Cards, Papercrafting

Framed Florets Bi-Fold Card

No Comments

This bi-fold card made with Fitting Florets designer series paper from Stampin’ Up turned out really cute.  I actually had two pre-cut and scored stepper card cut but didn’t want to make two so I used it to make this bi-fold card.  It used the Framed Florets stamps and dies as well. 

To create this card, you just need a few things:

  • Night of Navy card stock (Stampin’ Up)
  • Balmy Blue card stock (Stampin’ Up)
  • White card stock
  • Fitting Florets designer series paper (Retired Stampin’ Up)
  • Framed Florets stamp set and dies (Retired Stampin’ Up)
  • Pre-cut label (unknown Stampin’ Up)
  • Night of Navy ink (Stampin’ Up)
  • Strawberry Slush and Pretty in Pink Gems
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From a piece of Night of Navy card stock, cut a card base to 5 ½ x 6 ½ and fold in half to 3 ¼” x 5 ½”.  Cut another piece to 3” x 6 ½” and fold in half to 3” x 3 ¼”.  From the Balmy Blue card stock cut a piece to 2 7/8” x 3 1/8” and another to 3 1/8” x 5 1/8”.  With a piece of white card stock cut a piece for the inside to 2 7/8” x 3 1/8”. 

Grab your Fitting Florets designer series paper pack and find the piece of Night of Navy with the Balmy Blue sprigs and pink berries.  Cut a piece to 2 ¾” x 3” and two pieces to 3” x 5 ¼” (there is a bit of a direction to this paper so you may want to pay attention).  Also find the piece that has the large floral groups on it and find the pink set and cut out with the die. 

Take the card base measuring 3 ¼” x 5 ½” and adhere one of the larger pieces of Balmy Blue to the front and then one of the larger pieces of the designer series paper.  Do the same for the inside back.  Then take your Night of Navy piece that you folded to 3” x 3 ¼” and adhere the Balmy Blue to the front and then the designer series paper piece, and adhere the white piece to the back of the inside. 

Take your small folded piece and put glue on 2” of the back and adhere to the inside of your larger piece in the center leaving 1” hanging off and 1” from the inside edge, making your card measure 4 ¼” x 5 ½”. 

Now take the pre-cut label (or any other label that works) and stamp the “Celebrate!” greeting angled on your label in Night of Navy ink and adhere with pop dots toward the upper left corner of your small front section.  Adhere the flower you die cut with po dots to the lower right corner, over the lower part of your label.  Add a few of the Strawberry Slush and Pretty In Pink Gems to decorate. 

For the inside stamp the “Wishes for a beautiful birthday” greeting in Night of Navy ink. 

There is an adorable birthday card for anyone in your life.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty Floral Book Card

No Comments

I love the simplicity of this book style card made with the Brushed with Beauty designer series paper from Stampin’ Up and using the Words of Beauty stamp set and dies.  The papers do all the talking with this set. 

To create this card, you just need a few things:

  • Calypso Coral card stock (Stampin’ Up)
  • Very Vanilla card stock (Stampin’ Up)
  • Brushed with Beauty designer series paper (Stampin’ Up)
  • Words of Beauty stamp set and dies (Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Scoring board or scoring blade from trimmer
  • Paper trimmer
  • Adhesive of choice

From the Calypso Coral card stock cut a card base to 4 ¼” x 11” and score at 4 ¼” and 5 ½”.  From your Very Vanilla card stock cut two pieces to 4 1/8” x 4 1/8” and another to 1 1/8” x 4 1/8”. 

Take your Brushed with Beauty designer series paper pack and find the smaller floral piece and the Calypso Coral painted looking piece.  From the floral piece cut a piece to 4” x 4” and from the pointed Calypso Coral piece cut one to 1” x 4”.

With your card base, fold it in half and then adhere the short section to the back of the card.  Take one of the Very Vanilla square pieces and adhere it to the larger part of the front of your card, and the smaller Very Vanilla piece and adhere it to the smaller section.  Adhere the piece of painted Calypso Coral paper to the Very Vanilla small piece and the floral piece to the larger section.

