Floral – Page 3

Berry Botanicals Have a Good Day Card

May 30, 2026 No Comments

The Berry Botanicals Vellum from Stampin’ Up was a nice surprise, it is a nice heavy vellum that actually lets you use adhesive without showing through. Then the Scalloped Blooms dies made the perfect combination for the floral vellum for this design.

To create this card, you just need a few things:

White card stock
Berry Botanicals Vellum (May 2026 Product of the Month Stampin’ Up)
Scalloped Blooms stamp set and dies (2026 Annual Catalog Stampin’ Up)
Bordered Ribbon – Peaceful Pine (2026-2028 In Color Stampin’ Up)
Peaceful Pine ink (2026-2028 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For you card base cut a piece of white card stock to 5 ½” x 8 ½” and fold in half. Cut another piece to 3 ¼” x 4 ½” for the inside of your card. Now take your 2 1/8” scallop die and cut three white scalloped circles. Then use the From the Berry Botanical Vellum pack find the Peaceful Pine polka dots sheet and cut two pieces to 4” x 5 ¼”. Then from the floral piece cut three of the 2 1/8” scallop circles from the die.

Now adhere one of the Peaceful Pine pieces to the front of your card base. Then adhere each of your floral scallop circles to the white floral scallop circles. Adhere one in the upper left corner, one in the lower left corner and one in the center to the right side.

From some scrap white card stock cut one of the smaller tags, I used the more square one with no scallops. Use your Peaceful Pine ink to stamp the “have a good day” greeting. Now cut a piece of the Bordered Peaceful Pine Ribbon and fold in half, putting the folded end through the hole to the back and pulling the other end through your folded hole and pulling tight. Trim the ends at an angle. Use pop dots to adhere in the lower left corner angled down with the ribbon end over the two lower circles.

For the inside adhere the second green polka dot piece to the back panel and the white piece centered on it. Use your Peaceful Pine ink to stamp the “wishing you a day of relaxation, happiness, and love” greeting in the upper center.

What an easy and quick card to wish someone a good day!

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Bloom Boutique Happy Birthday Card

May 29, 2026 No Comments

Used some angles for this card to give it a unique design. This beautiful floral paper from the Bloom Boutique designer series paper pack along with the stamps and dies of the Boutique Blossoms and Scalloped Blooms sets from Stampin’ Up made this lovely card.

To create this card, you just need a few things:

Crisp Cantaloupe card stock (2026-2028 In Color Stampin’ Up)
Petal Pink card stock (Stampin’ Up)
White card stock
Bloom Boutique designer series paper (2026 Annual Catalog Stampin’ Up)
Boutique Blossoms stamp set and dies (2026 Annual Catalog Stampin’ Up)
Scalloped Blooms stamp set (2026 Annual Catalog Stampin’ Up)
2026-2028 In Color Dots (2026-2028 In Color Stampin’ Up)
Crisp Cantaloupe ink (2026-2028 In Color Stampin’ Up)
Peaceful Pine Light Blender Pen (2026-2028 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For your card base cut a piece of Crisp Cantaloupe card stock to 4 ¼” x 11” and fold in half to 4 ¼” x 5 ½”. With your white card stock cut a piece for the front to 4 1/8” x 5 3/8” and one for the inside to 4” x 5 ¼”. From the Bloom Boutique designer series paper find the light colored florals with the crisp cantaloupe theme and cut a piece to 4” x 5 ¼”.

Take your floral piece and a piece of Crisp Cantaloupe and angle the Crisp Cantaloupe piece across the right side of your floral piece in about 1” on the top right corner and about 1 ½” on the bottom left corner, adhere down and then flip over and cut your edges of the Crisp Cantaloupe up to your floral piece edges. Now angle the Petal Pink piece across the bottom about ¾” up on the left side and about 2” up on the right side, adhere down and flip over and trip again to your floral piece edges.

Now with your Crisp Cantaloupe ink and the filled in daisy stamp from the Boutique Blossoms stamp set and stamp five flowers and cut them out with the die. Also, with a piece of white card stock use the large leave sprig die to cut out one and then take the Peaceful Pine Light Blender Pen and color in the leaves, gives a lighter sprig than cut direct from Peaceful Pine which was what I tried first. Adhere your leaves sprig on the center of the Crisp Cantaloupe part of your card front and then four of the flowers on pop dots over them. Take the fifth flower and adhere to the left side of the Petal Pink piece. Now use your Crisp Cantaloupe ink and stamp the “happy birthday” from the Scalloped Blooms stamp set on the right side of the Petal Pink piece. Now adhere this to the white piece measuring 4 1/8” x 5 3/8” and then adhere to the front of your card base.

For the inside of your card, adhere the white piece to the back panel. Use your Crisp Cantaloupe ink to stamp the same daisy flower in the lower left corner and the “wishing you a day of relaxation, happiness and lover greeting in the upper center.

What a bright and cheery birthday card for any friend of family member.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Berry Botanical Thank You Card

May 26, 2026 No Comments

This vellum from the Berry Botanicals from Stampin’ Up is so nice to work with, I am not the biggest fan of vellum but this is thick enough that you can use adhesive and it doesn’t show through. This floral thank you card is made fully with white card stock and vellum.

To create this card, you just need a few things:

White card stock
Berry Botanicals Vellum (May 2026 Product of the Month Stampin’ Up)
Scalloped Blooms stamp set (Stampin’ Up)
Peaceful Pine ink (Stampin’ Up)
Paper trimmer
Adhesive of choice

Take a piece of white card stock and cut a card base to 5 ½” x 8 ½” and fold in half. Cut another piece to 3” x 4”, one to 1 7/8” x 3 ¼” and one to 1 ½” x 2 7/8”. From the Berry Botanicals Velum find the Fresh Freesia piece and the fuller floral piece. Cut the Fresh Freesia to 4 1/8” x 5 3/8” and another to 1 ¾” x 3 1/8”. The from the floral vellum cut a piece to 2 7/8” x 3 7/8” and another to 1” x 3 ¾”. Then find a purple flower in some spare floral vellum and cut out with some of the leaves forming a square in one corner.

Take the Fresh Freesia pieces measuring 4 1/8” x 5 3/8” and adhere to the front of your card base. Then take the floral piece measuring 2 7/8” x 3 7/8” and the white piece measuring 3” x 4” and adhere together. Adhere this to the front of your card base about ½” in on the left side of the Fresh Freesia, centered from top and bottom. Take the smaller Fresh Freesia piece and adhere to the white base and then the smaller white piece to the front of that.

Use the “thank you for being there for me” greeting from the Scalloped Blooms stamp set and stamp to the right side of the smaller white piece and then adhere your cut out flower to the left side in the lower left corner.

For the inside adhere your floral strip to the bottom section of your back inside panel. Use your Peaceful Pine ink to stamp the “you’re a blessing to me” greeting in the upper center.

What a quick and easy card with this floral vellum.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Bloom Boutique Split Fold Card

May 23, 2026 No Comments

This card turned out really pretty with the new Hydrangea Hue color from 2026-2028 In Colors from Stampin’ Up. This card is made with the Bloom Boutique designer series paper and the Boutique Blossoms and Scalloped Blooms stamp and die sets. I have been wanting to make this split fold card as it has been a while and this paper worked perfectly.

To create this card, you just need a few things:

Hydrangea Hue Pearlized Specialty Paper (2026-2028 In Color Stampin’ Up)
White card stock
Bloom Boutique designer series paper (2026 Annual Catalog Stampin’ Up)
Boutique Blossoms stamp set and dies (2026 Annual Catalog Stampin’ Up)
Scalloped Blooms stamp set and dies (2026 Annual Catalog Stampin’ Up)
Hydrangea Hue ink (2026-2028 In Color Stampin’ Up)
Golden Glow Light Blender Pen (2026-28 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

There is a bit of cutting, but then this card goes together quick. For you card base cut a piece of the Hydrangea Hue Pearlized 12” x 12” paper to 5 ½” x 12” and score at 2”, 4”, 6” and 8” and then starting for the large back panel, fold in, out, in and back out. Then with your paper trimmer cut 1 ¼” down from the top on panels 2 and 3. And then the same at the bottom, 1 ¼” up from the bottom on panels 2 and 3. Cut another piece to 2 7/8” x 3 3/8”.

From the Bloom Boutique designer series paper pack find the Hydrangea Hue colored pieces with the small flowers and then the piece with the florets. Cut the following:

Small flowers piece:

One piece to 3 ¾” x 5 ¼” for the back of your card
Two pieces to 1 ¾” x 5 ¼” for panel 1 and 4

Blue florets piece:

Two pieces to 1 ¾” x 3 ¾” for the center of panels 2 and 3
Four pieces to 1” x 1 ¾” for the top and bottom of panels 2 and 3

White card stock:

One piece to 3 7/8” x 5 3/8” for the back panel
One piece to 2 ¾” x 3 ¼” for the center of your back panel
Two pieces to 1 7/8” x 5 3/8” for panel 1 and 4
Two pieces to 1 7/8” x 2 7/8” for the center of panels 2 and 3
Four pieces to 1 1/8” x 1 7/8” for the top and bottom of panels 2 and 3

Now that the cutting is done just assembly each flower or floret piece to the coordinating white piece and adhere to the appropriate panel and laid out above. For panels 2 and three, the small top and bottom sections fold in while the larger center section folds out.

For the stamping, with your Hydrangea Hue ink stamp two of the medium sized flower by stamping the background stamped off and then stamping the outline over it. Use the Golden Glow Light Blender Pen to color the centers. Then stamp four of the small daisy flower outlines and color the centers of those with the Golden Glow Light Blender Pen. Use the appropriate dies to cut them out. Then cut out the large leaf and two of the three leaves dies in Hydrangia Hue card stock or Pearlized Specialty paper. From white card stock cut out the square label with the scalloped edge from the Scalloped Blooms dies and stamp the “you’re a blessing to me” greeting at the bottom above the scallops.

Adhere the large leaf leaving to the left and up leaving about an 1” from the top. Cut one leaf off where it won’t show. Adhere the two larger flowers as desired and then the three daisies around them. Adhere the two three leaf sets to the left and right sides of the others and then use the single leaf you cut off with one of the daisies.

For the inside I left it blank and just added one of the daisy flowers in the right corner.

What a lovely card to let someone know how much they mean to you.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Floral Charm Thank You Floral Strip Card

May 20, 2026 No Comments

This card made with strips of paper turned out cute. It was made with the Floral Charm designer series paper from Stampin’ Up and the Charming day stamp set.

To create this card, you just need a few things:

Mossy Meadow card stock (Stampin’ Up)
Timid Tiger card stock (2025-2027 In Color Stampin’ Up)
White card stock
Floral Charm designer series paper (July 2025 Online Exclusive Stampin’ Up)
Charming day stamp set (July 2025 Online Exclusive Stamp in’ Up)
Two layered label dies
Mossy Meadow ink (Stampin’ Up)
Scissors
Paper trimmer
Adhesive of choice
Pop dots

With the Mossy Meadow card stock cut your card base to 5 ½” x 8 ½” and fold in half. Take your Timid Tiger card stock and cut two pieces to 4 1/8” x 5 3/8” and then 4 strips to 3/8” x 4”. From white card stock cut an inside piece to 4” x 5 ¼”. Take your Floral Charm designer series paper pack find the orange floral piece and cut 5 strips to 7/8” x 4”, keeping them in order.

Take the Timid Tiger piece you cut to 4 1/8” x 5 3/8” and start adhering your strips. Start with the top adhering your top piece just at the top so you can slide your strip under. Fully adhere your bottom strip to the bottom of the Timid Tiger background. Then work at adhering your orange dividing strips and your three center floral strips, sizing them as close to the same as possible.

From a scrap piece of Mossy Meadow, cut the larger size laying label and from a scrap piece of white card stock cut the smaller label. With your Mossy Meadow ink and the “Thanks for Being You” greeting stamp from the Charming Day stamp set, stamp on your white label toward the right side. From a scrap piece of your floral paper cut out a floral section and adhere to the left side of your label, or you can stamp and color a flower and leaves to use (I am not the best at coloring so I rather fussy cut 😊). Adhere you white label with pop dots to your Mossy Meadow label and then adhere them to the front of your card about 1/3 of the way from the top.

For the inside of your card adhere your white card stock piece to the Timid Tiger piece and adhere to the inside of your card. From the Charming Day stamp set find the “you made my day” greeting stamp and with your Mossy Meadow ink stamp in the upper portion of your card. I had stamped and colored a flower for the front that I didn’t use so I used in on the inside, you could also fussy cut another. The stamped flower was colored with Light Timid Tiger and Light Mossy Meadow Stampin’ Blends.

This is a fairly neutral thank you card that could be given to most anyone to let them know you appreciate something they did to make your day brighter.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Moonlit Flora Amazing Friend Moth Double Z-Fold Card

May 15, 2026 No Comments

I love this Moonlit Flora designer series paper from Stampin’ Up and I have wanted to do something to highlight the green moth so this is the design I came up with to do that. A double Z-fold card with the Moonlit Flora designer series paper and the Fern & Flora stamp set and dies.

To create this card, you just need a few things:

Secret Sea card stock (2025-2027 In Color Stampin’ Up)
White card stock
Moonlit Flora designer series paper (2026-2028 In Color Stampin’ Up)
Fern & Flora stamp set and dies (2026-2028 In Color Stampin’ Up)
Dewdrops Embellishments (2026-2028 In Color Stampin’ Up)
Secret Sea ink (2025 – 2027 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For you card base cut a piece of Secret Sea card stock 7 ½” x 10 ¼” and score at 4 ¼” and 7 ¼”, then cut 2” off the bottom to make a 5 ½” x 10 ¼” card base. From white card stock cut the following:

One 1 7/8” x 4 1/8”
Two 1 7/8” x 2 7/8”
Two 2 7/8” x 5 3/8”
One 4 1/8” x 5 3/8”
One 1 ½” x 2 ½”

Take the Moonlit Flora designer series paper and find the firms piece with the white moths and large green moth and the one with the Secret Sea diamond shapes. Cut out the large moth. Cut the white moth paper into three sections with the first two measuring 2 ¾” x 5 ¼” and the last section to 4” x 5 ¼”. From the Secret Sea blue diamond paper cut one piece to 1 ¾” x 4” and two to 1 ¾” x 2 ¾”. Fussy cut out the large green moth.

Take your scored card base with the large section of the right and fold the two sections to the right and then the last section to the left. Adhere each white piece to each section and then your fern pieces to the front of each white piece in order so they flow. Do the same with the long strip except it goes the opposite direction with the large section as the top first piece and the short section to the back of the card. Adhere the long section of the strip to the front short section of your card about 1” up from the bottom making sure to only put adhesive where needed. Then adhere the short section to the back of your card base.

With some white card stock stamp the “you’re an amazing friend” greeting in Secret Sea ink and then stamp the label stamp around it. Then use the label die to cut it out. Adhere to the front left side of the blue diamond paper on the strip using pop dots. Then adhere the large moth you cut out with pop dots overlaying on your label. Ad a few of the Secret Sea embellishments from the Dewdrops Embellishments around your moth and label area.

Adhere the last smallest white piece to the middle section of the strip.

I really wanted to use the large green moth and this card layout makes it the star, love the way it turned out.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Moonlit Flora World A Better Place Card

May 5, 2026 No Comments

I am pretty infatuated with this new Moonlit Flora designer series paper from Stampin’ Up with the Fern and Flora stamps and dies. This block card was the perfect design for this paper to showcase the white moth’s and flowers. This lovely design came from my Stampin’ Up Upline and friend from her Facebook Live at MyStampinStyle.com.

To create this card, you just need a few things:

Secret Sea card stock (2025-2027 In Color Stampin’ Up)
Mossy Meadow card stock (Stampin’ Up)
Old Olive card stock (Stampin’ Up)
White card stock
Moonlit Flora designer series paper (2026 Annual Catalog Stampin’ Up)
Fern & Flora stamp set and dies (2026 Annual Catalog Stampin’ Up)
Secret Sea ink (2025-2027 In Color Stampin’ Up)
Paper trimmer
Adhesive of choice
Pop dots

For you card base cut a piece of white card stock to 5 ½” x 8 ½” and fold in half to 4 ¼” x 5 ½”. From white card stock also cut a piece to 3 ¾” x 5”, two pieces to 1 7/8” x 3 1/8” and two to 1 7/8” x 1 7/8”. Cut two pieces of Secret Sea card stock to 4” x 5 ¼”. From the Moonlit Flora designer series paper find the paper that has the white flowers and cut two pieces that have the flowers on them to 1 ¾” x 3” and then the paper with the white moths cut two pieces to 1 ¾” x 1 ¾”.

With the Mossy Meadow card stock cut out the large leaf die and the fern die and from the Old Olive card stock cut one of the fronds. From some white card stock cut out a few of the dainty flowers. Use the label die to cut out a label from the white card stock. Use the “you make the world a better place” greeting stamp and stamp on the label in Secret Sea ink.

With your white card base, adhere one of the Secret Sea pieces to the front. Then adhere each of your flower and moth pieces to the white pieces and adhere each to the front of your card with the two long pieces in opposite corners and then the square pieces in the other opposite corners, choose the corners based on the paper. Now trim the leaf down and adhere to the back left of the label, the frond and the fern (also trimmed down) to the front left of the label and then decorate with a few of the white flowers. Adhere the label to the right side of your card front with pop dots.

For the inside of the card adhere the second Secret Sea piece and then the white piece. Cut one of the larger leaf dies out of Old Olive, trim down and adhere in the upper left corner. Use your Secret Sea ink and the ‘thankful for you” greeting and stamp in the upper right section of the card next to the leaf piece.

Such a lovely thank you card for anyone that lets you say how much you appreciate them.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Favored Flowers Purple Floral Sympathy Card

May 3, 2026 No Comments

The Favored Flowers designer series paper from Stampin’ Up makes some lovely sympathy cards for when you need them. This one with the purple floral paper and Mossy Meadow is so simple but beautiful. I did make this card in a larger format as it was for work for everyone to sign and I needed more space.

To create this card, you just need a few things:

Mossy Meadow card stock (Stampin’ Up)
Fresh Fresia card stock (Stampin’ Up)
Favored Flowers designer series paper (retired Stampin’ Up)
Peace on Earth stamp set (Retired Stampin’ Up)
Memory stamp for inside (Amerian Art GRS20.G)
Rectangle Stitched dies (retired Stampin’ Up)
Mossy Meadow ink (Stampin’ Up)
Paper trimmer
Adhesive of choice

For you card base cut a piece of Mossy Meadow card stock to 7” x 10” and fold in half to 5” x 7” card base. Using the 3” x 4 3/8” stitched rectangle die cut a piece and then another with the 1 3/8” x 2 ¾” stitched rectangle. From some Fresh Fresia cut a piece to 4 ¾” x 6 ¾” for the inside of your card and a 1” x 2 3/8” with a stitched rectangle die. From the Favored Flowers designer series paper pack find the purple floral piece and cut a piece to 4 ¾” x 6 ¾”, then use the 2 5/8” x 4” stitched rectangle die cut out the center of your floral piece.

Take your large floral piece with the center cut out and adhere to the front of your card base. Adhere the cut out floral piece to the large Mossy Meadow rectangle and then adhere that over your cut out, aligning with where it would have been cut from.

Take the small Fresh Fresia piece and with Mossy Meadow ink stamp the “With deepest sympathy” from the Peace on Earth stamp set. Adhere to the small Mossy Meadow piece and then adhere over your center flower piece overhanging to the right side.

For the inside adhere the large Fresh Fresia piece you cut and then stamp the “when someone you love becomes a memory, the memory becomes a treasure” greeting in Mossy Meadow ink in the upper center of the inside of your card.

A lovely sympathy card for anyone to receive in a difficult situation.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Let’s Celebrate Birthday Card

April 29, 2026 No Comments

I love this Everyday Happiness paper from Stampin’ Up but I have a hard time designing some cards with it, but I thought this one turned out cute. It was influenced by the Happy Day banner dies that I got in the 2025 Spellbinders Advent.

To create this card, you just need a few things:

White card stock
Everyday Happiness designer series paper (Retired Stampin’ Up)
Simply Sketched stamp set (Retired Stampin’ Up)
Sentimental Park stamp set (Retired Stampin’ Up)
Label layered dies – not sure from what set (Retired Stampin’ Up)
Banners Spellbinder S1-168 W9 (2025 Advent Calendar Spellbinder)
Lost Lagoon ink (Stampin’ Up)
Bakers Twine Essentials Pack (Stampin’ Up)
Opaque Faceted Gems (Retired Stampin’ Up)
Paper trimmer
Adhesive of choice

With a piece of white card stock cut a card base to 5 1/2” x 11” an then angle the top from the 5 ½” to 3 3/8”. Then score at 4 ¼” and 7 5/8” starting from the high end as you want the high back panel to be full size and the other two panels will be skinnier. Folding from the higher back panel with the high side on the right, fold the middle panel up and the front panel back to form a z-fold.

Get your Everyday Happiness designer series paper pack and find the floral paper, the gold with the stars, the blue to gold variegated and the blue checked papers. Use the blue checked paper for the back panel, cutting to 4” x 5 ¼” and angling to the left to 4 3/8”. Use the blue gradient paper for the inside middle panel, cutting to 3 1/8” x 4 ¼” and angle to the left to 3 ½”. For the front back panel use the gold star paper and cut to 3 1/8” x 4 ¼” and angle to the right to 3 ½”. Then for the front panel use the floral paper cut to 3 1/8” x 3 ½” and angle to 2 7/8”. Finally cut a panel from white card stock to 3 1/8” x 4 ¼” and angle to the right to 3 ½”.

Adhere each to their perspective panels and then adhere to white piece to the back panel onto the blue checked paper so it is hiding under the other panels when folded, same as the inside middle panel but going the opposite direction. Cut out two of the flowers from a scrap piece of the floral paper and two of the grey leaves and adhere those to the bottom left of the white inside panel. Use the “Happy Birthday Wishes” greeting stamp from the Simply Sketched stamp set in Lost Lagoon ink and stamp to the upper portion of that inside white panel.

Take some of the gold star paper and your Happy Day Banner Dies and cut out the Happy Day banner and then from white card stock cut out the two solid banner dies. Adhere the white banners to the back of the Happy Day banners. Cut your Happy Day banner into to and adhere across your inside middle panel with happy going across the top and day coming from the left meeting up with the bottom of the “a” banner.

For the front panel stamp the “let’s celebrate” greeting from Sentimental Park in Lost Lagoon ink onto white card stock and then use a layered label die (not sure what set these are from) and the bottom layer can be cut from the gold star paper. Adhere your labels together and adhere to the front of your card overhanging across some of your showing blue checked paper. Add a few embellishment gems for decoration and a bow tied from the Bakers Twine Essentials pack in the grey color to match the leaves in the floral paper.

What a great birthday card for anyone you know

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.

Cards, Papercrafting

Floral Delight Happy Birthday Card

April 27, 2026 No Comments

I saw a card like this and hadn’t saw this style in a while so thought I would make one. I used the Floral Delight designer series paper and Delightful Wishes stamps and dies from Stampin’ Up to make this one.

To create this card, you just need a few things:

Old Olive card stock (Stampin’ Up)
Pecan Pie card stock (Stampin’ Up)
Daffodil Delight (Stampin’ Up)
White card stock
Floral Delight designer series paper (retired Stampin’ Up)
Delightful Wishes stamp set and dies (retired Stampin’ Up)
Lemon Lolly ink (Stampin’ Up)
Paper trimmer
Adhesive of choice

To start your card base, cut a piece of Old Olive to 4 ¼” x 5 ½”. From white card stock cut a piece to 5 ¼” x 6” and fold in half to 3” x 5 ¼” and another piece to 1” x 5 ¼”. Take your Floral Delight designer series paper find the yellow gingham paper and cut a piece to 2 7/8” x 5 1/8” and the yellow floral with the branches to 7/8” x 5 1/8”.

Take the white folded piece and adhere to the left side of the Old Olive card base, opening from the right. Adhere the yellow gingham piece to the front of it. Adhere your 1” white piece to the right side of your Old Olive card base and adhere the floral strip to it.

From a scrap piece of old olive use the larger wishing die to cut out. From Daffodil Delight cut out the smaller wishing, adhere them together. Tip, use adhesive sheets to back your Daffodil Delight card stock piece before you cut it out, but not your Old Olive piece as some of that won’t have adhesive because it hangs over the edge. From a scrap piece of white card stock stamp the multi-flower stamp base in Lemon Lolly and then the top layer in Daffodil Delight and cut out with the die. Use Pecan Pie card stock and the stick die to cut out. Stamp two of the double leaves, cut out with the dies and then cut them into individuals so you have four leaves. Adhere your leaves and flower pieces randomly to your stem and then adhere your stem to the front left side of your card front toward the top. Then on a scrap piece of white stamp the “you a happy birthday” in Old Olive ink and use the long slim die to cut it out. Adhere that at the bottom of your card centered on the full card, so hanging over the edge of the card opening slightly and then adhere your “wishing” above that, again with part of your “g” hanging over.

For the inside is used an old block stamp greeting saying ”I can’t think of a nicer person to celebrate!” in Old Olive ink, I don’t know what stamp set it was from.

What a bright and cheery birthday card for someone you care about.

If you are interested in seeing other card ideas, please visit my blog at www.daisychainfun.com or follow my website.

All cards are handmade and photos taken by DaisyChainFun.