Cards, Papercrafting

Peaceful Garden Birds on a Branch Card

No Comments

This dainty floral-patterned paper from the Peaceful Garden designer series paper from Stampin’ up seemed like the perfect paper for this birds on a branch die.  I think it turned out adorable, loving it.    

To create this card, you just need a few things:

  • Secret Sea card stock (Stampin’ Up)
  • Wisteria Wonder card stock (retired Stampin’ UP)
  • White card stock
  • Peaceful Garden designer series paper (Stampin’ Up)
  • Birds on a Branch die (unknown)
  • Impressions Abloom dies (Stampin’ Up)
  • Birthday stamps (unknown)
  • Wisteria Wonder ink (retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

Take a piece of Secret Sea card stock and cut a card base to 5 ½” x 8 ½” and fold in half.  Cut another piece to 1” x 3”.  The dainty floral piece of designer series paper seemed more purple than Misty Moonlight and Cloud Cover so I used Wisteria Wonder, but you could use Cloud Cover as well.  From the Wisteria Wonder card stock cut two pieces to 4 1/8” x 5 3/8” and another to 7/8” x 2 7/8”.  From the white card stock cut a piece to 4” x 5 ¼” and another to ¾” x 2 ¾”.  Then from the Peaceful Garden designer series paper pack find the dainty floral piece and cut a piece to 4” x 5 ¼”. 

With one piece of the Wisteria Wonder adhere it to the front of your Secret Sea card stock and then adhere the dainty floral piece to that.  With a spare piece of Secret Sea cut two of the birds on a branch die, and then again with a spare piece of Wisteria Wonder.  Cut the birds off the one of the Wisteria Wonder pieces and adhere over one of the Secret Sea birds.  With the second piece of Secret Sea birds on a branch you cut, cut off the left end leaving 3 leaves to the front of the bird and then cut that bird off the second Wisteria Wonder birds and adhere to this branch.  Then with a spare piece of white card stock and the two small flowers dies from the Impressions Abloom dies and cut six white flowers.  Adhere five of the white flowers to the full birds on a branch set and the sixth flower on the small one. 

Adhere to full birds on a branch that you created to the front of your card.  Then with the ¾” x 2 ¾” white piece and a “Birthday Wishes” greeting stamp and Wisteria Wonder ink, stamp the greeting.  Adhere the white piece to the Wisteria Wonder piece and then to the Secret Sea piece and adhere to the lower right corner of your card.

For the inside of your card, stamp the “I can’t think of a nicer person to celebrate!” stamp with Wisteria Wonder ink toward the top center.  Adhere your smaller bird on a branch piece to the lower left corner.  Adhere this to the Wisteria Wonder and then to the inside of your card. 

You now have the birds on a branch card made with Peaceful Garden. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm You Made My Day Card

No Comments

This card made with the Floral Charm designer series paper from Stampin’ Up is just beautiful, especially this rose paper.  I used the Charming Day stamp set for the rose and added the Petal Pink twine and gems for accents. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • White card stock
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamp set (July 2025 Online Exclusive Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Blender Pens (Stampin’ Up)
    • Petal Pink (light and dark)
    • Mossy Meadow (light)
  • Momento Black Ink (Stampin’ Up)
  • Braided Trim Ribbon in Petal Pink (July 2025 Online Exclusive Stampin’ Up)
  • Charming Shimmer Faceted Dots (July 2025 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

Take a piece of Petal Pink card stock and cut to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut a piece of Mossy Meadow to 4” x 5 ¼” and the from your white card stock cut a piece to 2 ¾” x 3 ¾” and another for the inside of your card to 4” x 5 ¼”.  Find the Petal Pink rose paper from the Floral Charm designer series paper pack and cut a piece to 2 ½” x 3 ¾”. 

On the white piece cut to 2 ¾” x 3 ¾” and with the double rose stamp from the Charming Day stamp set and your Momento Black ink stamp in the right corner.  Use your Petal Pink Blender Pens in light and dark to color the roses and the Mossy Meadow Blender Pens in light to color the leaves.  Take the “you made my day” greeting from the Charming Day stamp set and your Mossy Meadow ink and stamp in the upper left corner. 

With your piece of Mossy Meadow card stock, adhere to the rose piece to the upper portion and the white to the lower portion.  Wrap with the Braided Trim twine and adhere down (regular tape works well for this) and then adhere to the front of your card with pop dots.  Use the Charming Shimmer Faceted Dots to scatter around on the white rose part of your card to a little bit of accent.

For the inside take your piece of white card stock and the “thanks for being you” greeting from the Charming Day stamp set and stamp with your Mossy Meadow ink.  Adhere to the inside of your card.

This card is so pretty to give as a token of thanks for someone who does something special for you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Beautiful Gallery Roses Card

No Comments

This card is so pretty and this lovely paper from the Beautiful Gallery designer series paper from Stampin’ Up just does all the work. 

To create this card, you just need a few things:

  • Secret Sea card stock (2025-2027 In Color Stampin’ Up)
  • White card stock
  • Beautiful Gallery designer series paper (2025 Annual CatalogStampin’ Up)
  • Beautiful Motifs stamp set (Stampin’ Up)
  • Two layering label dies
  • Secret Sea ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice

From your Secret Sea card stock cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Then cut another piece to 3 ¼” x 4 ½” and a piece to 3 ½” x 4 ¾”.  Take scrap piece and cut out a label with the larger label die.  From white card stock cut a piece to 3 ¾” x 5” and a second piece to 3” x 4 ¼” which are both for the inside of the card. 

With the Beautiful Garden designer series paper pack find the piece of Cloud Cover and then also the piece the large roses.  From the Cloud Cover piece cut a piece for the front to 4” x 5 ¼”.  From the roses piece cut a section to 3” x 4 ¼” making sure it has the section you want.  For the inside cut a piece of the remaining paper to 1 3/8” x 3”.  Use the small label die to cut out a label with a die and the Cloud Cover paper.

Adhere the large piece of Cloud Cover to the front of your card.  Then adhere the roses paper to the 3 ¾” x 4 ½” piece and adhere that to the front of the Cloud Cover piece.  Take the two labels and adhere the smaller Cloud Cover label to the Secret Sea label.  From the Beautiful Motifs stamp set take the “you’ve been on my mind” greeting stamp and with your Secret Sea ink stamp on the end of your Cloud Cover label.  Then cut your label to a size you like and adhere to the front of your roses paper in the upper left corner.

For the inside of your card adhere the large white piece and then the piece of Secret Sea and then the smaller white piece.  Now adhere the smaller piece or rose paper toward the left side leaving about 1/8” of white showing on the left side.  Take the “Thinking of you” greeting stamp from the Beautiful Motifs stamp set and with your Secret Sea ink stamp in the center of the white section.

That gives you an elegant card to let someone know you they are on your mind. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website. 

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Fine Art Floral Golden Garden Thank You Card

No Comments

This elegant and easy to make card is a great thank you card for anyone to show your gratitude.  It is made with the Fine Art Floral and Golden Garden designer series papers from Stampin’ Up. 

To create this card, you just need a few things:

  • Calypso Coral card stock (Stampin’ Up)
  • White card stock
  • Fine Art Floral designer series paper (Retired Stampin’ Up)
  • Golden Garden transparent designer series paper (Retired Stampin’ Up)
  • Art Gallery stamp set (Retired Stampin’ Up)
  • Stitched Rectangle dies (Stampin’ Up)
  • Calypso Coral ink (Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Foam Adhesive Strips or pop dots

With the Calypso Coral cut a card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  With the white card stock take the 3 ¾” x 5 ¼” die and the 3 3/8” x 4 ¾” and align both and cut a rectangle frame.  Use the larger die to cut another piece of white for the inside. 

With the Fine Art Floral designer series paper find the piece with the light blue brush stroked background that multi-colored flowers.  Then from the Golden Garden transparency sheets find the one that matches.  Align the papers so the gold is in place over the appropriate area and cut them together to 3 ¾” x 5 ¼” and then cut another section to 1 1/2” x 5”. 

With the large piece of floral designer series paper and the Calypso Coral ink, stamp the “thank you” greeting from the Art Gallery stamp set.  Adhere the frame to the front of the Golden Garden piece.  Use Foam Adhesive strips or cut pop dots in half and align to the outside and adhere to the piece of the floral designer series paper (be careful in your placement as you can’t easily get them back off as the film will peel off, you can guess how I know).  Now adhere this to the front of the Calypso Coral card base.

For the inside of your card, take your white piece of card stock and adhere the floral paper to the inside of the stitches to the left side and then adhere the Golden Garden on top.  With the Calypso Coral ink and the “Thank you for making a difference in my life” greeting from the On the Dock stamp set and stamp to the right upper portion.  Adhere to the inside of your card.

No you just need to figure out who has made a difference in your life and send them a card to thank them. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Birthday Card

No Comments

This charmer of a Birthday card is made with the Floral Charm designer series paper from Stampin’ Up and the Charming Day stamps and dies.  It is such a lovely suite with a beautiful color palate. 

To create this card, you just need a few things:

  • Petal Pink card stock (Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • White card stock
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamp set and Dies (July 2025 Online Exclusive Stampin’ Up)
  • Scallop rectangle die (Retired Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Petal Pink Braided Twine (July 2025 Online Exclusive Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop dots

From a piece of Petal Pink card stock cut your card base to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut another piece to 1” x 2 ¾”.  From the Floral Charm designer series paper find the Mossy Meadow green piece and also the Petal Pink rose piece.  From the Mossy Meadow piece cut a piece to 3 ¾” x 5 ½” and from the Petal Pink rose piece cut a piece to 3 ½” x 5 ½”.  From white card stock cut a piece of white card stock to 2 ¾” x 4 ¼” and a label piece to ¾” x 2 5/8”

Take a piece of Petal Pink card stock and your Charming Day dies and with the large rose die cut out the roses, then cut out the same with your Mossy Meadow card stock.  Trim the roses from the Petal Pink cutout and glue onto the Mossy Meadow piece leaving the leaves showing from the Mossy Meadow.  With your white label piece, your Mossy Meadow ink and the “Happy Birthday” greeting from the Charming Day stamp set, stamp the greeting and adhere to your Petal Pink label. 

Take your Petal Pink card base and adhere the Mossy Meadow designer series paper to the center of your card base and then the rose designer series paper onto the Mossy Meadow.  Now take the white piece and adhere the label toward the top.  Cut a piece of Petal Pink Braided Twine toward the bottom.  Adhere the rose to your liking and then adhere the white piece to the center for the card front with pop dots. 

For the inside of the card with a take a piece of white card stock and a scalloped edge rectangle die measuring approximately 3 1/8” x 4 3/8” and cut.  Take a birthday greeting, I used “Wishing you the best today and always!” greeting stamp and the Mossy Meadow ink and stamp in the upper center.  Adhere to the inside center of your card. 

You now have a pretty birthday card for anyone you know. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Beautiful Gallery Sympathy Tent Card

No Comments

This floral paper from the Beautiful Gallery designer series paper from Stampin’ Up made a lovely sympathy card for when it is needed.  This tent style card is the perfect design for this paper. 

To create this card, you just need a few things:

  • Basic Beige card stock (Stampin’ Up)
  • Mossy Meadow card stock (Stampin’ Up)
  • Beautiful Gallery designer series paper (2025 Annual Catalog Stampin’ Up)
  • Lasting Lily stamp set (Retired Stampin’ Up)
  • Mossy Meadow ink (Stampin’ Up)
  • Paper trimmer
  • Score board or scoring blade for paper trimmer
  • Adhesive of choice

From your Basic Beige card stock cut a piece to 4 ¼” x 5 ½ for the card base.  Cut a piece to 3 ½” x 4 ½” and score at 4 ¼”.  Cut another piece for the greeting label to 7/8” x 3 1/8” and for the inside cut a piece to 2 5/8” x 3 ½”.  Then from Mossy Meadow card stock cut two pieces to 3 3/8” x 4 ¼” and two pieces to 7/8” x 4 ¼” and one for the label to 1” x 3 3/8”.  Find the white rose floral paper from the Beautiful Gallery designer series paper pack, cut about ¼” off of the top to get rid of the box outline.  Then cut the bottom off at 4 ¼” and trim about ¼” off of each side to get rid to the box outline.  Cut two pieces to ¾” and a third to 3 ¼” x 4 ¼”. 

Take the to pieces of Basic Beige you cut for you card base, the 4 ¼” x 5 ½” piece is the bottom and then the 3 ½” x 4 ½” scored piece fold the ¼” score down.  Find the two Mossy Meadow 7/8” x 4 ¼” pieces and adhere one to each side of the card base with an edge on the outside of about 1/16”.  Then adhere the center piece by adhering the 1/4″ part to the back of the card in the center between your two Mossy Meadow pieces.  Adhere to two ¾” x 4 ¼” strips of floral to each side onto the Mossy Meadow.  Then adhere your 3 3/8” x 4 ¼” piece of Mossy Meadow to the front of your center panel and then the floral piece to the center of that. 

Now take the label piece of Mossy Meadow and adhere across your front center panel toward the bottom, up about ¼”.  Then take your label piece of Basic Beige, your Mossy Meadow ink and the “With Sympathy” greeting stamp and stamp on your label.  Adhere your Basic Beige label over the Mossy Meadow label piece. 

For the inside adhere your piece of Mossy Meadow and then the piece of Basic Beige.  With the “Our thoughts are with you” greeting stamp and the Mossy Meadow ink and stamp on the upper center of the Basic Beige piece. 

This card just fell together and while I wasn’t a great fan of the paper, I love it on this card, I think it is just a beautiful sympathy card. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Diagonal Birthday Card

No Comments

This wonderful birthday card made with the Floral Charm designer series paper from Stampin’ Up is just so pretty and it is so easy to make. 

To create this card, you just need a few things:

  • Blackberry Bliss card stock (Stampin’ Up)
  • Basic Beige card stock (Stampin’ Up)
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamps and dies (July 2025 Online Exclusive Stampin’ Up)
  • Black Momento ink (Stampin’ Up)
  • Blackberry Bliss ink (Stampin’ Up)
  • Blender Pens (Stampin’ Up)
    • Petunia Pop (light)
    • Blackberry Bliss (light)
    • Pecan Pie (light)
    • Mossy Meadow (light)
  • Charming Shimmer Faceted Dots (July 2025 Online Exclusive Stampin’ Up)
  • Scoring board or paper trimmer scoring blade
  • Paper trimmer
  • Adhesive of choice

For the card base, cut a piece of Blackberry Bliss to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Cut another one to 1 7/8” x 5”.  From the Basic Beige card stock cut a piece to 4” x 5 ¼” for the inside of your card and one to 1 ½” x 5”.  Then from the Floral Charm designer series paper pack find the piece with the purple flowers and cut a piece to 4” x 5 ¼”.  Then from the back of that paper with the Berry Burst color but a piece to 4 1/8” x 5 3/8” and another to 1 ¾” x 5”.

Now with a spare piece of Basic Beige stamp the single rose flower from the Charmind Day stamp set in Black Momento ink and also one in the lower left corner of your Basic Beige inside of your card.  Color the flower leaves with Petunia Pop Light Blender Pen and then the center and accents in Blackberry Blish Light Blender Pen.  For the leaves color them in with Pecan Pie Light Blender Pen and then color over with the Mossy Meadow Light Blender Pen.  Use the die from the Charming Day dies to cut out the flower. 

To assemble your card, adhere the purple floral piece to the Berry Burst piece and then adhere that to the front of the card base.  Now take your three strips and adhere the Berry Burst piece to the Blackberry Bliss, and then adhere the Basic Beige piece to the top of the Berry Burst piece.  With your Blackberry Bliss ink and the “Happy Birthday” greeting stamp and stamp centered to the right side.  Align over the front of your card base to the angle you would like it to be and trim each end to align with your card edges.  Adhere to the front of your card base and the adhere your flower with pop dots.  Use three of the larger Berry Burst embellishments from the Charming Shimmer Faceted Dots to align in a row below your Happy Birthday. 

With your inside card piece of Basic Beige that you colored the flower on, take your Blackberry Bliss ink and your inside greeting, I used “I can’t think of a nicer person to celebrate” and stamp in the upper center.  Adhere to the inside of your card. 

This is a great card to wish anyone a happy birthday. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Floral Charm Step Easel Card

No Comments

I love the colors of this card and this beautiful paper from Floral Charm designer series paper from Stampin’ Up.  This step easel card was a bit of a different design and perfect to showcase this paper. 

To create this card, you just need a few things:

  • Night of Navy card stock (Stampin’ Up)
  • Pink card stock (mulit-pack from Michael’s)
  • Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
  • Charming Day stamp set (July 2025 Online Exclusive Stampin’ Up)
  • Birthday Wishes for a Wonderful Birthday stamp (PSX F-318)
  • Night of Navy ink (Stampin’ Up)
  • Charming Shimmer Faceted Dots (July 2025 Online Exclusive Stampin’ Up)
  • Scoring board or paper trimmer scoring blade
  • Paper trimmer
  • Adhesive of choice

From the Night of Navy card stock cut a card base to 5 ½” x 8 ½” and score at 4 ¼” and 6 3/8” and fold into a “Z” shape.  Also cut a piece to 3 ½” x 4” and score at 3 ½” and then a piece to 1” x 3” for the label.  From the pink card stock cut two pieces to 3 1/8” x 3 1/8” and one to 1 7/8” x 5 ¼” and another to 7/8” x 2 7/8”. 

From the Floral Charm designer series paper find the piece with the pink roses and the Night of Navy floral back.  From the blue side cut a piece to 4 1/8” x 5 3/8” and two pieces to 2” x 5 3/8”.  From the rose side cut a piece to 3” x 3” and another to 1 7/8” x 5 ¼”.    

Take the small label piece of pink card stock cut to 7/8” x 2 7/8” and the Charming Day stamp set and find the ”happy birthday” stamp and then stamp in Night of Navy, then adhere to the Night of Navy piece.  Then with the “best wishes for a wonderful birthday” greeting stamp and with the Night of Navy stamp onto the pink piece cut to 1 7/8” x 5 ¼”. 

To assemble start by adhering the large Night of Navy floral piece to the back of your card base behind the flap.  Now take the Night of Navy piece you cut to 3 1/3” x 4” and put adhesive on the ½” portion and adhere to the center of the top of your card base for the flap.  Then adhere the 3 1/8” x 3 1/8” pink piece and then the 3” x 3” pink roses paper.    Take the other 3” x 3” pink piece and adhere under the flap on the Night of Navy floral piece. 

Then on the two lower sections, adhere the two Night of Navy pieces.  Adhere the pink piece with your greeting to the center section and then the pink floral piece to the bottom section.  Now take the small label and with pop dots adhere to the front of the rose lower section, making sure it is covered when the top flap is closed.  To finish adhere a few embellishment dots from the Charming Shimmer Faceted Dots to the rose paper on the top flap. 

I can’t wait to give this card to one of my friends as it turned out so nice with beautiful colors. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Bouquet of Roses Charming Day Card

No Comments

This card is made with the rose die from the Stampin’ Up Charming Day stamps and dies.  This lovely rose die in the Charming Day suite makes such pretty roses and were perfect for my card.  I saw a similar card on Facebook and thought it was such a great idea though I can’t find what site I found it on, and this die was perfect for what I wanted.

To create this card, you just need a few things:

  • Darling Duckling card stock (2025-2027 In Colors from Stampin’ Up)
  • Strawberry Slush (2025-2027 In Colors from Stampin’ Up)
  • Old Olive card stock (Stampin’ Up)
  • White card stock
  • Subtle 3D embossing folder (Stampin’ Up)
  • Charming Day stamps and dies (July 2025 Online Exclusive Stampin’ Up)
  • Fancy Border Dies (2025 Online Exclusive Stampin’ Up)
  • Strawberry Slush ink (2025-2027 In Colors Stampin’ Up)
  • White Crinkle Ribbon (Retired Stampin’ Up)
  • Paper trimmer
  • Adhesive of choice
  • Pop Dots

With white card stock cut your card base to 5 1/2” x 8 ½” and fold in half to 4 ¼” x 5 ½”.  Then cut a piece to 4 1/8” x 5 3/8” and two pieces to 3 ¾” x 5”.  Then with your Darling Ducking card stock cut two pieces to 4” x 5 ¼”. 

With the Subtle 3D embossing folder emboss the 4 1/8” x 5 3/8” white card stock and one of the 3 ¾” x 5”.  Now with the 3 ¾” x 5” embossed white piece and one of your Darling Duckling pieces and align the white over the Darling Duckling with the right upper corner hanging over the right upper about 1/8” on each side then use the simple Fancy Border Die along each corner and cut to cut the corner to make a spot to hold your flowers like they are wrapped in paper.  Then adhere the white piece to the Darling Duckling. 

Now cut three roses from the rose die in the Charming Day dies from the Strawberry Slush card stock, and another three from Old Olive card stock.  Then also cut one of the leaves with the die from Old Olive.  The cut the rose tops off the Strawberry Slush roses you cut and adhere to the Old Olive roses you cut so you have the green for stems and leave and the pink rose.  Align your roses through the slot you cut and adhere to the back and then adhere the whole thing to the larger white embossed piece.  Then adhere your leaves die cut piece to the back of your three roses just to add a bit of filler. 

Cut a Darling Duckling tag and a smaller white tag and adhere together.  Stamp the “you made my day” greeting on the white label with Strawberry Slush ink.  Adhere to the front of your card.  Take a piece of White Crinkle Ribbon and tie a bow and adhere to the base of the roses.

Now for the inside of your card take the white piece and adhere to the Darling Duckling piece.  Take the “Thanks for being you” greeting and stamp on the upper portion of your white card stock.  Adhere to the inside of your card.

This gives you a lovely bouquet card to make someone’s day. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading

Cards, Papercrafting

Charming Day Floral Thanks Card

No Comments

This Floral Charm suite is a really pretty set and I really like that the back of each floral piece of the Floral Charm designer series paper matches the front perfectly.  The floral papers are just beautiful, including this lovely berry burst piece I used for this card. 

To create this card, you just need a few things:

  • Berry Burst card stock (Stampin’ Up)
  • Smokey Slate card stock (Stampin’ Up)
  • Floral Charm designer series paper (Stampin’ Up)
  • Charming Day stamps (Stampin’ Up)
  • Berry Burst ink (Stampin’ Up)
  • Berry Burst ribbon (Retired Stampin’ Up)
  • Scoring board or paper trimmer scoring blade
  • Paper trimmer
  • Adhesive of choice

From your Berry Burst card stock cut a card base to 4 ¼” x 5 ½” and the fold over flap to 1 7/8” x 11” and fold in half.  From the Smokey Slate card stock cut a piece to 4 1/8” x 5 3/8”, two pieces to 1 ¾” x 4 1/8” and another piece to 1 3/8” x 3 5/8”.  Take your Floral Charm designer series paper pack find the piece with the large pink flowers and also the piece of Berry Burst.  Cut two of the floral pieces (highlighting the pink flowers) to 1 5/8” x 4”.  From the berry Burst designer series paper 1 5/8” x 4”. 

With the Smokey Slate piece you cut to 1 3/8” x 3 5/8”, Berry Burst in and the “Thanks for being you” greeting stamp from the Charming Day stamp set and stamp in the other portion.  Take the Berry Brust ribbon and wrap a piece around the Smoky Slate card stock piece about a 1/3 of the way down from the top and tie a knot and trip ends to preferred length.  Take of the of the 1 ¾” x 4 1/8” Smokey Slate pieces you cut and stamp the “you made my day” greeting toward the top. 

Now just start building your layers.  Take your Berry Burst card base and the Smokey Slate piece cut to 4 1/8” x 5 3/8” and adhere to the Berry Brust.  Then adhere each of your two floral pieces, one to each side.  On the outside of your flap layer your piece of Smokey Slate, the Berry Burst designer series paper piece and then the stamped Smokey Slate piece stamped “Thanks for being you”. 

Take your 1 7/8” x 11” piece you folded in half and adhere to the center portion of your card. 

There, you now have a pretty card to give to someone who made your day, so you can make theirs as well. 

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.  Also, if you would like to purchase any Stampin’ Up products, please visit my website at https://www.stampinup.com/?demoid=2269501.

All cards are handmade and photos taken by DaisyChainFun.

Continue Reading