Cards, Papercrafting

Floral Z-Fold Lace Cards

No Comments

These cards are a Z-Fold style card, but the design makes a full-front card.  These cards were made with some floral paper that I don’t know what they are from and then use a border lace punch from Stampin’ Up to decorate the front edge. 

To create this card, you just need a few things:

Blue Rose Card

  • Marina Mist card stock (Retired Stampin’ Up)
  • Very Vanilla card stock (Retired Stampin’ Up)
  • Floral designer series paper (Unknown)
  • Gallery Blooms stamp set and dies (Stampin’ Up)
  • Words of Beauty stamps and dies (November 2025 Online Exclusive Stampin’ Up)
  • Marina Mist ink (Retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

Rust Butterfly Card

  • Ridinghood Red card stock (Retired Stampin’ Up)
  • White card stock
  • Floral designer series paper (Unknown)
  • Sentimental Park stamp set (Retired Stampin’ Up)
  • Double Layer Butterfly die (Spellbinders ?)
  • Ridinghood Red ink (Retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

To make a similar card, since I don’t know where the floral paper came from, cut a card base to 5 ½” x 8 ½” and score at 1 ½” x 4 ¼”.  Fold in half and then fold the small portion toward you.  From your neutral color (white or vanilla) cut a piece for the inside of your card to 4” x 5 ¼”, a piece for the front to 2 ¾” x 5 ¼” and for the middle inside panel cut a piece to 2 ½” x 5 ¼”.  For the lace piece cut a piece to 2” x 5 ½” and then use the lace punch (or a decorative border die if you have one) to cut the border edge.  Adhere this to the back of the front flap, you may need to trim off a bit to have it line up where you would like for it to show well. 

From your floral paper cut a piece for the front to 2 5/8” x 5”, a piece for your inside panel to 2 1/8” x 5” and a piece for the middle panel to 1 1/8” x 5”.  Take your neutral piece measuring 2 ¾” x 5 ¼” piece and the 2 5/8” x 5” floral piece and adhere the floral piece to it and then adhere the left side of the neutral piece to the front flap.  Use the 2 1/8” x 5” floral piece to the 4” x 5 ¼” piece (to either side, use your preference as I did one of each) and then adhere this to the back panel of the inside of your card.  Then adhere the last floral piece to the neutral piece and adhere that to the middle panel on the inside. 

Use a decorative stamp and\or die to decorate the front and use a greeting stamp and label to go with it on the front.  Stamp a greeting on the inside back panel of the card if you wish. 

This gives you a really nice card design to use for any type of card you prefer. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty You’ve Been On My Mind Card

No Comments

The elegance of this Brushed with Beauty designer series paper from Stampin’ Up is so pretty, and the paper I used for this card shows it all.  The Words of Beauty set that goes with is has a great number of greetings as well. 

To create this card, you just need a few things:

  • Calypso Coral card stock (Stampin’ Up)
  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Brushed With Beauty designer series paper (November 2025 Online Exclusive Stampin’ Up)
  • Words of Beauty stamp set (November 2025 Online Exclusive Stampin’ Up)
  • Petals of Beauty dies (November 2025 Online Exclusive Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

For your card base take the Calypso Coral card stock and cut to 5 ½” x 8 ½” and fold in half.  Then cut a piece to 4” x 4” and another to 1 1/8” x 4”.  From the Petal Pink card stock cut two pieces to 4 1/8” x 5 3/8, a piece to 3 7/8” x 3 7/8” and one more to 1” x 3 7/8”.  With the white card stock cut a piece to 4” x 5 ¼” for the inside. 

Take the Brushed With Beauty designer series paper pack and find the large floral piece and cut to 3 ¾” x 3 ¾”, making sure to not have the tan edge included.  From a scrap piece of Calypso Coral and the large outside floral die cut two flowers. 

For the front of your card take one of the 4 1/8” x 5 3/8” pieces of Petal Pink and adhere to the front of your card.  Adhere the floral piece to the square Petal Pink piece and then to the square Calypso Coral piece and adhere to the upper portion of your card center on three sides. Take the 1” x 3 7/8” piece of Petal Pink and adhere to the 1 1/8” x 4” piece of Calypso Coral and adhere to the lower portion of your card centering on all four sides.  Adhere one of the flowers you cut out and adhere to the left side.  Use the “You’ve been on my mind” greeting from the Words of Beauty stamp set and stamp centered in the remaining portion in Calypso Coral ink. 

For the inside of the card adhere the white piece you cut to the other piece of Petal Pink and adhere to the inside of your card.  Adhere the other flower you cut in the lower left corner.