Take a piece of scrap Very Vanilla paper and from the Words of Beauty stamp set find the “It’s your Birthday!” greeting and stamp in Calypso Coral ink.  Use the larger long label die from the Words of Beauty dies to cut out your greeting and then adhere it to the middle of your larger front floral piece. 

Use another birthday greeting for the inside of your card, I used “Someone like you should be celebrated every day”.  Stamp it in Calypso coral in on the piece of Very Vanilla card stock and then adhere that to the inside of your card.

This is a nice card to give to anyone special for their birthday.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed With Beauty Floral Strip Card

No Comments

This is an easy way to use some pretty paper but giving it a little more character that highlights this beautiful floral paper from the Brushed With Beauty designer series paper from Stampin’ Up. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Brushed With Beauty designer series paper (Stampin’ Up)
  • Words of Beauty stamp set and dies (Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From a piece of Petal Pink card stock cut a card base to 5 ½” x 8 ½” and fold I half to form your card.  Then cut another piece to 3 3/8” x 5”.  With white card stock cut a piece to 4 1/8” x 5 3/8” and another to 4” x 5 ¼” and a third to 3 ½” x 5 1/8”. 

Take your Brushed With Beauty designer series paper pack and find the large floral piece and cut a piece to 3 ¼” x 4 ½” and then cut your pieces starting at the left side to ½”, ¾”, ½”, 1”, ½”, ¾” with a ½” piece left.  Now take your piece of Petal Pink you cut to 3 3/8” x 5” and starting at the left side adhere in the order you cut leaving 1/8” between each section.  Then adhere that piece to the white piece you cut to 3 ½” x 5 1/8”.   From the Brushed With Beauty designer series paper find the Petal Pink brushed paper and cut a piece to 4” x 5 ¼” and adhere that to the white piece you cut to 4 1/8” x 5 3/8”, then adhere that to the front of your card.  Now adhere to large floral layered piece to the front of your card centered on all sides. 

From a scrap piece of white card stock take the “It’s your birthday!” greeting stamp from the Words of Beauty stamp set and stamp in Calypso Coral ink.  Then use the larger long label die from the Words of Beauty dies and cut out.  Then cut another label from a scrap piece of Petal Pink card stock and cut it in half and adhere to the back of your white label with each end showing the Petal Pink about 1/8” on each end.  Now adhere that to the front of your card in the lower right corner of your floral paper. 

For the inside of your card, adhere the white piece left to the inside of your card.  Use a birthday greeting stamp, I used “I can’t think of a nicer person to celebrate” greeting stamp and stamp in Calypso Coral. 

Say Happy Birthday to someone special with this lovely card.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Brushed with Beauty Floral Birthday Card

No Comments

The florals in this new Brushed with Beauty designer series paper pack are lovely.  The colors of this beautiful birthday card went together so easily. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Brushed with Beauty designer series paper (November 2025 Online Exclusive Stampin’ Up)
  • Words of Beauty stamp set and dies (November 2025 Online Exclusive Stampin’ Up)
  • Baked Brown Sugar ink (retired Stampin’ Up)
  • Braided Trim (July 2025 Online Exclusive from the Floral Charm Suite Stampin’ Up)
  • Scissors
  • Paper trimmer
  • Adhesive of choice

Cut a card base from Petal Pink card stock to 5 ½” x 8 ½” and fold in half.  From the white card stock cut a piece to 4” x 5 ¼” for the inside of the card.  With the Brushed with Beauty designer series paper pack find the tan paper with ovals and the large floral piece.  From the large floral piece cut a piece to 4 1/8” x 4 ½” and use scissors to trim the bottom around the flowers and leaves.  From the tan piece with the cream ovals cut a piece to 2” x 4 1/8”.

Adhere the tan piece to the bottom of your card front and then the trimmed floral piece to the top half with the trimmed section overhanging the tan piece.  Trim a piece of braided trim to 4 1/8” and adhere about half-way down the card.    

From a scrap piece of white card stock stamp the “It’s your birthday!” greeting from the Words of Beauty in Baked Brown Sugar ink and cut out with the long label die from the Words of Beauty dies.  Adhere over the braided trim on the front of the card toward the left side.

For the inside of the card adhere the white piece of card stock to the inside and with the “Celebrate” greeting stamp and the Baked Brown Sugar ink stamp to the upper portion of the inside of your card. 

This is a beautiful birthday card to give any female in your life.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Rose Birthday Card

No Comments

This beautiful birthday card in these soft subtle colors made with the Floral Charm designer series paper is perfect for those females in your life. 

To create this card, you just need a few things:

  • Cinnamon Cider card stock (Retired Stampin’ Up)
  • Petal Pink card stock (Stampin’ Up)
  • White card stock
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamp and die set (July 2025 Online Exclusive Stampin’ Up)
  • Cinnamon Cider ink (Retired Stampin’ Up)
  • Subtle 3D Embossing Folder (Retired Stampin’ Up)
  • Charming Shimmer Faceted Dots (July 2025 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

Start with Cinnamon Cider card stock and cut your card base to 5 ½” x 8 ½” and fold in half.  Cut another piece to 3 ½” x 3 ½” and a strip to 7/8” 4 1/8”.  From a piece of Petal Pink card stock cut a piece to 4 1/8” x 5 3/8”, one to 4” x 5 ¼ for the inside of your card, a piece to 3 3/8” x 3 3/8” and a strip to ¾” x 4 1/8”.  With a piece of white card stock cut a piece for the inside of your card to 3 ¾” x 5”.  Then from the Floral Charm designer series paper pack find the rose piece and cut a piece to 3 ¼” x 3 ¼”. 

Take your piece of 4 1/8” x 5 3/8” Petal Pink piece you cut and use the Subtle 3D embossing folder to emboss then adhere to the front of your card base.  With the square Rose piece, adhere that to the square Petal Pink piece and then adhere that to the Cinnamon Cider square piece.  Now adhere that to the upper portion of your card evenly spaced on the sides and top. 

With your Charming Day stamp set get the “Happy Birthday” greeting stamp and Cinnamon Cider ink and stamp on your Petal Pink strip to the right side.  Adhere to your Cinnamon Cider strip and then adhere to the lower portion of your card centered in the open space.  Use three of the Charming Shimmer Faceted Dots lined in a row on the left side of your strip. 

For the inside of your card adhere your white card stock piece to the Petal Pink piece and adhere to the inside of your card.  With a birthday greeting stamp and your Cinnamon Cider ink, stamp your greeting in the upper center.  With a scrap piece of Petal Pink card stock cut out one of the roses from the die set and then with Mossy Meadow card stock cut out one of the leaf pieces.  Tear off a few of the leaves and adhere your rose and leaves in the lower left corner.

This is a great birthday card for anybody in your life who loves flowers or would love a feminine card like this.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Peaceful Garden Birds on a Branch Card

No Comments

This dainty floral-patterned paper from the Peaceful Garden designer series paper from Stampin’ up seemed like the perfect paper for this birds on a branch die.  I think it turned out adorable, loving it.    

To create this card, you just need a few things:

  • Secret Sea card stock (Stampin’ Up)
  • Wisteria Wonder card stock (retired Stampin’ UP)
  • White card stock
  • Peaceful Garden designer series paper (Stampin’ Up)
  • Birds on a Branch die (unknown)
  • Impressions Abloom dies (Stampin’ Up)
  • Birthday stamps (unknown)
  • Wisteria Wonder ink (retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

Take a piece of Secret Sea card stock and cut a card base to 5 ½” x 8 ½” and fold in half.  Cut another piece to 1” x 3”.  The dainty floral piece of designer series paper seemed more purple than Misty Moonlight and Cloud Cover so I used Wisteria Wonder, but you could use Cloud Cover as well.  From the Wisteria Wonder card stock cut two pieces to 4 1/8” x 5 3/8” and another to 7/8” x 2 7/8”.  From the white card stock cut a piece to 4” x 5 ¼” and another to ¾” x 2 ¾”.  Then from the Peaceful Garden designer series paper pack find the dainty floral piece and cut a piece to 4” x 5 ¼”. 

With one piece of the Wisteria Wonder adhere it to the front of your Secret Sea card stock and then adhere the dainty floral piece to that.  With a spare piece of Secret Sea cut two of the birds on a branch die, and then again with a spare piece of Wisteria Wonder.  Cut the birds off the one of the Wisteria Wonder pieces and adhere over one of the Secret Sea birds.  With the second piece of Secret Sea birds on a branch you cut, cut off the left end leaving 3 leaves to the front of the bird and then cut that bird off the second Wisteria Wonder birds and adhere to this branch.  Then with a spare piece of white card stock and the two small flowers dies from the Impressions Abloom dies and cut six white flowers.  Adhere five of the white flowers to the full birds on a branch set and the sixth flower on the small one. 

Adhere to full birds on a branch that you created to the front of your card.  Then with the ¾” x 2 ¾” white piece and a “Birthday Wishes” greeting stamp and Wisteria Wonder ink, stamp the greeting.  Adhere the white piece to the Wisteria Wonder piece and then to the Secret Sea piece and adhere to the lower right corner of your card.

For the inside of your card, stamp the “I can’t think of a nicer person to celebrate!” stamp with Wisteria Wonder ink toward the top center.  Adhere your smaller bird on a branch piece to the lower left corner.  Adhere this to the Wisteria Wonder and then to the inside of your card. 

You now have the birds on a branch card made with Peaceful Garden. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Beautiful Gallery Marina Accordion Fold Card

No Comments

This is a great masculine card for any male in your life and is so lovely.  It is fairly quick and easy since the paper does the work, just takes a little time cutting the paper to line up. 

To create this card, you just need a few things:

  • Secret Sea card stock (2025-2027 In Color Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Beautiful Garden designer series paper (2025 Annual Catalog Stampin’ Up)
  • Label die
  • Happiest of Birthdays stamp set (retired Stampin’ Up)
  • Secret Sea ink (2025-2027 In Color Stampin’ Up)
  • Scoring board or scoring blade for trimmer
  • Paper trimmer
  • Adhesive of choice

Take your Secret Sea card stock cut a card base to 5 ½” x 11” and score at 3 ¼”, 5 1/8”, 8” and 9 ½”.  From the 3 ¼” first score, fold the next section in and then accordion fold from there with the last piece forming your card front. 

From the Beautiful Gallery designer series paper find the piece of brown paint and then two of the marina painting.  From the brown paint piece cut a piece to 1 3/8” x 5 3/8” and a second to 1 ¾” x 5 3/8”.  Adhere the 1 3/8” wide piece to the second panel and the 1 ¾” piece to the 4th panel. 

Cutting the marina papers is where it takes a bit of paying attention to get it to all line up to form the same picture when the card is closed.  Trim both pieces of the Marina paper together to 5 3/8” in height so that the picture is the same exact height for both.  Start by cutting the piece for the back, I cut a bit off the right side so it had the single boat starting at the right which then when folded will have all the boats showing, cut to 3 1/8” x 5 3/8”.  Adhere to the back portion of your card.  Fold in the middle and take the second piece of marina paper and see where the boats align to the right and trim to there.  Then cut in from the right to 2 ¾” x 5 3/8”.  Now fold in the front panel and take the leftover piece from the first piece of marina paper and again figure out where the boats need to align and trim the right and then cut to 1 3/8” 5 3/8”.  Andere to the front which gives you your picture when folded and a nice scenic view when open. 

From the Happiest of Birthdays stamp set find the “it’s your day enjoy it!” greeting and stamp onto some Basic Beige in Secret Sea ink.  Take your label die and cut out your greeting.  Adhere only a bit of the label to the front panel making your label centered when your card is closed. 

Cut a piece of Basic Beige to 3” x 5 ¼” for the back of your card.  Take the “wishing you the happiest of birthdays” greeting stamp and your Secret Sea ink and stamp in the upper center.  Adhere your piece of Basic Beige to the back of the back panel of your card. 

There is a great guy birthday card for when you need it.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

The Wilderness Awaits Fox Birthday Card

No Comments

This is a great birthday card for the men in your life.  Masculine cards for some reason are much harder to create over floral or femine cards, but I am going to make myself do more of them.  This card uses Timeless Plaid paper and the The Wilderness Awaits stamp set from Stampin’ Up.  

To create this card, you just need a few things:

  • Basic Beige card stock (Stampin’ Up)
  • Cajan Craze card stock (Stampin’ Up)
  • Timeless Plaid 6” x 6” designer series paper (Stampin’ Up)
  • The Wilderness Awaits stamp set (retired Stampin’ Up)
  • By the Dock stamp set (retired Stampin’ Up)
  • Border die
  • Two label dies (small and medium)
  • Cajan Craze ink (Stampin’ Up)
  • Blender Pens (Stampin’ Up)
  • Cajan Craze (light)
  • Wild Wheat (light)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

To start take a piece of Basic Beige card stock and cut to 4 ¼” x 11” and fold in half to form a 4 ¼” x 5 ½”.  Cut a second piece to 3 7/8” x 5 1/8”” for the inside.  From your Cajan Craze cut a piece to 4 1/8” x 5 ¼” and a second for the inside to 4” x 5 ¼”.  From the Timeless Plaid designer series paper pack find the piece that goes with the Cajan Craze and cut a piece to 4” x 5” and cut a second piece to 1” x 3 7/8”. 

Take the Cajan Craze piece cut to 4 1/8” x 5 ¼” and the Basic Beige piece that is 4” x 5” and stack them together and alight evenly at the bottom edge.  Take your border die of choice and angle across both pieces toward the bottom to your liking and cut, forming the angled front pieces. 

Take a spare piece of Basic Beige and the Jet Black Momento ink and stamp the fox from The Wilderness Awaits stamp set.  Use your Cajan Craze Light Blender Pen to color the fox leaving a bit uncolored around the eyes and nose.  With the Wild Wheat Light Blender Pen color the grass.  Then use your medium size die to cut out the fox.  Take a small whole punch and cut two holes on each side about ½” apart.  Cut two pieces of the twine and string through the wholes on each side.  Adhere the plaid paper to the center of the Cajan Craze piece.  Add pop dots to the back of the fox piece and adhere toward the top and centered and wrap the twine around the edges.  Then adhere to the front top portion of your Basic Beige card base. 

On a spare piece of Basic Beige take the “Happy Birthday” greeting from the By The Dock stamp sent and stamp with Cajan Craze ink.  Then use the small die to cut out and use pop dots to adhere to the lower Basic Beige portion of your card. 

For the inside of your card take the Basic Beige piece and adhere to the piece of Cajan Craze and then adhere the plaid strip across the bottom.  Use your Cajan Craze ink and a birthday greeting and stamp, I use a “Wishing you the very best of birthdays” stamp.  Adhere to the inside of the card. 

This is a great card for any males in your life with a birthday coming up. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Birthday Card

No Comments

This charmer of a Birthday card is made with the Floral Charm designer series paper from Stampin’ Up and the Charming Day stamps and dies.  It is such a lovely suite with a beautiful color palate. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • White card stock
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamp set and Dies (July 2025 Online Exclusive Stampin’ Up)
  • Scallop rectangle die (Retired Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Petal Pink Braided Twine (July 2025 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From a piece of Petal Pink card stock cut your card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut another piece to 1” x 2 ¾”.  From the Floral Charm designer series paper find the Mossy Meadow green piece and also the Petal Pink rose piece.  From the Mossy Meadow piece cut a piece to 3 ¾” x 5 ½” and from the Petal Pink rose piece cut a piece to 3 ½” x 5 ½”.  From white card stock cut a piece of white card stock to 2 ¾” x 4 ¼” and a label piece to ¾” x 2 5/8”

Take a piece of Petal Pink card stock and your Charming Day dies and with the large rose die cut out the roses, then cut out the same with your Mossy Meadow card stock.  Trim the roses from the Petal Pink cutout and glue onto the Mossy Meadow piece leaving the leaves showing from the Mossy Meadow.  With your white label piece, your Mossy Meadow ink and the “Happy Birthday” greeting from the Charming Day stamp set, stamp the greeting and adhere to your Petal Pink label. 

Take your Petal Pink card base and adhere the Mossy Meadow designer series paper to the center of your card base and then the rose designer series paper onto the Mossy Meadow.  Now take the white piece and adhere the label toward the top.  Cut a piece of Petal Pink Braided Twine toward the bottom.  Adhere the rose to your liking and then adhere the white piece to the center for the card front with pop dots. 

For the inside of the card with a take a piece of white card stock and a scalloped edge rectangle die measuring approximately 3 1/8” x 4 3/8” and cut.  Take a birthday greeting, I used “Wishing you the best today and always!” greeting stamp and the Mossy Meadow ink and stamp in the upper center.  Adhere to the inside center of your card. 

You now have a pretty birthday card for anyone you know. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Diagonal Birthday Card

No Comments

This wonderful birthday card made with the Floral Charm designer series paper from Stampin’ Up is just so pretty and it is so easy to make. 

To create this card, you just need a few things:

  • Blackberry Bliss card stock (Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamps and dies (July 2025 Online Exclusive Stampin’ Up)
  • Black Momento ink (Stampin’ Up)
  • Blackberry Bliss ink (Stampin’ Up)
  • Blender Pens (Stampin’ Up)
    • Petunia Pop (light)
    • Blackberry Bliss (light)
    • Pecan Pie (light)
    • Mossy Meadow (light)
  • Charming Shimmer Faceted Dots (July 2025 Online Exclusive Stampin’ Up)
  • Scoring board or paper trimmer scoring blade
  • Paper trimmer
  • Adhesive of choice

For the card base, cut a piece of Blackberry Bliss to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut another one to 1 7/8” x 5”.  From the Basic Beige card stock cut a piece to 4” x 5 ¼” for the inside of your card and one to 1 ½” x 5”.  Then from the Floral Charm designer series paper pack find the piece with the purple flowers and cut a piece to 4” x 5 ¼”.  Then from the back of that paper with the Berry Burst color but a piece to 4 1/8” x 5 3/8” and another to 1 ¾” x 5”.

Now with a spare piece of Basic Beige stamp the single rose flower from the Charmind Day stamp set in Black Momento ink and also one in the lower left corner of your Basic Beige inside of your card.  Color the flower leaves with Petunia Pop Light Blender Pen and then the center and accents in Blackberry Blish Light Blender Pen.  For the leaves color them in with Pecan Pie Light Blender Pen and then color over with the Mossy Meadow Light Blender Pen.  Use the die from the Charming Day dies to cut out the flower. 

To assemble your card, adhere the purple floral piece to the Berry Burst piece and then adhere that to the front of the card base.  Now take your three strips and adhere the Berry Burst piece to the Blackberry Bliss, and then adhere the Basic Beige piece to the top of the Berry Burst piece.  With your Blackberry Bliss ink and the “Happy Birthday” greeting stamp and stamp centered to the right side.  Align over the front of your card base to the angle you would like it to be and trim each end to align with your card edges.  Adhere to the front of your card base and the adhere your flower with pop dots.  Use three of the larger Berry Burst embellishments from the Charming Shimmer Faceted Dots to align in a row below your Happy Birthday. 

With your inside card piece of Basic Beige that you colored the flower on, take your Blackberry Bliss ink and your inside greeting, I used “I can’t think of a nicer person to celebrate” and stamp in the upper center.  Adhere to the inside of your card. 

This is a great card to wish anyone a happy birthday. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading