each side up from the center.  Put adhesive on the outside of one of the ¼” folded up sides and an adhere to the inside of one of the scored pop-up piece.  Put adhesive on the outside of the other ¼” flap and adhere to the inside of other pop-up side, forming the shape below.  Put adhesive on the green paper you saved from the center cut-out, fold the center down to the other center section to line up and adhere the cut-out piece to the bottom through the cut-out. 

Use the cake piece and small floral cut-out from the Wildflower Birthday specialty designer series paper and adhere the cake piece to the center of the green piece and adhere the floral piece on the lower left part of the cake.  Take the pink balloon and a medium floral piece and adhere to the top part of the card around the cut-out.  Adhere two of the cut-out cupcakes  to the right and left pull out sides of the center cut-out section. 

Take your pink ink and a “Happy Birthday” stamp of choice and fits well in the center of the cut-out window.  Close in the sides and fold the card down to you have the white window covering the cake piece.  Stamp the “Happy Birthday in the middle of your window.  Take the gold banner piece from the cut-outs and cut in half, cut down to size for each size and align on each side with the banner aligning in the middle.

Take the two ½” x 3 ¼” strips and put adhesive on the 1 ¼” section and adhere to the bottom section of the right pull-out and the same on the left.  Take two of the small pink florets and adhere to the ends of the pull-out stripes. 

On the back center section put adhesive and adhere to the center of the pink card stock base.  Decorate with a leaf and two flowers from the cut-out pieces.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Wildflower Birthday Cake Cut-Out Card


This adorable card is so easy to make and hardly even requires stamping, it is mainly using the cut-outs that come with the Wildflower Birthday Designer Series Paper pack from Stampin’ Up’s January-April 2025 Mini catalog.  It comes with the normal double-sided paper and then two sheets to cut-outs as well. 

To create this card you just need a few things:

  • White card stock
  • Peach Pie card stock
  • Wildflower Birthday Designer Series Paper pack
  • Peach Pie ink pad
  • Paper trimmer
  • Adhesive of choice
  • Pop-Dots

To start cut your Peach Pie card stock into 4 ¼” x 11” and fold in half to 4 ¼” x 5 ½”.  Then cut another piece of the Peach Pie card stock to 2 ¾” x 4 ¼”.  Now take your piece of white card stock and cut two pieces to 4” x 5 ¼” and another to 2 ½” x 4”.  The last is to take a piece of the Peach Pie Daisy paper from your Wildflower Birthday Designer Series Paper pack and cut a piece 3 ¾” x 5”.  That takes care of all the cutting.

Let’s build our layers for the front of the card.  Take your card base and adhere one of the 4” x 5 ¼” pieces of white card stock to the front of the card.  Then adhere your Peach Pie Daisy piece of card stock onto the white.  Add the 2 ¾” x 4 ¼” piece of Peach Pie card stock and then lastly the 2 ½” x 4” white piece of card stock.  From the Wildflower Birthday pack take the larger peach cake cut-out from one of your pieces, along with one of the very small flower groupings and one of the cupcakes, I used the one with the peach paper and teal frosting. 

First, take the small flower cut-out and adhere it to the cake base for decoration, then take the cake cut-out and add Pop-Dots to the back of the cake and adhere it to the center of the top white piece of card stock to finish the front of your card.


Take the last piece of white card stock for the inside of your card and adhere the cupcake to the lower right corner.  For the inside greeting I used the Delightful Wishes stamp and die set where I took my Peach Pie ink and stamped “wishing” onto a piece of white card stock and then took the wishing die and cut out my stamped wishing.  I adhered that to the top of the white card stock inside piece.  Finally, I stamped “you a happy birthday” under the wishing die cut greeting.  Now adhere your white inside piece to the inside of your card.

Wasn’t that easy and quick, and it is such a cute card. 

If you are interested in seeing other card ideas please visit my blog at www.daisychainfun.com.  Also ,if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All photos taken by DaisyChainFun.

Continue Reading