This gives you a beautiful card to give to someone who could use a little pick-me-up.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty Floral Book Card

No Comments

I love the simplicity of this book style card made with the Brushed with Beauty designer series paper from Stampin’ Up and using the Words of Beauty stamp set and dies.  The papers do all the talking with this set. 

To create this card, you just need a few things:

  • Calypso Coral card stock (Stampin’ Up)
  • Very Vanilla card stock (Stampin’ Up)
  • Brushed with Beauty designer series paper (Stampin’ Up)
  • Words of Beauty stamp set and dies (Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Scoring board or scoring blade from trimmer
  • Paper trimmer
  • Adhesive of choice

From the Calypso Coral card stock cut a card base to 4 ¼” x 11” and score at 4 ¼” and 5 ½”.  From your Very Vanilla card stock cut two pieces to 4 1/8” x 4 1/8” and another to 1 1/8” x 4 1/8”. 

Take your Brushed with Beauty designer series paper pack and find the smaller floral piece and the Calypso Coral painted looking piece.  From the floral piece cut a piece to 4” x 4” and from the pointed Calypso Coral piece cut one to 1” x 4”.

With your card base, fold it in half and then adhere the short section to the back of the card.  Take one of the Very Vanilla square pieces and adhere it to the larger part of the front of your card, and the smaller Very Vanilla piece and adhere it to the smaller section.  Adhere the piece of painted Calypso Coral paper to the Very Vanilla small piece and the floral piece to the larger section.

Take a piece of scrap Very Vanilla paper and from the Words of Beauty stamp set find the “It’s your Birthday!” greeting and stamp in Calypso Coral ink.  Use the larger long label die from the Words of Beauty dies to cut out your greeting and then adhere it to the middle of your larger front floral piece. 

Use another birthday greeting for the inside of your card, I used “Someone like you should be celebrated every day”.  Stamp it in Calypso coral in on the piece of Very Vanilla card stock and then adhere that to the inside of your card.

This is a nice card to give to anyone special for their birthday.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty Floral Strip Card

No Comments

This is an easy way to use some pretty paper but giving it a little more character that highlights this beautiful floral paper from the Brushed With Beauty designer series paper from Stampin’ Up. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Brushed With Beauty designer series paper (Stampin’ Up)
  • Words of Beauty stamp set and dies (Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From a piece of Petal Pink card stock cut a card base to 5 ½” x 8 ½” and fold I half to form your card.  Then cut another piece to 3 3/8” x 5”.  With white card stock cut a piece to 4 1/8” x 5 3/8” and another to 4” x 5 ¼” and a third to 3 ½” x 5 1/8”. 

Take your Brushed With Beauty designer series paper pack and find the large floral piece and cut a piece to 3 ¼” x 4 ½” and then cut your pieces starting at the left side to ½”, ¾”, ½”, 1”, ½”, ¾” with a ½” piece left.  Now take your piece of Petal Pink you cut to 3 3/8” x 5” and starting at the left side adhere in the order you cut leaving 1/8” between each section.  Then adhere that piece to the white piece you cut to 3 ½” x 5 1/8”.   From the Brushed With Beauty designer series paper find the Petal Pink brushed paper and cut a piece to 4” x 5 ¼” and adhere that to the white piece you cut to 4 1/8” x 5 3/8”, then adhere that to the front of your card.  Now adhere to large floral layered piece to the front of your card centered on all sides. 

From a scrap piece of white card stock take the “It’s your birthday!” greeting stamp from the Words of Beauty stamp set and stamp in Calypso Coral ink.  Then use the larger long label die from the Words of Beauty dies and cut out.  Then cut another label from a scrap piece of Petal Pink card stock and cut it in half and adhere to the back of your white label with each end showing the Petal Pink about 1/8” on each end.  Now adhere that to the front of your card in the lower right corner of your floral paper. 

For the inside of your card, adhere the white piece left to the inside of your card.  Use a birthday greeting stamp, I used “I can’t think of a nicer person to celebrate” greeting stamp and stamp in Calypso Coral. 

Say Happy Birthday to someone special with this lovely card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty Dogwood Just Because Card

No Comments

I was so happy with how this card turned out, it is so plain but cute at the same time.  It was made with the lovely paper from the Brushed with Beauty designer series paper pack from Stampin’ Up and the Words of Beauty and Detailed Dogwood stamp sets. 

To create this card, you just need a few things:

  • Darling Duckling card stock (2025-2027 In Color Stampin’ Up)
  • Early Expresso card stock (Stampin’ Up)
  • White card stock
  • Brushed With Beauty designer series paper (November 2025 Online Exclusive Stampin’ Up)
  • Words of Beauty stamp set and dies (November 2025 Online Exclusive Stampin’ Up)
  • Detailed Dogwood stamp set (retired Stampin’ Up)
  • Early Expresso ink (Stampin’ Up)
  • Scoring board or scoring blade for trimmer
  • Paper trimmer
  • Adhesive of choice

Take a piece of Darling Duckling card stock and cut a card base to 4 ¼” x 8” and score at 1 ¼”, 2 ½”, 5 ½”, 6 ¾” and fold each side in from the center and the outer pieces out.  Cut another piece to 1 ¼” x 5 ½”.  From the Early Expresso card stock cut six pieces to 1 1/8” x 4 1/8”, two pieces to 2 7/8” x 4 1/8” and one more to 1 1/8” x 2 7/8”.  Use a piece of white card stock and cut to 2 ¾” x 4” for the back of your card and another piece to 1” x 2 ¾”.  From the Brushed With Beauty designer series paper pack find the Darling Duckling floral twig paper and cut six pieces to 1” x 4” and one to 2 ¾” x 4”. 

Adhere the Darling Ducking twig piece cut to 2 ¾” x 4” and adhere to one of the Early Expresso pieces and adhere that to the center of your card base.  Take the six pieces of Early Express and adhere the Darling Duckling twig pieces to each.  Adhere two of the to the sections next to the center piece. 

Take the other large piece of Early Expresso and adhere the white piece to it and then adhere it to the center back panel of your card.  Find the dogwood twig stamp from the Detailed Dogwood stamp set and stamp the upper portion of it in Early Expresso ink to the lower section of the white on the back panel of your card.  The use the “You’re a great friend” greeting stamp from the Words of Beauty stamp set and stamp that vertically to the left side of your back panel above the dogwood twig you stamped. 

Now take two more of your small Darling Duckling twig on Early Expresso pieces and adhere one to each back side panel.  Then take the 1 ¼” x 5 ½” strip of Darling Duckling and adhere one end to the left front panel about ¼” up from the bottom of the card and then the other side to the right-side front panel.  Grab the small white piece you cut and adhere to the Early Expresso piece.  Use the “You’ve been on my mind” greeting stamp and stamp in Early Expresso, then adhere to the front of your stripe.  Now take the last two Darling Duckling twig and Early Expresso pieces and adhere them to the front two panels. 

From some scrap Early Expresso cut out the Just and Because base pieces with from the Words of Beauty Dies, and from Darling Duckling scraps cut out the inner Just and Because with the dies.  Adhere each together and adhere to the front left panel of your card.

This makes a beautiful card to send to anyone to let them know you have been thinking of them.    I just smile every time I look at this card so I would assume it would give someone else the same pleasure.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed with Beauty Floral Birthday Card

No Comments

The florals in this new Brushed with Beauty designer series paper pack are lovely.  The colors of this beautiful birthday card went together so easily. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Brushed with Beauty designer series paper (November 2025 Online Exclusive Stampin’ Up)
  • Words of Beauty stamp set and dies (November 2025 Online Exclusive Stampin’ Up)
  • Baked Brown Sugar ink (retired Stampin’ Up)
  • Braided Trim (July 2025 Online Exclusive from the Floral Charm Suite Stampin’ Up)
  • Scissors
  • Paper trimmer
  • Adhesive of choice

Cut a card base from Petal Pink card stock to 5 ½” x 8 ½” and fold in half.  From the white card stock cut a piece to 4” x 5 ¼” for the inside of the card.  With the Brushed with Beauty designer series paper pack find the tan paper with ovals and the large floral piece.  From the large floral piece cut a piece to 4 1/8” x 4 ½” and use scissors to trim the bottom around the flowers and leaves.  From the tan piece with the cream ovals cut a piece to 2” x 4 1/8”.

Adhere the tan piece to the bottom of your card front and then the trimmed floral piece to the top half with the trimmed section overhanging the tan piece.  Trim a piece of braided trim to 4 1/8” and adhere about half-way down the card.    

From a scrap piece of white card stock stamp the “It’s your birthday!” greeting from the Words of Beauty in Baked Brown Sugar ink and cut out with the long label die from the Words of Beauty dies.  Adhere over the braided trim on the front of the card toward the left side.

For the inside of the card adhere the white piece of card stock to the inside and with the “Celebrate” greeting stamp and the Baked Brown Sugar ink stamp to the upper portion of the inside of your card. 

This is a beautiful birthday card to give any female in your life.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading